Genuine CFMoto Cam Compression Spring — OEM Part #0800-052003
When you are inside the engine, there is no room for guesswork. The genuine CFMoto Cam Compression Spring is built to the exact tolerances of the original part in your CFMoto ATV or UTV, so it fits the mating components correctly and keeps the engine running the way CFMoto designed it.
Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 4 CFMoto models from 2013 to 2018. See the full fitment list below.
Cam Compression Spring at a Glance
-
OEM part number: 0800-052003
-
Brand: CFMOTO (genuine factory part)
-
Part type: Cams & Components
-
Fits: CForce ATV, UForce utility UTV and ZForce sport UTV models, 2013–2018
-
Condition: New
CFMoto Models and Years This Cam Compression Spring Fits
Genuine CFMoto part #0800-052003 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 800 X8 |
2013–2016 |
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 800 |
2013–2016 |
CFMoto ZForce sport UTV Fitment
| Model |
Model Years |
| CFMoto ZForce 800 EX |
2014–2018 |
| CFMoto ZForce 800 Trail |
2015–2016, 2018 |
Why Choose a Genuine CFMoto OEM Cam Compression Spring?
- Factory tolerances for correct clearances and fit
- Designed to work with the other OEM parts in the engine
- Helps protect your engine and drivetrain warranty, where one applies
- Lowers the risk of repeat teardown from a poor-fitting part
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM engine part, part #0800-052003
- Machined to original CFMoto specifications
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the listed engines
- Pairs with the gaskets and seals shown on the same parts diagram
Materials and Construction
CFMoto engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened and heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with fluoroelastomer or nitrile oil seals for sealing.
Common Reasons Riders Replace This Part
- Full or partial engine rebuilds
- Repairing damage after overheating or oil starvation
- Fixing oil leaks at cases, covers and seals
- Restoring compression and power on a high-hour engine
Signs Your Cam Compression Spring Needs Replacing
- Oil leaks around covers, cases or seals
- Ticking, knocking or rattling from the engine
- Low compression or noticeable loss of power
- Blue or white smoke, or high oil consumption
- Metal debris in the oil or on the drain plug magnet
Installation Tips
- Follow the CFMoto service manual for your model. Engine work requires exact procedures and torque specs.
- Clean all mating surfaces thoroughly and replace gaskets and seals you disturb.
- Measure critical clearances with proper tools before final assembly.
- Lubricate moving parts with clean engine oil or assembly lube as specified.
- Torque fasteners in the specified sequence, then refill fluids and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #0800-052003 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Cam Compression Spring and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Cam Compression Spring with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Cam Compression Spring?
The genuine CFMoto part number is 0800-052003. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #0800-052003 fit?
It fits the CForce 800 X8 (2013–2016); UForce 800 (2013–2016); ZForce 800 EX (2014–2018); ZForce 800 Trail (2015–2016, 2018).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Should I replace gaskets and seals at the same time?
Yes. Any gasket or seal you disturb should be replaced. They are listed on the same CFMoto parts diagram, so you can order everything at once.
Is OEM worth it over aftermarket engine parts?
For internals, OEM parts are made to the exact clearances the engine was designed around, which helps avoid noise, wear and leaks that a poor fit can cause.
Can I do this repair myself?
Experienced home mechanics can do many engine repairs with the service manual and the right tools. Internal work that needs precise measurement is best left to a qualified technician if you are not set up for it.
Order Your Genuine CFMoto Cam Compression Spring Today
Get your CFMoto ATV or UTV back to factory condition. Add the genuine CFMoto Cam Compression Spring (part #0800-052003) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.