Genuine Can-Am Bushing — OEM Part #S19012RCA000
Overheating can end a ride and ruin an engine. The genuine Can-Am Bushing restores factory cooling performance on your DS 250, with the exact fit, connections and flow the system was designed around.
The radiator, water pump, fan, thermostat, hoses and reservoir work together to hold engine temperature steady. If one part fails, the whole system suffers. This part is confirmed for 1 Can-Am model from 2010 to 2026. See the full fitment list below.
Bushing at a Glance
-
OEM part number: S19012RCA000
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Radiators & Components
-
Fits: DS youth and sport ATV models, 2010–2026
-
Condition: New
Can-Am Models and Years This Bushing Fits
Genuine Can-Am part #S19012RCA000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am DS youth and sport ATV Fitment
| Model |
Model Years |
| Can-Am DS 250 |
2010–2026 |
Why Choose a Genuine Can-Am OEM Bushing?
- Factory flow and capacity for your engine
- Direct-fit connections with no adapters
- Heat- and pressure-resistant construction
- Helps prevent overheating and head gasket failure
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM cooling part, part #S19012RCA000
- Original hose sizes, mounts and connectors
- Built for the pressure and temperature of the listed engines
- Designed for mud, dust and debris
- Works with BRP-approved coolant
Materials and Construction
Can-Am cooling parts use aluminum radiator cores, reinforced rubber hoses rated for hot coolant under pressure, glass-reinforced plastic housings and steel or stainless clamps.
Common Reasons Riders Replace This Part
- Fixing coolant leaks and overheating
- Replacing parts damaged by mud packing or debris
- Preventive replacement of aging hoses and seals
- Restoring cooling after an engine rebuild
Signs Your Bushing Needs Replacing
- Temperature warning or rising gauge
- Coolant leaks or a sweet smell after riding
- A fan that does not run or makes noise
- Cracked, swollen or soft hoses
- Coolant bubbling or boiling over in the reservoir
Installation Tips
- Let the engine cool completely before opening the system.
- Drain coolant into a container and dispose of it properly.
- Install the new part with fresh clamps, gaskets and O-rings where specified.
- Refill with the coolant in your Can-Am manual and bleed air from the system.
- Run to operating temperature, check for leaks and top up the reservoir.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #S19012RCA000 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Bushing with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Bushing?
The genuine Can-Am part number is S19012RCA000. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #S19012RCA000 fit?
It fits the DS 250 (2010–2026).
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
What coolant should I use?
Use the coolant type and mix in your Can-Am operator's guide. Mixing coolant types can cause gelling or corrosion.
Do I need to bleed the cooling system?
Yes. Trapped air causes hot spots and overheating. Follow the procedure for your model.
Why does my machine overheat in mud?
Mud packed in the radiator fins blocks airflow. Clean the radiator regularly from the back side with low-pressure water.
Order Your Genuine Can-Am Bushing Today
Get your DS 250 back to factory condition. Add the genuine Can-Am Bushing (part #S19012RCA000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.