Genuine Can-Am Bushing — OEM Part #708001129
Keep your Outlander models running cool under load with a genuine Can-Am Bushing. It connects to the original hoses, mounts and wiring, so you get the factory cooling performance BRP engineered for hot days, slow crawling and heavy work.
The radiator, water pump, fan, thermostat, hoses and reservoir work together to hold engine temperature steady. If one part fails, the whole system suffers. This part is confirmed for 64 Can-Am models from 2013 to 2024. See the full fitment list below.
Bushing at a Glance
-
OEM part number: 708001129
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Radiators & Components
-
Fits: Outlander ATV models, 2013–2024
-
Condition: New
Can-Am Models and Years This Bushing Fits
Genuine Can-Am part #708001129 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 64 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am Outlander ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Outlander 4x4 |
2018 |
7 |
| Can-Am Outlander 6x6 |
2018–2022 |
10 |
| Can-Am Outlander 450 |
2021 |
1 |
| Can-Am Outlander 570 |
2018–2023 |
11 |
| Can-Am Outlander 650 |
2013–2022 |
11 |
| Can-Am Outlander 800R |
2015 |
1 |
| Can-Am Outlander 850 |
2016–2024 |
4 |
| Can-Am Outlander 1000 |
2013–2015 |
1 |
| Can-Am Outlander 1000R |
2016–2024 |
5 |
| Can-Am Outlander EFI |
2019–2022 |
7 |
| Can-Am Outlander Intl |
2021 |
1 |
| Can-Am Outlander L |
2016–2017 |
1 |
| Can-Am Outlander PRO |
2018 |
4 |
Why Choose a Genuine Can-Am OEM Bushing?
- Factory flow and capacity for your engine
- Direct-fit connections with no adapters
- Heat- and pressure-resistant construction
- Helps prevent overheating and head gasket failure
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM cooling part, part #708001129
- Original hose sizes, mounts and connectors
- Built for the pressure and temperature of the listed engines
- Designed for mud, dust and debris
- Works with BRP-approved coolant
Materials and Construction
Can-Am cooling parts use aluminum radiator cores, reinforced rubber hoses rated for hot coolant under pressure, glass-reinforced plastic housings and steel or stainless clamps.
Common Reasons Riders Replace This Part
- Fixing coolant leaks and overheating
- Replacing parts damaged by mud packing or debris
- Preventive replacement of aging hoses and seals
- Restoring cooling after an engine rebuild
Signs Your Bushing Needs Replacing
- Temperature warning or rising gauge
- Coolant leaks or a sweet smell after riding
- A fan that does not run or makes noise
- Cracked, swollen or soft hoses
- Coolant bubbling or boiling over in the reservoir
Installation Tips
- Let the engine cool completely before opening the system.
- Drain coolant into a container and dispose of it properly.
- Install the new part with fresh clamps, gaskets and O-rings where specified.
- Refill with the coolant in your Can-Am manual and bleed air from the system.
- Run to operating temperature, check for leaks and top up the reservoir.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #708001129 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Bushing with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Bushing?
The genuine Can-Am part number is 708001129. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #708001129 fit?
It fits 64 Can-Am Outlander models from 2013 to 2024. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
What coolant should I use?
Use the coolant type and mix in your Can-Am operator's guide. Mixing coolant types can cause gelling or corrosion.
Do I need to bleed the cooling system?
Yes. Trapped air causes hot spots and overheating. Follow the procedure for your model.
Why does my machine overheat in mud?
Mud packed in the radiator fins blocks airflow. Clean the radiator regularly from the back side with low-pressure water.
Order Your Genuine Can-Am Bushing Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Bushing, OEM part #708001129, from Witchdoctors today and keep your Outlander models running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.