Genuine Kawasaki Connecting Rod Bushing — OEM Part #92141-1054
When you are inside the engine, there is no room for guesswork. The genuine Kawasaki Connecting Rod Bushing is built to the exact tolerances of the original part in your Mule models, so it fits the mating parts correctly and keeps the engine running the way Kawasaki designed it.
Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 8 Kawasaki models from 2000 to 2013. See the full fitment list below.
Connecting Rod Bushing at a Glance
-
OEM part number: 92141-1054
-
Brand: Kawasaki (genuine factory part)
-
Part type: Connecting Rods & Components
-
Fits: Mule utility side-by-side models, 2000–2013
-
Condition: New
Kawasaki Models and Years This Connecting Rod Bushing Fits
Genuine Kawasaki part #92141-1054 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Mule utility side-by-side Fitment
| Model |
Model Years |
| Kawasaki Mule 2510 Diesel |
2000 and earlier (2000–2002, 2007) |
| Kawasaki Mule 3010 4x4 Diesel |
2003–2007 |
| Kawasaki Mule 3010 Diesel |
2002 and earlier (2002, 2007) |
| Kawasaki Mule 3010 Diesel 4x4 |
2007 and earlier (2007–2008) |
| Kawasaki Mule 3010 Trans 4x4 Diesel |
2008 |
| Kawasaki Mule 4010 4x4 Diesel |
2010–2012 |
| Kawasaki Mule 4010 Diesel 4x4 |
2009, 2013 |
| Kawasaki Mule 4010 Trans 4x4 Diesel |
2009–2013 |
Why Choose a Genuine Kawasaki OEM Connecting Rod Bushing?
- Factory tolerances for correct clearances and fit
- Designed to work with the other OEM parts in the engine
- Helps protect any applicable Kawasaki warranty coverage
- Lowers the risk of a repeat teardown from a poor-fitting part
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM engine part, part #92141-1054
- Machined to Kawasaki's original specifications
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the listed engines
- Pairs with the gaskets and seals on the same parts diagram
Materials and Construction
Kawasaki engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened, heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with elastomer oil seals.
Common Reasons Owners Replace This Part
- Full or partial engine rebuilds
- Repairs after overheating or oil starvation
- Fixing oil leaks at cases, covers and seals
- Restoring compression and power on a high-hour engine
Signs Your Connecting Rod Bushing Needs Replacing
- Oil leaks around covers, cases or seals
- Ticking, knocking or rattling from the engine
- Low compression or noticeable power loss
- Blue or white smoke, or high oil use
- Metal debris in the oil or on the drain plug
Installation Tips
- Follow the Kawasaki service manual for your model; engine work needs exact procedures and torque specs.
- Clean all mating surfaces and replace any gaskets and seals you disturb.
- Measure critical clearances with proper tools before final assembly.
- Lubricate moving parts with clean engine oil or assembly lube as specified.
- Torque fasteners in sequence, refill fluids and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Connecting Rod Bushing with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Connecting Rod Bushing?
The genuine Kawasaki part number is 92141-1054. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #92141-1054 fit?
It fits 8 Kawasaki Mule models from 2000 to 2013. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Should I replace gaskets and seals at the same time?
Yes. Replace any gasket or seal you disturb. They are on the same Kawasaki parts diagram.
Is OEM worth it over aftermarket engine parts?
For internals, OEM parts match the exact clearances the engine was designed around, which helps avoid noise, wear and leaks.
Can I do this repair myself?
Experienced home mechanics can do many engine repairs with the service manual and the right tools. Precision internal work is best left to a qualified technician if you are not set up for it.
Order Your Genuine Kawasaki Connecting Rod Bushing Today
Get your Mule models back to factory condition. Add the genuine Kawasaki Connecting Rod Bushing (part #92141-1054) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.