Genuine Can-Am Compression Spring — OEM Part #420638129
Get crisp engagement and smooth acceleration back with a genuine Can-Am Compression Spring. Built for the Can-Am ATV or side-by-side, it matches the original CVT specification, so belt alignment, shift points and cooling airflow stay where they should.
The drive and driven clutches, belt, covers and cooling ducts work as one system. Worn or mismatched parts cause belt slip, harsh engagement, overheating and early belt failure. This part is confirmed for 25 Can-Am models from 2026. See the full fitment list below.
Compression Spring at a Glance
-
OEM part number: 420638129
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: CVT/Clutch Components
-
Fits: Defender utility side-by-side, Maverick sport side-by-side and Traxter utility side-by-side models, 2026
-
Condition: New
Can-Am Models and Years This Compression Spring Fits
Genuine Can-Am part #420638129 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Defender utility side-by-side Fitment
| Model |
Model Years |
| Can-Am Defender 6x6 HD10 DPS |
2026 |
| Can-Am Defender 6x6 HD10 LTD Cab |
2026 |
| Can-Am Defender 6x6 HD10 XT |
2026 |
| Can-Am Defender HD9 |
2026 |
| Can-Am Defender HD9 DPS |
2026 |
| Can-Am Defender HD9 DPS Cab |
2026 |
| Can-Am Defender HD9 XT |
2026 |
| Can-Am Defender HD9 XU (International) |
2026 |
| Can-Am Defender HD10 DPS |
2026 |
| Can-Am Defender HD10 DPS Cab |
2026 |
| Can-Am Defender MAX HD9 |
2026 |
| Can-Am Defender MAX HD9 DPS |
2026 |
| Can-Am Defender MAX HD9 XT |
2026 |
| Can-Am Defender MAX HD10 DPS |
2026 |
| Can-Am Defender MAX HD10 DPS Cab |
2026 |
| Can-Am Defender PRO HD10 DPS |
2026 |
| Can-Am Defender PRO HD10 LTD Cab |
2026 |
| Can-Am Defender PRO HD10 XT |
2026 |
Can-Am Maverick sport side-by-side Fitment
| Model |
Model Years |
| Can-Am Maverick Trail EFI DPS |
2026 |
Can-Am Traxter utility side-by-side Fitment
| Model |
Model Years |
| Can-Am Traxter 6x6 HD10 DPS (Europe) |
2026 |
| Can-Am Traxter HD9 (International) |
2026 |
| Can-Am Traxter HD9 DPS (Europe) |
2026 |
| Can-Am Traxter HD9 XU (International) |
2026 |
| Can-Am Traxter MAX HD9 DPS (Europe) |
2026 |
| Can-Am Traxter PRO HD10 XU (International) |
2026 |
Why Choose a Genuine Can-Am OEM Compression Spring?
- Factory calibration for engagement, shift-out and backshift
- Correct belt alignment and deflection
- Keeps CVT cooling and sealing at factory standard
- Helps your drive belt last longer
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM CVT part, part #420638129
- Built to BRP's original clutch specifications
- Precision-machined surfaces where applicable
- Designed for the listed Can-Am CVT systems
- Works with OEM belts, covers, seals and ducts
Materials and Construction
Can-Am CVT parts use precision-machined aluminum sheaves and housings, hardened steel shafts and rollers, wear-resistant bushings, and heat-stable plastic or composite covers and ducts sealed against water and dust.
Common Reasons Riders Replace This Part
- Fixing belt slip, jerky engagement or poor top speed
- Replacing worn sheaves, rollers, springs or bushings
- Repairing covers, seals and ducts after water intrusion
- Routine CVT service and belt replacement
Signs Your Compression Spring Needs Replacing
- Belt slipping, squealing or a burning smell
- Jerky, harsh or delayed engagement
- Loss of top speed or acceleration
- Glazed belt or frequent belt failures
- Water or debris inside the CVT cover
Installation Tips
- Remove the CVT cover and clean out belt dust before taking anything apart.
- Use the correct BRP clutch tools; clutches are under spring tension.
- Inspect sheave faces, rollers, bushings and the belt while you are in there.
- Assemble to factory torque specs and check belt deflection and alignment.
- Replace cover seals and follow the belt break-in procedure.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #420638129 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Compression Spring with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Compression Spring?
The genuine Can-Am part number is 420638129. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #420638129 fit?
It fits 25 Can-Am Defender, Maverick and Traxter models from 2026 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Should I replace the belt at the same time?
If the belt is glazed, cracked or worn to minimum width, replace it with the clutch parts.
What causes CVT belts to burn up?
Riding in high range at low speed, heavy loads, water in the CVT and worn clutch parts. Use low range for slow, heavy work.
Do I need special tools?
Yes. Most Can-Am clutches need specific holding and puller tools to service safely.
Order Your Genuine Can-Am Compression Spring Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Compression Spring, OEM part #420638129, from Witchdoctors today and keep your Can-Am ATV or side-by-side running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.