Genuine Yamaha Crown Nut — OEM Part #90176-05006-00
Small parts hold big things together. The genuine Yamaha Crown Nut is the exact factory fastener specified for your Rhino 450, with the correct size, thread, length, grade and finish, so it fits right and holds torque.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 4 Yamaha models from 2008 to 2009. See the full fitment list below.
Crown Nut at a Glance
-
OEM part number: 90176-05006-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Fuel Tank & Components
-
Fits: Rhino side-by-side models, 2008–2009
-
Condition: New
Yamaha Models and Years This Crown Nut Fits
Genuine Yamaha part #90176-05006-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Rhino side-by-side Fitment
| Model |
Model Years |
| Yamaha Rhino 450 |
2008–2009 |
| Yamaha Rhino 450 Hunter |
2008–2009 |
| Yamaha Rhino 450 SE |
2008 |
| Yamaha Rhino 450 Special Edition |
2008 |
Why Choose a Genuine Yamaha OEM Crown Nut?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at metric sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM hardware, part #90176-05006-00
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Yamaha assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Yamaha fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Crown Nut Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Yamaha parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Crown Nut with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Crown Nut?
The genuine Yamaha part number is 90176-05006-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #90176-05006-00 fit?
It fits the Rhino 450 (2008–2009); Rhino 450 Hunter (2008–2009); Rhino 450 SE (2008); Rhino 450 Special Edition (2008).
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Yamaha Crown Nut Today
Get your Rhino 450 back to factory condition. Add the genuine Yamaha Crown Nut (part #90176-05006-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.