Genuine Can-Am Crankshaft — OEM Part #420295031
Rebuild with confidence. The genuine Can-Am Crankshaft is the factory engine part for your Outlander models, machined to BRP's original specification for proper clearances, sealing and long service life.
Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 43 Can-Am models from 2025 to 2026. See the full fitment list below.
Crankshaft at a Glance
-
OEM part number: 420295031
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Crankshaft
-
Fits: Outlander ATV models, 2025–2026
-
Condition: New
Can-Am Models and Years This Crankshaft Fits
Genuine Can-Am part #420295031 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 43 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am Outlander ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Outlander 4x4 |
2025–2026 |
17 |
| Can-Am Outlander 6x6 |
2026 |
4 |
| Can-Am Outlander 850 |
2025–2026 |
7 |
| Can-Am Outlander 1000R |
2025–2026 |
11 |
| Can-Am Outlander PRO |
2025–2026 |
4 |
Why Choose a Genuine Can-Am OEM Crankshaft?
- Factory tolerances for correct clearances and fit
- Designed to work with the other OEM parts in the Rotax engine
- Helps protect any applicable BRP warranty coverage
- Lowers the risk of a repeat teardown from a poor-fitting part
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM engine part, part #420295031
- Machined to BRP's original specifications
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the listed engines
- Pairs with the gaskets and seals on the same parts diagram
Materials and Construction
Rotax engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened, heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with elastomer oil seals.
Common Reasons Riders Replace This Part
- Full or partial engine rebuilds
- Repairs after overheating or oil starvation
- Fixing oil leaks at cases, covers and seals
- Restoring compression and power on a high-hour engine
Signs Your Crankshaft Needs Replacing
- Oil leaks around covers, cases or seals
- Ticking, knocking or rattling from the engine
- Low compression or noticeable power loss
- Blue or white smoke, or high oil use
- Metal debris in the oil or on the drain plug magnet
Installation Tips
- Follow the BRP service manual for your model; engine work needs exact procedures and torque specs.
- Clean all mating surfaces and replace any gaskets and seals you disturb.
- Measure critical clearances with proper tools before final assembly.
- Lubricate moving parts with clean engine oil or assembly lube as specified.
- Torque fasteners in sequence, refill fluids and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #420295031 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Crankshaft with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Crankshaft?
The genuine Can-Am part number is 420295031. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #420295031 fit?
It fits 43 Can-Am Outlander models from 2025 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Should I replace gaskets and seals at the same time?
Yes. Replace any gasket or seal you disturb. They are on the same Can-Am parts diagram.
Is OEM worth it over aftermarket engine parts?
For internals, OEM parts match the exact clearances the Rotax engine was designed around, which helps avoid noise, wear and leaks.
Can I do this repair myself?
Experienced home mechanics can do many engine repairs with the service manual and the right tools. Precision internal work is best left to a qualified technician if you are not set up for it.
Order Your Genuine Can-Am Crankshaft Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Crankshaft, OEM part #420295031, from Witchdoctors today and keep your Outlander models running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.