Genuine Can-Am Cable Bracket — OEM Part #420251291
When you are inside the engine, there is no room for guesswork. The genuine Can-Am Cable Bracket is built to the exact tolerances of the original part in your Defender HD11 or Traxter HD11, so it fits the mating parts correctly and keeps the Rotax engine running the way BRP designed it.
Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 14 Can-Am models from 2026. See the full fitment list below.
Cable Bracket at a Glance
-
OEM part number: 420251291
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Crankcase & Components
-
Fits: Defender utility side-by-side and Traxter utility side-by-side models, 2026
-
Condition: New
Can-Am Models and Years This Cable Bracket Fits
Genuine Can-Am part #420251291 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Defender utility side-by-side Fitment
| Model |
Model Years |
| Can-Am Defender HD11 LTD Cab |
2026 |
| Can-Am Defender HD11 X mr |
2026 |
| Can-Am Defender HD11 XT |
2026 |
| Can-Am Defender HD11 XT Cab |
2026 |
| Can-Am Defender HD11 XU (International) |
2026 |
| Can-Am Defender MAX HD11 Lone Star |
2026 |
| Can-Am Defender MAX HD11 Lone Star Cab |
2026 |
| Can-Am Defender MAX HD11 LTD Cab |
2026 |
| Can-Am Defender MAX HD11 X mr |
2026 |
| Can-Am Defender MAX HD11 XT |
2026 |
| Can-Am Defender MAX HD11 XT Cab |
2026 |
Can-Am Traxter utility side-by-side Fitment
| Model |
Model Years |
| Can-Am Traxter HD11 XT (Europe) |
2026 |
| Can-Am Traxter HD11 XU (International) |
2026 |
| Can-Am Traxter MAX HD11 XU (International) |
2026 |
Why Choose a Genuine Can-Am OEM Cable Bracket?
- Factory tolerances for correct clearances and fit
- Designed to work with the other OEM parts in the Rotax engine
- Helps protect any applicable BRP warranty coverage
- Lowers the risk of a repeat teardown from a poor-fitting part
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM engine part, part #420251291
- Machined to BRP's original specifications
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the listed engines
- Pairs with the gaskets and seals on the same parts diagram
Materials and Construction
Rotax engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened, heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with elastomer oil seals.
Common Reasons Riders Replace This Part
- Full or partial engine rebuilds
- Repairs after overheating or oil starvation
- Fixing oil leaks at cases, covers and seals
- Restoring compression and power on a high-hour engine
Signs Your Cable Bracket Needs Replacing
- Oil leaks around covers, cases or seals
- Ticking, knocking or rattling from the engine
- Low compression or noticeable power loss
- Blue or white smoke, or high oil use
- Metal debris in the oil or on the drain plug magnet
Installation Tips
- Follow the BRP service manual for your model; engine work needs exact procedures and torque specs.
- Clean all mating surfaces and replace any gaskets and seals you disturb.
- Measure critical clearances with proper tools before final assembly.
- Lubricate moving parts with clean engine oil or assembly lube as specified.
- Torque fasteners in sequence, refill fluids and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #420251291 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Cable Bracket with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Cable Bracket?
The genuine Can-Am part number is 420251291. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #420251291 fit?
It fits 14 Can-Am Defender and Traxter models from 2026 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Should I replace gaskets and seals at the same time?
Yes. Replace any gasket or seal you disturb. They are on the same Can-Am parts diagram.
Is OEM worth it over aftermarket engine parts?
For internals, OEM parts match the exact clearances the Rotax engine was designed around, which helps avoid noise, wear and leaks.
Can I do this repair myself?
Experienced home mechanics can do many engine repairs with the service manual and the right tools. Precision internal work is best left to a qualified technician if you are not set up for it.
Order Your Genuine Can-Am Cable Bracket Today
Get your Defender HD11 or Traxter HD11 back to factory condition. Add the genuine Can-Am Cable Bracket (part #420251291) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.