Genuine Polaris Cam Chain Tensioner Guide — OEM Part #3022151
When you are inside the engine, there is no room for guesswork. The genuine Polaris Cam Chain Tensioner Guide is built to the exact tolerances of the original part in your Polaris ATV or side-by-side, so it fits the mating parts correctly and keeps the engine running the way it was designed.
Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 304 Polaris models from 2013 to 2026. See the full fitment list below.
Cam Chain Tensioner Guide at a Glance
-
OEM part number: 3022151
-
Brand: Polaris (genuine factory part)
-
Part type: Cams & Components
-
Fits: ACE single-seat, General crossover side-by-side, other Polaris, RZR sport side-by-side, Ranger utility side-by-side, Sportsman ATV and Xpedition adventure side-by-side models, 2013–2026
-
Condition: New
Polaris Models and Years This Cam Chain Tensioner Guide Fits
Genuine Polaris part #3022151 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 304 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris ACE single-seat Fitment
| Model Family |
Model Years |
Trims |
| Polaris ACE 570 |
2016–2019 |
8 |
| Polaris ACE 900 |
2016–2019 |
2 |
Polaris General crossover side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris General 1000 |
2016–2026 |
22 |
| Polaris General XP |
2020–2026 |
27 |
Polaris other Polaris Fitment
| Model Family |
Model Years |
Trims |
| Polaris Polaris |
2015 |
1 |
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR |
2025 |
1 |
| Polaris RZR 64 |
2021 |
1 |
| Polaris RZR 570 |
2019–2020 |
2 |
| Polaris RZR 900 |
2018–2026 |
10 |
| Polaris RZR 1000 |
2018–2021 |
4 |
| Polaris RZR RS1 |
2019–2022 |
3 |
| Polaris RZR S |
2020 |
1 |
| Polaris RZR S4 |
2020 |
1 |
| Polaris RZR Trail |
2020–2026 |
8 |
| Polaris RZR Trctr |
2025 |
1 |
| Polaris RZR XP |
2018–2026 |
24 |
| Polaris RZR Xp4 |
2019 |
1 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
2015, 2019–2020 |
3 |
| Polaris Ranger 6P |
2017 |
1 |
| Polaris Ranger 570 |
2014–2019, 2021 |
18 |
| Polaris Ranger 900 |
2013–2019 |
6 |
| Polaris Ranger 1000 |
2018–2019, 2021, 2024–2026 |
26 |
| Polaris Ranger Back |
2020 |
2 |
| Polaris Ranger FC |
2020 |
2 |
| Polaris Ranger HD |
2020 |
1 |
| Polaris Ranger High |
2019–2020 |
2 |
| Polaris Ranger Is |
2020 |
1 |
| Polaris Ranger MD |
2018, 2024–2025 |
2 |
| Polaris Ranger Northstar |
2018–2020 |
12 |
| Polaris Ranger RC |
2020 |
2 |
| Polaris Ranger SP |
2026 |
1 |
| Polaris Ranger Texas |
2020 |
1 |
| Polaris Ranger Tx |
2020 |
1 |
| Polaris Ranger Winter |
2020 |
2 |
| Polaris Ranger XP |
2014, 2017–2019, 2021–2026 |
55 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman |
2015–2016 |
3 |
| Polaris Sportsman 450 |
2016 |
2 |
| Polaris Sportsman 570 |
2014–2017 |
24 |
| Polaris Sportsman ACE |
2015 |
3 |
| Polaris Sportsman EFI |
2016–2017 |
1 |
| Polaris Sportsman Touring |
2014–2017 |
6 |
Polaris Xpedition adventure side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Xpedition Adv |
2024–2026 |
4 |
| Polaris Xpedition XP |
2024–2026 |
4 |
| Polaris Xpedition Xp5 |
2024–2026 |
2 |
Why Choose a Genuine Polaris OEM Cam Chain Tensioner Guide?
- Factory tolerances for correct clearances and fit
- Designed to work with the other OEM parts in the engine
- Helps protect any applicable factory warranty coverage
- Lowers the risk of a repeat teardown from a poor-fitting part
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM engine part, part #3022151
- Machined to Polaris's original specifications
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the listed engines
- Pairs with the gaskets and seals on the same parts diagram
Materials and Construction
Polaris engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened, heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with elastomer oil seals.
Common Reasons Riders Replace This Part
- Full or partial engine rebuilds
- Repairs after overheating or oil starvation
- Fixing oil leaks at cases, covers and seals
- Restoring compression and power on a high-hour engine
Signs Your Cam Chain Tensioner Guide Needs Replacing
- Oil leaks around covers, cases or seals
- Ticking, knocking or rattling from the engine
- Low compression or noticeable power loss
- Blue or white smoke, or high oil use
- Metal debris in the oil or on the drain plug magnet
Installation Tips
- Follow the Polaris service manual for your model; engine work needs exact procedures and torque specs.
- Clean all mating surfaces and replace any gaskets and seals you disturb.
- Measure critical clearances with proper tools before final assembly.
- Lubricate moving parts with clean engine oil or assembly lube as specified.
- Torque fasteners in sequence, refill fluids and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #3022151 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Cam Chain Tensioner Guide with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Cam Chain Tensioner Guide?
The genuine Polaris part number is 3022151. Use it to match this part to your factory parts diagram.
Which Polaris models does part #3022151 fit?
It fits 304 Polaris ACE, General, RZR, Ranger, Sportsman and Xpedition models from 2013 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Should I replace gaskets and seals at the same time?
Yes. Replace any gasket or seal you disturb. They are on the same Polaris parts diagram.
Is OEM worth it over aftermarket engine parts?
For internals, OEM parts match the exact clearances the engine was designed around, which helps avoid noise, wear and leaks.
Can I do this repair myself?
Experienced home mechanics can do many engine repairs with the service manual and the right tools. Precision internal work is best left to a qualified technician if you are not set up for it.
Order Your Genuine Polaris Cam Chain Tensioner Guide Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Cam Chain Tensioner Guide (part #3022151) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Ride Royal Blue — Pioneer, Tennessee: a base camp for the 900+ mile North Cumberland trail network
-
Paiute ATV Trail — central Utah: 250 miles of marked trail linking to 2,000+ more