Genuine Can-Am Cap — OEM Part #S1236AV02000
Clean, steady oil flow keeps an engine alive. The genuine Can-Am Cap restores the factory lubrication system on your DS 250, fitting the original ports and mounts so oil goes exactly where it is needed.
Oil pumps, lines, coolers, filters and dipsticks keep oil flowing, cool and clean. One leaking line or worn pump can starve bearings and destroy an engine quickly. This part is confirmed for 1 Can-Am model from 2010 to 2026. See the full fitment list below.
Cap at a Glance
-
OEM part number: S1236AV02000
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Oil Drain Plug
-
Note: Europe
-
Fits: DS youth and sport ATV models, 2010–2026
-
Condition: New
Can-Am Models and Years This Cap Fits
Genuine Can-Am part #S1236AV02000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am DS youth and sport ATV Fitment
| Model |
Model Years |
| Can-Am DS 250 |
2010–2026 |
Why Choose a Genuine Can-Am OEM Cap?
- Correct fit and sealing with factory fittings
- Maintains designed oil pressure and flow
- Heat- and oil-resistant materials
- Protects expensive engine internals
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM part, part #S1236AV02000
- Original fittings, routing and mounting points
- Made for continuous exposure to hot oil
- Designed for the listed engines
- Pairs with OEM O-rings, gaskets and clamps on the same diagram
Materials and Construction
Can-Am oil-system parts combine aluminum and steel housings, reinforced hose rated for hot oil, and nitrile or fluoroelastomer O-rings and seals for long-term oil and heat exposure.
Common Reasons Riders Replace This Part
- Fixing oil leaks from lines, fittings or coolers
- Restoring oil pressure during a rebuild
- Routine replacement of wear items at service
- Repairing damage from a trail impact
Signs Your Cap Needs Replacing
- Oil drips or residue around lines, fittings or the cooler
- Oil pressure warning or low readings
- Cracked, hardened or swollen hoses
- A damaged dipstick or tube
- Engine running hotter than normal
Installation Tips
- Drain the oil and let the engine cool first.
- Check the Can-Am parts diagram for routing and the O-rings or crush washers you need.
- Lubricate new O-rings with clean oil and torque fittings to spec without overtightening.
- Refill with the correct oil grade and quantity for your model.
- Run the engine, check for leaks, then recheck the oil level.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #S1236AV02000 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Cap with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Cap?
The genuine Can-Am part number is S1236AV02000. Use it to match this part to your factory parts diagram. Note: europe .
Which Can-Am models does part #S1236AV02000 fit?
It fits the DS 250 (2010–2026).
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Which oil should I use?
Use the oil type and quantity in your Can-Am operator's guide. An oil change kit makes sure you have the right filter and washer too.
Do I need new O-rings or crush washers?
Yes. Reused seals are a common cause of leaks.
How often should I change oil and filter?
Follow the intervals in your operator's guide, and change it sooner after dust, mud, water or heavy loads.
Order Your Genuine Can-Am Cap Today
Get your DS 250 back to factory condition. Add the genuine Can-Am Cap (part #S1236AV02000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.