Genuine Yamaha Bushing — OEM Part #1XD-F4571-00-00
Keep your Viking or Viking VI working with a genuine Yamaha Bushing. This OEM part is built to Yamaha's original specification, so it works with the factory bed, rack or hitch without guesswork.
Beds, racks, storage bins and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water ruin what you carry. This part is confirmed for 26 Yamaha models from 2014 to 2026. See the full fitment list below.
Bushing at a Glance
-
OEM part number: 1XD-F4571-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Cargo & Dump Box Repair
-
Fits: Viking utility side-by-side models, 2014–2026
-
Condition: New
Yamaha Models and Years This Bushing Fits
Genuine Yamaha part #1XD-F4571-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Viking utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Viking |
2014–2020 |
| Yamaha Viking 700 |
2014 |
| Yamaha Viking 700 EPS |
2014 |
| Yamaha Viking 700 EPS Hunte |
2014 |
| Yamaha Viking 700 EPS Hunter |
2014 |
| Yamaha Viking 700 EPS SE |
2014 |
| Yamaha Viking 700 Hunter |
2014 |
| Yamaha Viking EPS |
2014–2026 |
| Yamaha Viking EPS Hunter |
2015–2021 |
| Yamaha Viking EPS Hunting |
2022 |
| Yamaha Viking EPS Ranch |
2018–2026 |
| Yamaha Viking EPS Ranch Edition |
2018–2023 |
| Yamaha Viking EPS SE |
2014–2017, 2019 |
| Yamaha Viking EPS Special E |
2016, 2019 |
| Yamaha Viking Hunter |
2015–2016 |
| Yamaha Viking VI |
2015–2016 |
| Yamaha Viking VI 700 EPS |
2015 |
| Yamaha Viking VI EPS |
2015–2025 |
| Yamaha Viking VI EPS Hunter |
2015–2022 |
| Yamaha Viking VI EPS Huntin |
2022 |
| Yamaha Viking VI EPS Ranch |
2016–2025 |
| Yamaha Viking VI EPS Ranch Edition |
2019–2024 |
| Yamaha Viking VI EPS SE |
2015–2017 |
| Yamaha Viking VI EPS Special |
2017 |
| Yamaha Viking VI EPS Special Edition |
2016 |
| Yamaha Viking VI Hunter |
2015–2016 |
Why Choose a Genuine Yamaha OEM Bushing?
- Factory fit with the original bed, rack, box or frame
- Restores secure latching and load retention
- Keeps stored gear protected from water and dust
- Built for the rated cargo and towing use of the listed models
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM part, part #1XD-F4571-00-00
- Original mounting points and hardware
- Made for the vibration and loads of work and trail use
- Corrosion-resistant finish or UV-stable plastic, depending on the part
- Works with factory latches, gas struts and dump-bed hardware
Materials and Construction
Yamaha cargo and storage parts use high-strength steel for load-bearing brackets, racks, beds and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals help keep moisture out.
Common Reasons Riders Replace This Part
- Hauling tools, feed, firewood and equipment
- Towing within the rated limits for your model
- Keeping gear dry in factory storage
- Repairing a bed, tailgate or box after damage
Signs Your Bushing Needs Replacing
- Tailgates or lids that will not stay latched
- Cracked bins, boxes or bed panels
- Bent or broken rack and hitch brackets
- Torn or missing seals that let water in
- Dump-bed latches or struts that no longer hold
Installation Tips
- Empty the bed or compartment and support lids or beds before removing parts.
- Use the Yamaha parts diagram to identify fasteners and linkage.
- Remove the worn part and inspect nearby hinges, latches and brackets.
- Install with hardware finger-tight, check alignment, then torque to spec.
- Test latches, hinges and load security before carrying a full load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #1XD-F4571-00-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Bushing with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Bushing?
The genuine Yamaha part number is 1XD-F4571-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #1XD-F4571-00-00 fit?
It fits 26 Yamaha Viking models from 2014 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Does this change my cargo or towing capacity?
No. Capacities are set by Yamaha for your model. This part restores factory function only.
Will it fit aftermarket racks or accessories?
It is designed for the factory Yamaha setup on the listed models. Aftermarket accessories may need their own hardware.
Should I replace the latch hardware too?
If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.
Order Your Genuine Yamaha Bushing Today
Ride with confidence on parts built for your machine. Order the genuine Yamaha Bushing, OEM part #1XD-F4571-00-00, from Witchdoctors today and keep your Viking or Viking VI running the way Yamaha designed it.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.