Genuine Kawasaki Bushing — OEM Part #92139-1143
Steer with confidence again with a genuine Kawasaki Bushing. Built for the Teryx models, it matches the factory splines, joints and mounting points, so the steering feels tight and works with electric power steering (EPS) where equipped.
The steering wheel or handlebar, column, rack, tie rods and EPS unit all affect control. Play or binding in any one part shows up as vague or heavy steering. This part is confirmed for 20 Kawasaki models from 2022 to 2027. See the full fitment list below.
Bushing at a Glance
-
OEM part number: 92139-1143
-
Brand: Kawasaki (genuine factory part)
-
Part type: Steering Column
-
Fits: Teryx recreation side-by-side models, 2022–2027
-
Condition: New
Kawasaki Models and Years This Bushing Fits
Genuine Kawasaki part #92139-1143 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Teryx recreation side-by-side Fitment
| Model |
Model Years |
| Kawasaki Teryx KRX 1000 |
2022–2027 |
| Kawasaki Teryx KRX 1000 Blackout Edition |
2025–2027 |
| Kawasaki Teryx KRX 1000 ES |
2023–2025 |
| Kawasaki Teryx KRX 1000 Lifted Edition |
2025 |
| Kawasaki Teryx KRX 1000 Rock Edition |
2026 |
| Kawasaki Teryx KRX 1000 SE |
2024 |
| Kawasaki Teryx KRX 1000 Special Edition |
2022–2024 |
| Kawasaki Teryx KRX 1000 TR |
2027 |
| Kawasaki Teryx KRX 1000 Trail Edition |
2022–2025 |
| Kawasaki Teryx KRX4 1000 |
2025–2027 |
| Kawasaki Teryx KRX4 1000 Blackout Edition |
2025–2027 |
| Kawasaki Teryx KRX4 1000 ES |
2023–2024, 2027 |
| Kawasaki Teryx KRX4 1000 ES Special Edition |
2023–2024 |
| Kawasaki Teryx KRX4 1000 SE |
2023–2024 |
| Kawasaki Teryx KRX4 1000 SE ES |
2024 |
| Kawasaki Teryx KRX4 1000 Special Edition |
2023 |
| Kawasaki Teryx KRX4 1000 TR |
2027 |
| Kawasaki Teryx4 H2 |
2026 |
| Kawasaki Teryx4 H2 Deluxe ES |
2026 |
| Kawasaki Teryx5 H2 Deluxe ES |
2026 |
Why Choose a Genuine Kawasaki OEM Bushing?
- Factory fit with the rack, column and linkage
- Restores tight, precise steering
- Works with Kawasaki EPS where equipped
- Helps keep alignment and tire wear in check
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM steering part, part #92139-1143
- Original splines, threads and joints
- Corrosion- and impact-resistant construction
- Designed for the listed Kawasaki models
- Works with factory EPS units, sensors and wiring where applicable
Materials and Construction
Kawasaki steering parts use hardened steel shafts, racks and tie-rod ends with sealed joints, aluminum or steel housings, and sealed EPS motors and modules built for water and vibration.
Common Reasons Owners Replace This Part
- Fixing play, clunks or wandering
- Replacing bent tie rods or shafts after an impact
- Repairing EPS faults or heavy steering
- Restoring steering on a high-hour machine
Signs Your Bushing Needs Replacing
- Free play in the steering
- Clunking when turning
- Heavy steering or an EPS warning
- Bent tie rods or an off-center wheel or handlebar
- Torn boots on tie-rod ends or the rack
Installation Tips
- Point the wheels straight before disconnecting parts.
- Use the Kawasaki parts diagram for hardware, cotter pins and EPS connectors.
- Disconnect the battery before working on EPS parts.
- Match the original spline position or tie-rod length.
- Torque to spec, set toe and check lock-to-lock travel.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #92139-1143 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Bushing with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Bushing?
The genuine Kawasaki part number is 92139-1143. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #92139-1143 fit?
It fits 20 Kawasaki Teryx models from 2022 to 2027. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after steering work?
Yes. Set toe to prevent wander and tire wear.
Does EPS need a reset after service?
Some systems need a reset or calibration. Check your service manual or ask a dealer.
Can a bent steering part be straightened?
No. Always replace bent steering parts.
Order Your Genuine Kawasaki Bushing Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Bushing, OEM part #92139-1143, from Witchdoctors today and keep your Teryx models running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.