Genuine Victory, Indian & Polaris Rubber Bumper — OEM Part #5412067
Get your Victory or Indian motorcycle, or Polaris off-road vehicle looking right again with a genuine Victory, Indian & Polaris Rubber Bumper. It is made to Victory's original dimensions, so it lines up with the panels around it and bolts on without trimming.
Body parts like fenders, side covers, fairings and fuel tank trim protect the frame, wiring and rider, and they define the look of the bike. Because Victory, Indian and Polaris are all Polaris Inc. brands, this part number is shared across Victory motorcycles, Indian motorcycles and Polaris off-road vehicles. Every model it fits is listed below.
Rubber Bumper at a Glance
-
OEM part number: 5412067
-
Brand: Victory, Indian & Polaris (genuine Polaris-made OEM part)
-
Part type: Bumper
-
Victory fitment: Cross Country, Cross Roads, Hammer, Jackpot, Kingpin, Octane, V92, Vegas and Vision, 2001–2017
-
Indian fitment: Challenger, Chief, Chieftain, Dark Horse, Pursuit, Roadmaster and Springfield, 2014–2026
-
Polaris off-road fitment: ACE, General, Hawkeye, RZR, Ranger, Scrambler, Sportsman and Xpedition, 2010–2026
-
Condition: New
Models and Years This Rubber Bumper Fits
Genuine part #5412067 fits the models and years below, across Victory motorcycles, Indian motorcycles and Polaris off-road vehicles. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Victory Motorcycle Fitment
| Model |
Model Years |
| Victory Cross Country |
2010 |
| Victory Cross Roads |
2010 |
| Victory Hammer |
2005–2017 |
| Victory Jackpot |
2006–2008 |
| Victory Kingpin |
2004–2011 |
| Victory Octane |
2017 |
| Victory V92 CA Classic Cruiser |
2003 |
| Victory V92 SC |
2001–2002 |
| Victory V92 TC |
2002–2006 |
| Victory Vegas |
2003–2009 |
| Victory Vision |
2008–2009 |
| Victory Vision Tour |
2009 |
Indian Motorcycle Fitment
55 Indian model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Indian Challenger |
2020–2026 |
12 |
| Indian Chief |
2014–2017 |
3 |
| Indian Chieftain |
2014–2017, 2019–2025 |
18 |
| Indian Dark Horse |
2022 |
1 |
| Indian Pursuit |
2022–2025 |
11 |
| Indian Roadmaster |
2015–2017, 2020, 2025 |
6 |
| Indian Springfield |
2016–2017, 2020–2025 |
4 |
Polaris Off-Road Vehicle Fitment
466 Polaris model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Polaris ACE |
2016–2019 |
11 |
| Polaris General |
2016–2026 |
54 |
| Polaris Hawkeye |
2014–2015 |
2 |
| Polaris RZR |
2020–2023 |
7 |
| Polaris Ranger |
2010–2015, 2017–2026 |
155 |
| Polaris Scrambler |
2014–2026 |
18 |
| Polaris Sportsman |
2013–2026 |
213 |
| Polaris Xpedition |
2024–2026 |
6 |
Yes, a motorcycle part can fit an ATV or side-by-side: Polaris uses many of the same fasteners, seals, filters and electrical parts across its motorcycle and off-road lines, so this part number also appears in the Polaris off-road parts catalog.
Why Choose a Genuine Victory, Indian & Polaris OEM Rubber Bumper?
- Factory shape, mounting points and panel gaps
- No drilling or trimming
- Protects wiring, electronics and the frame
- Keeps the bike looking original
- Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years
Features and Materials
Key Features
- Genuine Victory, Indian & Polaris OEM body part, part #5412067
- Original mounting tabs and hardware locations
- Factory finish where applicable (some parts ship primed or in base color)
- Designed for the listed Victory, Indian & Polaris models
- Works with original grommets, clips and fasteners
Materials and Construction
Victory body parts use impact-resistant ABS and polycarbonate plastics, steel or aluminum fenders, and factory-finish paint or chrome depending on the part.
Common Reasons Riders Replace This Part
- Replacing a panel damaged in a tip-over or crash
- Restoring a bike for sale or show
- Repainting or changing color
- Replacing broken mounting tabs
Signs Your Rubber Bumper Needs Replacing
- Cracks, chips or broken tabs
- Panels that rattle or will not seat
- Faded or peeling paint
- Missing pieces after a tip-over
- Loose hardware or worn grommets
Installation Tips
- Find the panel on the Victory parts diagram to see its hardware and grommets.
- Remove adjoining panels or seat as needed.
- Transfer badges and hardware you plan to reuse, or order new ones.
- Fit the panel with fasteners finger-tight, check the gaps, then tighten.
- Replace hardened grommets so the panel does not rattle.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #5412067 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Rubber Bumper with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory, Indian & Polaris Rubber Bumper?
The genuine part number is 5412067. Use it to match this part to your factory parts diagram.
Which Victory motorcycles does part #5412067 fit?
It fits 12 Victory models (Cross Country, Cross Roads, Hammer, Jackpot, Kingpin, Octane, V92, Vegas and Vision) from 2001 to 2017. See the Victory fitment table above.
Does part #5412067 fit Indian motorcycles?
Yes. It fits 55 Indian models (Challenger, Chief, Chieftain, Dark Horse, Pursuit, Roadmaster and Springfield) from 2014 to 2026. See the Indian fitment table above.
Does it fit Polaris ATVs or side-by-sides?
Yes. The same part number is used on 466 Polaris off-road models, including the ACE, General, Hawkeye, RZR, Ranger, Scrambler, Sportsman and Xpedition. See the Polaris table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory, Indian and Polaris models, not an aftermarket copy.
Does this come painted?
It depends on the part number. Check the product title and photos for the color; some parts ship in base color or primer.
Do I need new grommets or screws?
Old grommets harden and crack. Replacing them with the panel stops rattles; they are on the same parts diagram.
Will it fit an Indian?
Only if Indian models are listed in the fitment table below.
Order Your Genuine Victory, Indian & Polaris Rubber Bumper Today
Victory parts get harder to find every year. Order the genuine Victory, Indian & Polaris Rubber Bumper, OEM part #5412067, from Witchdoctors today and keep your Victory or Indian motorcycle, or Polaris off-road vehicle running the way it was built.
Where to Ride Your Victory or Indian
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.