Genuine Can-Am Clinch Stud M6x20 — OEM Part #250300027
Your machine earns its keep hauling gear, feed, firewood and tools. The genuine Can-Am Clinch Stud M6x20 restores factory cargo and storage function on your Outlander MAX 6x6 650 EFI XT (International), fitting the original mounts so loads stay secure and latches work the way they should.
Beds, racks, storage bins and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water ruin what you carry. This part is confirmed for 1 Can-Am model from 2022. See the full fitment list below.
Clinch Stud M6x20 at a Glance
-
OEM part number: 250300027
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Cargo & Dump Box Repair
-
Fits: Outlander ATV models, 2022
-
Condition: New
Can-Am Models and Years This Clinch Stud M6x20 Fits
Genuine Can-Am part #250300027 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Outlander ATV Fitment
| Model |
Model Years |
| Can-Am Outlander MAX 6x6 650 EFI XT (International) |
2022 |
Why Choose a Genuine Can-Am OEM Clinch Stud M6x20?
- Factory fit with the original bed, rack, box or frame
- Restores secure latching and load retention
- Keeps stored gear protected from water and dust
- Built for the rated cargo and towing use of the listed models
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM part, part #250300027
- Original mounting points and hardware
- Made for the vibration and loads of work and trail use
- Corrosion-resistant finish or UV-stable plastic, depending on the part
- Works with factory latches, struts and LinQ accessories where equipped
Materials and Construction
Can-Am cargo and storage parts use high-strength steel for load-bearing brackets, racks and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals help keep moisture out.
Common Reasons Riders Replace This Part
- Hauling tools, feed, firewood and equipment
- Towing within the rated limits for your model
- Keeping gear dry in factory storage
- Repairing a bed, tailgate or box after damage
Signs Your Clinch Stud M6x20 Needs Replacing
- Tailgates or lids that will not stay latched
- Cracked bins, boxes or bed panels
- Bent or broken rack and hitch brackets
- Torn or missing seals that let water in
- Dump-bed latches or struts that no longer hold
Installation Tips
- Empty the bed or compartment and support lids or beds before removing parts.
- Use the Can-Am parts diagram to identify fasteners and linkage.
- Remove the worn part and inspect nearby hinges, latches and brackets.
- Install with hardware finger-tight, check alignment, then torque to spec.
- Test latches, hinges and load security before carrying a full load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Clinch Stud M6x20 with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Clinch Stud M6x20?
The genuine Can-Am part number is 250300027. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #250300027 fit?
It fits the Outlander MAX 6x6 650 EFI XT (International) (2022).
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Does this change my cargo or towing capacity?
No. Capacities are set by BRP for your model. This part restores factory function only.
Will it fit aftermarket racks or accessories?
It is designed for the factory Can-Am setup on the listed models. Aftermarket accessories may need their own hardware.
Should I replace the latch hardware too?
If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.
Order Your Genuine Can-Am Clinch Stud M6x20 Today
Get your Outlander MAX 6x6 650 EFI XT (International) back to factory condition. Add the genuine Can-Am Clinch Stud M6x20 (part #250300027) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.