Genuine Polaris Bushing, Right — OEM Part #5434546
Worn suspension parts turn a smooth ride into a punishing one and make handling unpredictable. The genuine Polaris Bushing, Right restores the factory geometry, travel and ride quality of your Polaris ATV or side-by-side.
A-arms, trailing arms, shocks, springs, sway bars, knuckles and bushings control wheel movement and alignment. Bent or worn parts cause wandering, uneven tire wear and harsh handling. This part is confirmed for 27 Polaris models from 1999 to 2013. See the full fitment list below.
Bushing, Right at a Glance
-
OEM part number: 5434546
-
Brand: Polaris (genuine factory part)
-
Part type: Swingarm Repair
-
Position: Right
-
Fits: Ranger utility side-by-side, Scrambler ATV, Series 10/11 ATV, Sportsman ATV, Trail Blazer ATV and Trail Boss ATV models, 1999–2013
-
Condition: New
Polaris Models and Years This Bushing Fits
Genuine Polaris part #5434546 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger |
1999 |
| Polaris Ranger 2x4 |
2004–2005 |
| Polaris Ranger 4x4 |
2004–2005 |
| Polaris Ranger 6x6 |
2004–2005 |
| Polaris Ranger 6x6 700 EFI |
2006–2009 |
| Polaris Ranger 500 Tm 2x4 |
2006 |
| Polaris Ranger 700 Commercial EFI 6x6 |
2002 |
| Polaris Ranger 700 EFI 6x6 |
2006 |
| Polaris Ranger Tm |
2004–2006 |
| Polaris Series 10 Ranger 500 4x4 |
2003 |
| Polaris Series 11 Ranger |
2003 |
Polaris Scrambler ATV Fitment
| Model |
Model Years |
| Polaris Scrambler 2x4 (International) |
2008–2009 |
| Polaris Scrambler 500 2x4 (International) |
2007 |
| Polaris Scrambler 500 4x4 |
2003–2012 |
Polaris Series 10/11 ATV Fitment
| Model |
Model Years |
| Polaris Series 10 Ptv 6x6 |
2003 |
| Polaris Series 10 UTV 2x4 |
2003 |
| Polaris Series 10 UTV 4x4 |
2003 |
| Polaris Series 11 UTV 2x4 |
2003 |
| Polaris Series 11 UTV 4x4 |
2003 |
| Polaris Series 11 UTV 6x6 |
2003 |
Polaris Sportsman ATV Fitment
| Model |
Model Years |
| Polaris Sportsman 6x6 |
2003–2008 |
Polaris Trail Blazer ATV Fitment
| Model |
Model Years |
| Polaris Trail Blazer |
2004–2006 |
| Polaris Trail Blazer 250 |
2003 |
| Polaris Trail Blazer 330 |
2008–2013 |
| Polaris Trail Blazer 400 |
2003 |
Polaris Trail Boss ATV Fitment
| Model |
Model Years |
| Polaris Trail Boss 330 |
2003–2013 |
| Polaris Trail Boss 330 Intl |
2010–2012 |
Why Choose a Genuine Polaris OEM Bushing?
- Factory geometry for straight tracking
- Correct bushing and ball joint fit
- Restores original ride height and travel
- Spreads loads across the frame as designed
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM suspension part, part #5434546
- Original mounting points and dimensions
- Corrosion-resistant coating where applicable
- Built for full-travel off-road use
- Works with factory bushings, ball joints and hardware
Materials and Construction
Polaris suspension parts use high-strength steel for arms, knuckles and links with corrosion-resistant coatings, rubber or polymer bushings, and shocks with steel bodies, chromed shafts and oil or nitrogen damping.
Common Reasons Riders Replace This Part
- Replacing bent arms, knuckles or links after an impact
- Fixing clunks and wandering from worn bushings
- Restoring ride height and damping
- Rebuilding the suspension on a high-hour machine
Signs Your Bushing Needs Replacing
- Clunking or knocking over bumps
- Wandering, pulling or loose handling
- Uneven or rapid tire wear
- Visible bends, cracks or leaking shocks
- Play in ball joints or bushings
Installation Tips
- Support the machine safely with the suspension unloaded.
- Check the Polaris parts diagram for bushings, ball joints and hardware.
- Remove the damaged part and inspect the frame mounts.
- Install, tightening pivot bolts at ride height if the manual specifies.
- Torque all hardware, set toe, and recheck after the first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Bushing with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Bushing?
The genuine Polaris part number is 5434546. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5434546 fit?
It fits 27 Polaris Ranger, Scrambler, Series, Sportsman, Trail Blazer and Trail Boss models from 1999 to 2013. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after replacing suspension parts?
Yes, check and set toe after installation.
Should I replace both sides?
For wear items like bushings and shocks, replace in pairs to keep handling balanced.
Is OEM better than aftermarket suspension?
OEM restores factory ride and geometry. Aftermarket arms may add strength or travel but often change geometry.
Order Your Genuine Polaris Bushing Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Bushing, Right (part #5434546) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.