Genuine Yamaha A-Arm Bushing — OEM Part #2HR-23526-00-00
Worn suspension parts turn a smooth ride into a punishing one and make handling unpredictable. The genuine Yamaha A-Arm Bushing restores the factory geometry, travel and ride quality of your Yamaha ATV or side-by-side.
A-arms, trailing arms, swingarms, shocks, springs, stabilizers, knuckles and bushings control wheel movement and alignment. Bent or worn parts cause wandering, uneven tire wear and harsh handling. This part is confirmed for 28 Yamaha models from 2004 to 2014. See the full fitment list below.
A-Arm Bushing at a Glance
-
OEM part number: 2HR-23526-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: A-Arm Bushing Kit
-
Fits: Big Bear utility ATV, Grizzly utility ATV, Pro Hauler utility side-by-side and Wolverine recreation side-by-side models, 2004–2014
-
Condition: New
Yamaha Models and Years This A-Arm Bushing Fits
Genuine Yamaha part #2HR-23526-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Big Bear utility ATV Fitment
| Model |
Model Years |
| Yamaha Big Bear 4WD Hunting |
2012 |
| Yamaha Big Bear 250 |
2008–2009 |
| Yamaha Big Bear 400 4WD |
2008–2012 |
| Yamaha Big Bear 400 4WD Hunting |
2008–2011 |
Yamaha Grizzly utility ATV Fitment
| Model |
Model Years |
| Yamaha Grizzly 350 |
2014 |
| Yamaha Grizzly 350 2WD |
2008–2011, 2014 |
| Yamaha Grizzly 350 4WD |
2008–2014 |
| Yamaha Grizzly 350 4WD Hunting |
2008–2013 |
| Yamaha Grizzly 350 Hunting 4WD |
2014 |
| Yamaha Grizzly 350 IRS 4WD |
2008–2011 |
| Yamaha Grizzly 350 IRS 4WD Hunting |
2008–2011 |
| Yamaha Grizzly 400 4WD |
2008 |
| Yamaha Grizzly 400 4WD Hunting |
2008 |
| Yamaha Grizzly 450 |
2014 |
| Yamaha Grizzly 450 4WD |
2008–2013 |
| Yamaha Grizzly 450 4WD Hunting |
2009–2013 |
| Yamaha Grizzly 450 EPS |
2014 |
| Yamaha Grizzly 450 EPS 4WD |
2011–2013 |
| Yamaha Grizzly 450 EPS 4WD Hunting |
2011–2013 |
| Yamaha Grizzly 450 EPS Hunting |
2014 |
| Yamaha Grizzly 450 Hunting |
2008, 2014 |
| Yamaha Grizzly 450 SE |
2008 |
Yamaha Pro Hauler utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Pro Hauler 700 |
2004–2006 |
| Yamaha Pro Hauler 700 2WD |
2006 |
Yamaha Wolverine recreation side-by-side Fitment
| Model |
Model Years |
| Yamaha Wolverine 350 2WD |
2008–2009 |
| Yamaha Wolverine 450 4WD |
2008–2010 |
| Yamaha Wolverine 450 4x4 Sport |
2008 |
| Yamaha Wolverine 450 4x4 Sport SE |
2008 |
Why Choose a Genuine Yamaha OEM A-Arm Bushing?
- Factory geometry for straight tracking
- Correct bushing and ball joint fit
- Restores original ride height and travel
- Spreads loads across the frame as Yamaha designed
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM suspension part, part #2HR-23526-00-00
- Original mounting points and dimensions
- Corrosion-resistant coating where applicable
- Built for full-travel off-road and work use
- Works with factory bushings, ball joints and hardware
Materials and Construction
Yamaha suspension parts use high-strength steel for arms, knuckles and links with corrosion-resistant coatings, rubber or polymer bushings, and shocks with steel bodies, chromed shafts and oil or gas damping.
Common Reasons Riders Replace This Part
- Replacing bent arms, knuckles or links after an impact
- Fixing clunks and wandering from worn bushings
- Restoring ride height and damping
- Rebuilding the suspension on a high-hour machine
Signs Your A-Arm Bushing Needs Replacing
- Clunking or knocking over bumps
- Wandering, pulling or loose handling
- Uneven or rapid tire wear
- Visible bends, cracks or leaking shocks
- Play in ball joints or bushings
Installation Tips
- Support the machine safely with the suspension unloaded.
- Check the Yamaha parts diagram for bushings, ball joints and hardware.
- Remove the damaged part and inspect the frame mounts.
- Install, tightening pivot bolts at ride height if the manual specifies.
- Torque all hardware, set toe, and recheck after the first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your A-Arm Bushing with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha A-Arm Bushing?
The genuine Yamaha part number is 2HR-23526-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #2HR-23526-00-00 fit?
It fits 28 Yamaha Big Bear, Grizzly, Pro Hauler and Wolverine models from 2004 to 2014. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after replacing suspension parts?
Yes, check and set toe after installation.
Should I replace both sides?
For wear items like bushings and shocks, replace in pairs to keep handling balanced.
Is OEM better than aftermarket suspension?
OEM restores factory ride and geometry. Aftermarket arms may add strength or travel but often change geometry.
Order Your Genuine Yamaha A-Arm Bushing Today
Get your Yamaha ATV or side-by-side back to factory condition. Add the genuine Yamaha A-Arm Bushing (part #2HR-23526-00-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.