Throttle Cable Clip by Polaris

Polaris UTV/ATV OEM Pedals & Components - Available at buywitchdoctors.com

Product Specifications: Genuine OEM Polaris Throttle Cable Clip, Part # 7081845.

When you are navigating rugged trails, rock crawling, or hauling heavy loads, your physical connection to your machine controls everything. A sticky throttle, a loose brake arm, or a worn-out pedal return spring can ruin a ride or create a major safety hazard. Restoring your cockpit with factory-original parts ensures responsive feedback, crisp actuation, and predictable control under every off-road driving condition.

Investing in authentic Polaris UTV/ATV OEM Pedals & Components ensures your foot controls operate exactly as the factory intended. Engineered to withstand mud, water, dust, and aggressive boot pressure, these replacement parts deliver a precise structural fit. This eliminates excess play or binding in your control linkages, keeping your focus on the terrain ahead.

Premium Features, Heavy-Duty Materials, and Cockpit Benefits

• High-Strength Structural Construction: Crafted from heavy-gauge stamped steel, reinforced aluminum, or automotive-grade composite polymers to prevent bending or breaking under heavy foot pressure.
• Corrosion-Resistant Coatings: Finished with industrial-grade zinc plating or powder coating to resist rust and chemical breakdown from mud, water, and trail wash cleansers.
• Precision Actuation Bushings: Features factory-toleranced pivots and low-friction sleeve bearings that eliminate sloppy side-to-side pedal play and ensure silky-smooth movement.
• Anti-Slip Surface Texturing: Designed with deep, molded-in ridges or aggressive metal treading to provide optimal boot traction in slick, wet, or muddy riding environments.

Real-World Applications and Replacement Indicators

Your off-road vehicle's accelerator and brake assemblies live in a harsh environment, constantly exposed to moisture, grit, and floorboard debris. Over time, mud can infiltrate pivot points, causing premature wear on internal bushings or stretching return springs. If your throttle pedal feels grainy, your brake lever does not return quickly, or you notice excessive wobble, it is time for a refresh.

Using original equipment driver controls is a crucial safety choice during a routine cab overhaul, a post-submersion rebuild, or a custom build cleanup. Genuine factory assemblies preserve calibrated sensor values on drive-by-wire Electronic Throttle Control (ETC) systems. This prevents erratic engine signaling and erratic throttle response common with unvetted, lower-quality aftermarket controls.

Comprehensive Polaris Vehicle Fitment (2015-Current)

This original factory control component is engineered to install seamlessly across a wide variety of specific Polaris powersports configurations, including:

• Polaris RZR Series: 900, XP 1000, Turbo, Pro XP, Pro R, and RS1.
• Polaris Ranger Series: 500, 570, XP 900, XP 1000, and Crew.
• Polaris General Series: 1000 and XP 1000.
• Polaris Sportsman ATV Series: 450, 570, 850, and XP 1000.
• Polaris ACE Series: 500, 570, and 900.
• Polaris Xpedition Series: XP, ADV.

⚠️ IMPORTANT DISCLAIMER: Always check your owner’s manual or the fitment tab on witchdoctors.com to make sure this part fits your specific year, make, and model before ordering.

Other Popular Pedals & Components Parts and Accessories

• Heavy-Duty Anti-Slip Rubber Accelerator and Brake Pedal Pads
• High-Tensile Steel Pedal Return Springs and Pivot Pins
• Throttle Position Sensors and Harness Plugs
• Low-Friction Pivot Bushings and Mechanical Linkage Rod Clevises
• Master Cylinders & Components, Brake Pushrods and Alignment Cleats
• Replacement Foot Brake Levers and Cable Actuators for Utility ATVs
• Billet Aluminum Wide-Foot Cockpit Pedal Extension Plates

Frequently Asked Questions (FAQs)

Why should I choose an OEM accelerator pedal assembly over an aftermarket alternative?
Modern Polaris machines utilize sensitive electronic throttle sensors integrated directly into the pedal unit. Genuine factory components guarantee correct voltage ranges and plug-and-play wiring compatibility. This eliminates the risk of throwing error codes, limp-mode triggers, or erratic engine responses on the trail.

How can I stop my off-road foot controls from squeaking or sticking after a muddy ride?
Sticking is usually caused by fine silt buildup inside the pivot sleeve. Disassemble the pivot, thoroughly clean away old grease and grit, inspect the OEM bushings for scoring, and lubricate with high-quality waterproof grease during reassembly to restore silent, fluid movement.

Are the brake and throttle pedal return springs included with a complete assembly?
Components vary by specific part number. While full assemblies typically come complete with calibrated return springs pre-installed, individual wear parts like replacement pins, separate springs, and bushings can also be ordered individually to rebuild your existing setup.

PRO TIP: Learn more on Does Your UTV or ATV Brake Pedal Sink But No Fluid Loss?

PRO TIP: Learn more about UTV Electronic Accelerator Pedal Symptoms & Fixes.

Secure Absolute Control Over Your Ride at Witchdoctors

Do not let a loose, sloppy brake lever or a sticking throttle ruin your next technical climb or weekend trail ride. Keep your cockpit responsive, safe, and fully functional with rugged factory-certified replacement assemblies from buywitchdoctors.com. We stock a premium selection of genuine off-road driver controls ready to ship directly to your garage. Order your genuine control components today, restore your machine's handling precision, and ride with complete confidence!

Are You Looking to Find Great Places & Adventurous Trails to Ride Your UTV, Side by Side or ATV? Check out these highly recommended places:

1. Look Here in Arizona
2. Look Here in Ohio
3. Look Here in Wyoming
4. Look Here in West Virginia
5. WindRock Park