Black metal clip with two bent prongs and flat hooked ends for secure attachment.
Black metal clip with a folding, angular design and hooked ends.
Black plastic clip with rectangular frame and curved gripping edges.
Black plastic clip with rectangular opening and angled locking tab design.
An Image of the Genuine Can-Am Logo reading 'GENUINE OEM PART' 293730132
#320 in the Diagram
An Image of the Genuine Can-Am Logo reading 'GENUINE OEM PART' 293730132
Black metal clip with two bent prongs and flat hooked ends for secure attachment.
Black metal clip with a folding, angular design and hooked ends.
Black plastic clip with rectangular frame and curved gripping edges.
Black plastic clip with rectangular opening and angled locking tab design.
An Image of the Genuine Can-Am Logo reading 'GENUINE OEM PART' 293730132
#320 in the Diagram
#320 in the Diagram
An Image of the Genuine Can-Am Logo reading 'GENUINE OEM PART' 293730132
Badge

Clip 293730132 by Can-Am

$1.15 USD
Normally Ships in 8-12 Business Days

Inventory:

Loading..
SKU: 293730132
Replaces 517306478
In stock and ready for shipping

SKU: 293730132

Genuine Can-Am Clip — OEM Part #293730132

Small parts hold big things together. The genuine Can-Am Clip is the exact factory fastener specified for your Can-Am ATV or side-by-side, with the correct size, thread, length, grade and finish, so it fits right and holds torque.

OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 347 Can-Am models from 2018 to 2026. See the full fitment list below.

Clip at a Glance

  • OEM part number: 293730132
  • Brand: Can-Am by BRP (genuine factory part)
  • Part type: Cargo & Dump Box Repair
  • Fits: Commander crossover side-by-side, Defender utility side-by-side, Maverick sport side-by-side, Outlander ATV, Renegade sport ATV and Traxter utility side-by-side models, 2018–2026
  • Condition: New

Can-Am Models and Years This Clip Fits

Genuine Can-Am part #293730132 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

This part is shared across 347 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.

Can-Am Commander crossover side-by-side Fitment

Model Family Model Years Trims
Can-Am Commander 700 2022–2026 8
Can-Am Commander 1000R 2022–2026 8

Can-Am Defender utility side-by-side Fitment

Model Family Model Years Trims
Can-Am Defender 6x6 2020, 2022–2023, 2026 4
Can-Am Defender HD5 2020 1
Can-Am Defender HD7 2022–2026 5
Can-Am Defender HD8 2020–2021 3
Can-Am Defender HD9 2022–2026 9
Can-Am Defender HD10 2020–2026 26
Can-Am Defender HD11 2026 11
Can-Am Defender PRO 2020–2026 5

Can-Am Maverick sport side-by-side Fitment

Model Family Model Years Trims
Can-Am Maverick R 2024–2026 12
Can-Am Maverick Sport 2019–2026 18
Can-Am Maverick Trail 2018, 2020, 2022–2023, 2025–2026 12

Can-Am Outlander ATV Fitment

Model Family Model Years Trims
Can-Am Outlander 2x4 2025–2026 1
Can-Am Outlander 4x4 2025–2026 34
Can-Am Outlander 6x6 2023, 2025–2026 17
Can-Am Outlander 500 2024–2026 4
Can-Am Outlander 570 2023 2
Can-Am Outlander 650 2023–2025 13
Can-Am Outlander 700 2024–2026 7
Can-Am Outlander 850 2023–2026 25
Can-Am Outlander 1000R 2023–2026 29
Can-Am Outlander EFI 2023–2024 13
Can-Am Outlander PRO 2024–2026 20

Can-Am Renegade sport ATV Fitment

Model Family Model Years Trims
Can-Am Renegade 4x4 2025–2026 6
Can-Am Renegade 650 2023–2026 6
Can-Am Renegade 1000R 2023–2026 8
Can-Am Renegade EFI 2023 1

Can-Am Traxter utility side-by-side Fitment

Model Family Model Years Trims
Can-Am Traxter 6x6 2022–2026 1
Can-Am Traxter HD7 2023–2026 4
Can-Am Traxter HD8 2020–2021 3
Can-Am Traxter HD9 2022–2026 6
Can-Am Traxter HD10 2020–2025 8
Can-Am Traxter HD11 2026 3
Can-Am Traxter PRO 2021–2026 4
Can-Am Traxter T 2020–2022 10

Why Choose a Genuine Can-Am OEM Clip?

  • Exact factory size, thread pitch and length
  • Correct strength grade for its location
  • Factory corrosion-resistant finish
  • No guessing at metric sizes or grades
  • Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

  • Genuine Can-Am OEM hardware, part #293730132
  • Matches the original thread, length, head style and grade
  • Plated or coated to resist corrosion (where applicable)
  • Used across several Can-Am assemblies, as listed in the fitment table
  • Ideal for replacing lost, stripped or one-time-use fasteners

Materials and Construction

Can-Am fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.

Common Reasons Riders Replace This Part

  • Replacing hardware lost on the trail
  • Replacing stretched, rusted or stripped fasteners
  • Rebuilds that call for new one-time-use hardware
  • Keeping spares for common repairs

Signs Your Clip Needs Replacing

  • Rounded heads or damaged threads
  • Rust that weakens the fastener
  • Missing hardware that leaves a part loose
  • Bolts that will not hold torque
  • Self-locking nuts or one-time bolts that were already reused

Installation Tips

  1. Check the Can-Am parts diagram for the location and quantity you need.
  2. Clean the threads in the mating part, chasing damaged threads with a tap if needed.
  3. Apply thread locker or anti-seize only where the service manual specifies.
  4. Start the fastener by hand to avoid cross-threading.
  5. Tighten to the factory torque spec with a calibrated torque wrench.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #293730132 and every part installed with it in the factory Can-Am parts diagrams for your model:

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

Recommended Accessories and Maintenance Supplies

Pair your Clip with these parts and supplies:

Helpful Guides from the Witchdoctors Blog

Frequently Asked Questions

What is the OEM part number for this Can-Am Clip?

The genuine Can-Am part number is 293730132. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #293730132 fit?

It fits 347 Can-Am Commander, Defender, Maverick, Outlander, Renegade and Traxter models from 2018 to 2026. The complete list is in the fitment tables above.

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Can I use a hardware-store bolt instead?

It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.

Is this sold individually?

This listing is for the part number shown. Check the parts diagram for the quantity at each location.

Should I reuse self-locking nuts?

No. Self-locking and torque-to-yield fasteners are designed for one use.

Order Your Genuine Can-Am Clip Today

Get your Can-Am ATV or side-by-side back to factory condition. Add the genuine Can-Am Clip (part #293730132) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: