Clinch Nut M6 Hexsert 605636003 by Can-Am

Genuine Can-Am Clinch Nut M6 Hexsert — OEM Part #605636003

Rattles, leaks and doors that will not latch take the fun out of every ride. The genuine Can-Am Clinch Nut M6 Hexsert restores the factory fit of the cab on your Outlander models, so doors close cleanly, seals stay tight and everything lines up the way it did when new.

Cab parts keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece causes rattles, leaks and safety problems. This part is confirmed for 28 Can-Am models from 2019 to 2025. See the full fitment list below.

Clinch Nut M6 Hexsert at a Glance

• OEM part number: 605636003
• Brand: Can-Am by BRP (genuine factory part)
• Part type: Cab Frame
• Fits: Outlander ATV models, 2019–2025
• Condition: New

Can-Am Models and Years This Clinch Nut M6 Hexsert Fits

Genuine Can-Am part #605636003 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Can-Am Outlander ATV Fitment

Why Choose a Genuine Can-Am OEM Clinch Nut M6 Hexsert?

• Factory fit with the cage, doors and roof
• Helps keep dust, water and wind out of the cockpit
• Restores proper door, window and latch operation
• Keeps the structure BRP designed into the cab intact
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM cab part, part #605636003
• Original dimensions and mounting points
• Works with factory seals, hinges, latches and hardware
• Matches the original finish
• Built for off-road vibration and flex

Materials and Construction

Can-Am cab parts use materials matched to the job: coated steel for cage and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels.

Common Reasons Riders Replace This Part

• Repairing a cab after a rollover or impact
• Fixing doors that rattle, sag or will not latch
• Sealing out dust and water on a cab-equipped machine
• Restoring a machine to factory condition

Signs Your Clinch Nut M6 Hexsert Needs Replacing

• Doors or windows that rattle, sag or will not close
• Water or dust getting into the cab
• Bent, cracked or broken parts after an impact
• Torn, flattened or hardened seals
• Corrosion or broken welds on cage parts

Installation Tips

1. Pull up the Can-Am parts diagram for the cab to see how the part fits.
2. Support doors, glass or the roof before loosening hardware.
3. Clean mounting surfaces and check nearby parts for damage.
4. Install with bolts finger-tight, check alignment and door gaps, then tighten to spec.
5. Test doors, latches and windows, and check for leaks with a light water spray.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #605636003 and every part installed with it in the factory Can-Am parts diagrams for your model:

• 2025 Can-Am Outlander MAX 450 6x6 DPS EFI parts diagrams
• 2024 Can-Am Outlander MAX 450 EFI 6x6 DPS parts diagrams
• 2023 Can-Am Outlander MAX 450 6x6 EFI DPS parts diagrams
• 2021 Can-Am Outlander MAX 650 6x6 EFI DPS parts diagrams

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am Side Mirror, Left (#708200963)
• Can-Am Rearview Mirror, Right (#708201092)
• Can-Am Footrest Support (#705210817)
• Can-Am Inner Support, Left (#705207087)
• Can-Am Sheath, Left (#705207420)
• Can-Am Rear Frame (#705206878)

Recommended Accessories and Maintenance Supplies

Pair your Clinch Nut M6 Hexsert with these parts and supplies:

• UTV doors and windows — Half doors, full doors and windows
• UTV windshields — Full, half and folding windshields
• UTV cab enclosures — Weather protection for year-round riding
• UTV side view mirrors — Mirrors for better visibility
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• UTV Door Popping Open Over Bumps? Causes & Fixes
• UTV Enclosed Cab Window Glass Buyer’s Guide
• UTV Windshields: The Ultimate Buyer's Guide
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Clinch Nut M6 Hexsert?

The genuine Can-Am part number is 605636003. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #605636003 fit?

It fits 28 Can-Am Outlander models from 2019 to 2025. The complete list is in the fitment tables above.

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Will this fit a cab with aftermarket doors or windows?

It is designed for the factory Can-Am cab on the listed models. Aftermarket doors and glass may use different mounting points.

Do I need special tools?

Most cab parts install with hand tools. Large panels, doors and glass are much easier with a helper.

Can a bent ROPS or cage part be straightened?

No. Bent or cracked structural parts should be replaced, not straightened. Have the cab inspected before riding again.

Order Your Genuine Can-Am Clinch Nut M6 Hexsert Today

Get your Outlander models back to factory condition. Add the genuine Can-Am Clinch Nut M6 Hexsert (part #605636003) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Georgia Offroad Adventures — Union Point, Georgia: about 150 miles of signed trails
• Windrock Park — Oliver Springs, Tennessee: 300+ miles of mountain trails