An Image of the Genuine Kawasaki Logo reading 'GENUINE OEM PART' 14073-0760
The Duct, Intake by Kawasaki is a black plastic OEM component with a smooth, curved shape and dual open ends—perfect for Kawasaki UTVs or as an upgrade to your Kawasaki off-road accessories.
The Kawasaki Duct, Intake is a black plastic timing belt cover with a contoured shape and mounting holes, designed to protect the timing belt or pair with OEM intake ducts and Kawasaki UTV parts for enhanced engine protection.
A black curved plastic Duct,Intake by Kawasaki with smooth contours, resembling an OEM intake duct for UTVs, is shown against a white background.
The Duct, Intake by Kawasaki is a black, contoured OEM plastic automotive part with smooth curves and a matte finish, specifically designed for fitting or protection on Kawasaki UTVs.
The Duct, Intake by Kawasaki is a black, curved plastic OEM part with two open ends, molded contours, and a mounting tab on one end for secure airflow direction and fitment in the engine compartment.
Duct,Intake by Kawasaki 14073-0760 OEM Hardware 14073-0760 Off Road Express Peach St
A person in a workshop uses a high-pressure air hose to clean a cvt clutch assembly of a muddy off-road vehicle. The background shows a busy garage environment with another person, tools, and equipment.
An informational infographic titled 'Symptoms of Dirty or Neglected CVT Clutches' with four numbered panels showing gear shift behavior, throttle response, RPM drop under load, and premature belt glazing, alongside a CVT clutch illustration and a car speedometer.
An Image of the Genuine Kawasaki Logo reading 'GENUINE OEM PART' 14073-0760
The Duct, Intake by Kawasaki is a black plastic OEM component with a smooth, curved shape and dual open ends—perfect for Kawasaki UTVs or as an upgrade to your Kawasaki off-road accessories.
The Kawasaki Duct, Intake is a black plastic timing belt cover with a contoured shape and mounting holes, designed to protect the timing belt or pair with OEM intake ducts and Kawasaki UTV parts for enhanced engine protection.
A black curved plastic Duct,Intake by Kawasaki with smooth contours, resembling an OEM intake duct for UTVs, is shown against a white background.
The Duct, Intake by Kawasaki is a black, contoured OEM plastic automotive part with smooth curves and a matte finish, specifically designed for fitting or protection on Kawasaki UTVs.
The Duct, Intake by Kawasaki is a black, curved plastic OEM part with two open ends, molded contours, and a mounting tab on one end for secure airflow direction and fitment in the engine compartment.
Duct,Intake by Kawasaki 14073-0760 OEM Hardware 14073-0760 Off Road Express Peach St
A person in a workshop uses a high-pressure air hose to clean a cvt clutch assembly of a muddy off-road vehicle. The background shows a busy garage environment with another person, tools, and equipment.
An informational infographic titled 'Symptoms of Dirty or Neglected CVT Clutches' with four numbered panels showing gear shift behavior, throttle response, RPM drop under load, and premature belt glazing, alongside a CVT clutch illustration and a car speedometer.
Badge

CVT Air Duct Intake by Kawasaki

$42.20 USD
Normally Ships in 8-12 Business Days

Inventory:

Loading..
SKU: 14073-0760
In stock and ready for shipping

SKU: 14073-0760

Kawasaki UTV/ATV & Side by Side CVT Air Components - Available at buywitchdoctors.com

Product Specifications: Genuine OEM Kawasaki CVT Air Duct Intake, Part # 14073-0760.

Keep your machine running like new with a genuine Kawasaki CVT Air Components paired with premium maintenance parts from buywitchdoctors.com.

When you are out tearing up the trails or working hard on the job site, your continuously variable transmission demands absolute thermal regulation and clean ventilation to perform at its peak. These factory-original cooling ducts and intake seals are designed specifically for your vehicle, ensuring a perfect dustproof seal and superior airflow management that aftermarket options simply cannot guarantee.

Why Choose a Genuine Kawasaki OEM CVT Air Components?

Your Kawasaki transmission housing is a highly integrated, thermal-sensitive environment. Off-brand intake boots, exhaust snorkels, or cooling ducts often use lower-grade rubber compounds or imprecise molding that can warp under intense heat, collapse during high-speed runs, or allow deep mud and wash water to breach the clutch case. By choosing an original equipment manufacturer (OEM) replacement component, you protect your investment, maintain your factory warranty, and ensure constant cool air circulation, maximum belt lifespans, and leak-free case ventilation.

Premium Materials and Engine Protection

  • High-Density Media: Advanced heat-stabilized polymers and heavy-duty reinforced rubber compounds engineered to maintain shape and resist cracking under extreme clutch housing temperatures.
  • Exact Fit Polyurethane Seals: Machined to exact factory casing diameters to prevent loose joint air gaps and water intrusion, a common issue found with generic aftermarket alternatives.
  • Heavy-Duty Construction: Built to endure brutal engine compartment vibration, relentless mud packing, and the rugged environments your vehicle encounters.
  • Maximum Airflow Efficiency: Engineered precisely with factory-profiled internal pathways to streamline cooling air movements directly across primary and secondary sheaves.

Comprehensive Model Fitment (2015-Current)

This genuine OEM part is engineered for a wide range of Kawasaki side-by-side (SxS) and all-terrain vehicles (ATV) built from 2015 to the current model year. Please verify your series matches below:

Utility Task Vehicles (UTVs / Side-by-Sides)

All-Terrain Vehicles (ATVs)

⚠️ IMPORTANT DISCLAIMER: Always check your owner’s manual or the fitment tab on witchdoctors.com to make sure this part fits your specific year, make, and model before ordering.

Other Popular Parts and Accessories

  • CVT Clutch Components: Premium factory weights, rollers, replacement springs, and thrust washers designed to keep your clutch system properly tuned.
  • CVT Clutch Rebuild Kit: Comprehensive tune-up packages including replacement buttons, slider shims, seals, and compression springs for a full clutch tower refresh.
  • CVT Clutch: Premium factory-original primary and secondary clutch assemblies engineered to restore complete power transfer across your entire driveline.
  • Clutch Tool: Specialized secondary clutch compression tools and sheave pullers engineered to safely service internal components without marring metals.

Frequently Asked Questions (FAQs)

Why is maintaining my vehicle's CVT air components so critical to transmission health?
Your CVT drive belt generates immense friction heat during aggressive trail riding or heavy towing. Factory CVT air components supply a continuous stream of cool ambient air to lower internal temperatures; if these ducts are torn, blocked, or leaking, the trapped heat will rapidly glaze or shred your drive belt and warp your clutch faces.

Should I replace the sealing boots when replacing a cracked CVT plastic cooling duct?
Yes, it is highly recommended. The rubber connection boots and band clamps secure the main plastic air paths to the metallic engine and transmission casings. Over time, these rubber pieces dry out, stretch, and develop micro-cracks that allow deep trail water or wash spray to leak inside and cause instant belt slippage.

PRO TIP: Water in Your CVT Housing? How to Drain It and Fix the Leak

PRO TIP: Signs of a Bad UTV/ATV CVT Cover Bearing.

PRO TIP: UTV/ATV CVT Clutch Maintenance Guide.

Upgrade Your Ride's Protection Today

Don't let a torn intake boot, collapsed exhaust duct, or compromised seal bake your expensive drive belt and ruin your clutches on the trail. Keep your belt housing operating with factory-spec thermal defense on every single excursion. Order your genuine Kawasaki UTV/ATV OEM CVT Air Components today from Witchdoctors.com and enjoy fast shipping straight to your door!

Are You Looking to Find Great Places & Adventurous Trails to Ride Your UTV, Side by Side or ATV? Check out these highly recommended places:

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 business days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: