Crankcase Breather Hose Joint 0JWA-014402 by CFMOTO

Genuine CFMoto Crankcase Breather Hose Joint — OEM Part #0JWA-014402

Rebuild with confidence. The genuine CFMoto Crankcase Breather Hose Joint is the factory engine part for your CFMoto ATV or UTV, machined and finished to CFMoto's original specification for proper clearances, sealing and long service life.

Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 11 CFMoto models from 2018 to 2023. See the full fitment list below.

Crankcase Breather Hose Joint at a Glance

• OEM part number: 0JWA-014402
• Brand: CFMOTO (genuine factory part)
• Part type: Crankcase & Components
• Fits: UForce utility UTV and ZForce sport UTV models, 2018–2023
• Condition: New

CFMoto Models and Years This Crankcase Breather Hose Joint Fits

Genuine CFMoto part #0JWA-014402 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto UForce utility UTV Fitment

CFMoto ZForce sport UTV Fitment

Why Choose a Genuine CFMoto OEM Crankcase Breather Hose Joint?

• Factory tolerances for correct clearances and fit
• Designed to work with the other OEM parts in the engine
• Helps protect your engine and drivetrain warranty, where one applies
• Lowers the risk of repeat teardown from a poor-fitting part
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM engine part, part #0JWA-014402
• Machined to original CFMoto specifications
• Matches factory sealing surfaces and mounting points
• Made for the heat and loads of the listed engines
• Pairs with the gaskets and seals shown on the same parts diagram

Materials and Construction

CFMoto engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened and heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with fluoroelastomer or nitrile oil seals for sealing.

Common Reasons Riders Replace This Part

• Full or partial engine rebuilds
• Repairing damage after overheating or oil starvation
• Fixing oil leaks at cases, covers and seals
• Restoring compression and power on a high-hour engine

Signs Your Crankcase Breather Hose Joint Needs Replacing

• Oil leaks around covers, cases or seals
• Ticking, knocking or rattling from the engine
• Low compression or noticeable loss of power
• Blue or white smoke, or high oil consumption
• Metal debris in the oil or on the drain plug magnet

Installation Tips

1. Follow the CFMoto service manual for your model. Engine work requires exact procedures and torque specs.
2. Clean all mating surfaces thoroughly and replace gaskets and seals you disturb.
3. Measure critical clearances with proper tools before final assembly.
4. Lubricate moving parts with clean engine oil or assembly lube as specified.
5. Torque fasteners in the specified sequence, then refill fluids and check for leaks.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Recommended Accessories and Maintenance Supplies

Pair your Crankcase Breather Hose Joint with these parts and supplies:

• Engine rebuild kits — Rebuild kits for UTV and ATV engines
• Engine gaskets and seals — Gaskets and seals for leak-free rebuilds
• Oil change kits — Complete oil change kits for after your rebuild
• Engine oil — Powersports engine oil for break-in and beyond
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• UTV/ATV Engine Components: A Buyer’s Guide
• ATV/UTV Engine Crankcase Buyer’s Guide
• Stop UTV Gasket Leaks: Expert Installation Guide
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Crankcase Breather Hose Joint?

The genuine CFMoto part number is 0JWA-014402. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #0JWA-014402 fit?

It fits 11 CFMoto UForce and ZForce models from 2018 to 2023. The complete list is in the fitment tables above.

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Should I replace gaskets and seals at the same time?

Yes. Any gasket or seal you disturb should be replaced. They are listed on the same CFMoto parts diagram, so you can order everything at once.

Is OEM worth it over aftermarket engine parts?

For internals, OEM parts are made to the exact clearances the engine was designed around, which helps avoid noise, wear and leaks that a poor fit can cause.

Can I do this repair myself?

Experienced home mechanics can do many engine repairs with the service manual and the right tools. Internal work that needs precise measurement is best left to a qualified technician if you are not set up for it.

Order Your Genuine CFMoto Crankcase Breather Hose Joint Today

Ride with confidence on parts built for your machine. Order the genuine CFMoto Crankcase Breather Hose Joint, OEM part #0JWA-014402, from Witchdoctors today and keep your CFMoto ATV or UTV running the way CFMoto designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all CFMoto OEM parts

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Barnwell Mountain Recreation Area — Gilmer, Texas: about 50 miles of trails
• Haspin Acres — Laurel, Indiana: about 100 miles of trails