Genuine Kawasaki CV Boot, Doj — OEM Part #49006-0074
A clicking CV joint or torn boot will leave you stranded if you ignore it. The genuine Kawasaki CV Boot, Doj restores factory strength and articulation on your Kawasaki ATV or side-by-side, with the original spline count, length and joint angles.
Axles, CV joints, bearings and hubs carry power to the wheels while the suspension cycles. They take constant shock loads, and wear shows up as clicking, vibration or play. This part is confirmed for 28 Kawasaki models from 2009 to 2027. See the full fitment list below.
CV Boot, Doj at a Glance
-
OEM part number: 49006-0074
-
Brand: Kawasaki (genuine factory part)
-
Part type: CV Boot Kit
-
Note: Doj
-
Fits: Brute Force ATV and Mule utility side-by-side models, 2009–2027
-
Condition: New
Kawasaki Models and Years This CV Boot Fits
Genuine Kawasaki part #49006-0074 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Brute Force ATV Fitment
| Model |
Model Years |
| Kawasaki Brute Force 650 4x4i |
2009–2013 |
| Kawasaki Brute Force 650 4x4i Hardwoods Green HD |
2009–2010 |
| Kawasaki Brute Force 750 |
2024–2025 |
| Kawasaki Brute Force 750 4x4i |
2012–2021 |
| Kawasaki Brute Force 750 4x4i EPS |
2012–2023 |
| Kawasaki Brute Force 750 4x4i EPS Camo |
2015–2023 |
| Kawasaki Brute Force 750 EPS |
2024–2025 |
| Kawasaki Brute Force 750 LE EPS |
2024–2025 |
| Kawasaki Brute Force 750 LE EPS Camo |
2024–2025 |
Kawasaki Mule utility side-by-side Fitment
| Model |
Model Years |
| Kawasaki Mule 600 |
2013 |
| Kawasaki Mule 610 4x4 |
2009–2016 |
| Kawasaki Mule 610 4x4 SE Fleet |
2016 |
| Kawasaki Mule 610 4x4 XC |
2010–2016 |
| Kawasaki Mule 610 4x4 XC Camo |
2015–2016 |
| Kawasaki Mule 610 4x4 XC SE |
2015–2016 |
| Kawasaki Mule SX |
2017–2020, 2023, 2025 |
| Kawasaki Mule SX 4x4 |
2017–2019, 2024–2027 |
| Kawasaki Mule SX 4x4 FE |
2023–2025 |
| Kawasaki Mule SX 4x4 FI |
2019–2023 |
| Kawasaki Mule SX 4x4 SE |
2017–2019 |
| Kawasaki Mule SX 4x4 SE FI |
2020–2021 |
| Kawasaki Mule SX 4x4 XC |
2017–2020, 2024–2027 |
| Kawasaki Mule SX 4x4 XC Camo |
2017–2019 |
| Kawasaki Mule SX 4x4 XC Camo FI |
2019–2021 |
| Kawasaki Mule SX 4x4 XC FI |
2019–2023 |
| Kawasaki Mule SX 4x4 XC LE |
2024–2027 |
| Kawasaki Mule SX 4x4 XC LE FI |
2019–2023 |
| Kawasaki Mule SX 4x4 XC SE |
2017–2019 |
Why Choose a Genuine Kawasaki OEM CV Boot?
- Exact spline count and length for a direct fit
- Factory joint angles for full suspension travel
- Designed for the torque of the listed engines
- Sealed boots and bearings to keep out water and grit
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM axle or hub part, part #49006-0074
- Original spline, length and bearing dimensions
- Heat-treated shafts and joints where applicable
- Boots and seals designed for mud and water
- Fits the listed Kawasaki models without modification
Materials and Construction
Kawasaki axles use heat-treated alloy steel shafts and CV joints packed with high-temperature grease and sealed with durable boots. Hubs and bearings use hardened races and seals made for water crossings.
Common Reasons Owners Replace This Part
- Replacing an axle with a clicking or broken joint
- Fixing torn boots before dirt ruins the joint
- Replacing worn wheel bearings and hubs
- Repairs after a hard impact
Signs Your CV Boot Needs Replacing
- Clicking or popping when turning under power
- Torn boots with grease slung around the wheel
- Vibration at speed or under acceleration
- Play or grinding in the wheel bearing
- A broken axle or wheel that will not drive
Installation Tips
- Raise and support the machine safely and remove the wheel.
- Remove the axle nut; replace it if it is a one-time-use nut.
- Separate the suspension as needed, keeping the boot off sharp edges.
- Install the new part, making sure the splines seat and the circlip engages.
- Torque the axle nut and suspension hardware to spec and test-ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #49006-0074 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your CV Boot with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki CV Boot?
The genuine Kawasaki part number is 49006-0074. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #49006-0074 fit?
It fits 28 Kawasaki Brute Force and Mule models from 2009 to 2027. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need a new axle nut?
Some Kawasaki axle nuts and cotter pins are single-use. Check the parts diagram and replace them if specified.
Can I replace just the CV boot?
If the joint is quiet and the grease is clean, a boot kit can work. If dirt or water got in, replace the axle.
Is OEM as strong as a heavy-duty aftermarket axle?
It is built to Kawasaki's standard for stock machines. With much larger tires or a lift, consider heavy-duty axles.
Order Your Genuine Kawasaki CV Boot Today
Get your Kawasaki ATV or side-by-side back to factory condition. Add the genuine Kawasaki CV Boot, Doj (part #49006-0074) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.