Genuine Polaris Front Clutch Intake Seal — OEM Part #5814730
Get crisp engagement and smooth acceleration back with a genuine Polaris Front Clutch Intake Seal. Built for the RZR models, it matches the original PVT clutch specification, so belt alignment, shift points and cooling airflow stay where they should.
The drive and driven clutches, belt, covers and cooling ducts work as one system. Worn or mismatched parts cause belt slip, harsh engagement, overheating and early belt failure. This part is confirmed for 43 Polaris models from 2018 to 2023. See the full fitment list below.
Front Clutch Intake Seal at a Glance
-
OEM part number: 5814730
-
Brand: Polaris (genuine factory part)
-
Part type: CVT Air Components
-
Position: Front
-
Fits: RZR sport side-by-side models, 2018–2023
-
Condition: New
Polaris Models and Years This Front Clutch Intake Seal Fits
Genuine Polaris part #5814730 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 43 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR 64 |
2021 |
1 |
| Polaris RZR 1000 |
2019–2020 |
1 |
| Polaris RZR Turbo |
2019–2021 |
6 |
| Polaris RZR XP |
2018–2023 |
33 |
| Polaris RZR Xp4 |
2019 |
2 |
Why Choose a Genuine Polaris OEM Front Clutch Intake Seal?
- Factory calibration for engagement, shift-out and backshift
- Correct belt alignment and deflection
- Keeps clutch cooling and sealing at factory standard
- Helps your drive belt last longer
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM clutch part, part #5814730
- Built to Polaris's original clutch specifications
- Precision-machined surfaces where applicable
- Designed for the listed Polaris PVT clutch systems
- Works with OEM belts, covers, seals and ducts
Materials and Construction
Polaris clutch parts use precision-machined aluminum sheaves and housings, hardened steel shafts and rollers, wear-resistant bushings, and heat-stable plastic or composite covers and ducts sealed against water and dust.
Common Reasons Riders Replace This Part
- Fixing belt slip, jerky engagement or poor top speed
- Replacing worn sheaves, rollers, springs or bushings
- Repairing covers, seals and ducts after water intrusion
- Routine clutch service and belt replacement
Signs Your Front Clutch Intake Seal Needs Replacing
- Belt slipping, squealing or a burning smell
- Jerky, harsh or delayed engagement
- Loss of top speed or acceleration
- Glazed belt or frequent belt failures
- Water or debris inside the clutch cover
Installation Tips
- Remove the clutch cover and clean out belt dust before taking anything apart.
- Use the correct Polaris clutch tools; clutches are under spring tension.
- Inspect sheave faces, rollers, bushings and the belt while you are in there.
- Assemble to factory torque specs and check belt deflection and alignment.
- Replace cover seals and follow the belt break-in procedure.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #5814730 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Front Clutch Intake Seal with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Front Clutch Intake Seal?
The genuine Polaris part number is 5814730. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5814730 fit?
It fits 43 Polaris RZR models from 2018 to 2023. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Should I replace the belt at the same time?
If the belt is glazed, cracked or worn to minimum width, replace it with the clutch parts.
What causes belts to burn up?
Riding in high range at low speed, heavy loads, water in the clutch housing and worn clutch parts. Use low range for slow, heavy work.
Do I need special tools?
Yes. Most Polaris clutches need specific holding and puller tools to service safely.
Order Your Genuine Polaris Front Clutch Intake Seal Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Front Clutch Intake Seal, OEM part #5814730, from Witchdoctors today and keep your RZR models running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.