Genuine Victory & Polaris Piston Ring Damper — OEM Part #1500002
Rebuild with confidence. The genuine Victory & Polaris Piston Ring Damper is the factory engine part for your Victory V92, machined to Victory's original specification for correct clearances, sealing and long life.
Engine internals, gaskets and covers work under heat, pressure and vibration. A part that is slightly off can cause oil leaks, noise or serious engine damage. Because Victory, Indian and Polaris are all Polaris Inc. brands, this part number is shared across Victory motorcycles and Polaris off-road vehicles. Every model it fits is listed below.
Piston Ring Damper at a Glance
-
OEM part number: 1500002
-
Brand: Victory & Polaris (genuine Polaris-made OEM part)
-
Part type: Pistons & Components
-
Victory fitment: V92, 1999–2001
-
Polaris off-road fitment: Outlaw, Predator, RZR, Scrambler and Trail Blazer, 2003–2012
-
Condition: New
Models and Years This Piston Ring Damper Fits
Genuine part #1500002 fits the models and years below, across Victory motorcycles and Polaris off-road vehicles. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Victory Motorcycle Fitment
| Model |
Model Years |
| Victory V92 SC |
1999–2001 |
| Victory V92 TC |
2001 |
Polaris Off-Road Vehicle Fitment
| Model |
Model Years |
| Polaris Outlaw 500 |
2006 |
| Polaris Outlaw 525 2x4 Irs |
2010 |
| Polaris Outlaw 525 Irs |
2008–2009, 2011 |
| Polaris Outlaw 525 S |
2008–2010 |
| Polaris Predator |
2003–2004 |
| Polaris Predator 500 |
2005–2006 |
| Polaris RZR 800 S |
2009–2012 |
| Polaris RZR S |
2012 |
| Polaris Scrambler 2x4 (International) |
2008–2009 |
| Polaris Scrambler 500 2x4 (International) |
2007 |
| Polaris Scrambler 500 4x4 |
2003 |
| Polaris Trail Blazer 400 |
2003 |
Yes, a motorcycle part can fit an ATV or side-by-side: Polaris uses many of the same fasteners, seals, filters and electrical parts across its motorcycle and off-road lines, so this part number also appears in the Polaris off-road parts catalog.
Why Choose a Genuine Victory & Polaris OEM Piston Ring Damper?
- Factory tolerances for correct clearances
- Designed to work with the other OEM parts in the Freedom engine
- Correct sealing surfaces and gasket thickness
- Lowers the risk of a repeat teardown
- Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years
Features and Materials
Key Features
- Genuine Victory & Polaris OEM engine part, part #1500002
- Machined to Victory's original specification
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the Freedom V-twin
- Pairs with gaskets and seals on the same parts diagram
Materials and Construction
Victory engine parts use aluminum alloy castings for cases, cylinders and covers, heat-treated steel for cams, shafts and valvetrain parts, and multi-layer or composite gaskets with elastomer oil seals.
Common Reasons Riders Replace This Part
- Top-end or full engine rebuilds
- Fixing oil leaks at covers, cases and seals
- Repairing cam chain tensioner or valvetrain wear
- Restoring compression and power on a high-mileage engine
Signs Your Piston Ring Damper Needs Replacing
- Oil leaks at covers, base gaskets or seals
- Ticking, knocking or cam chain noise
- Low compression or power loss
- Blue smoke or high oil use
- Metal debris on the drain plug magnet
Installation Tips
- Follow the Victory service manual; engine work needs exact procedures and torque specs.
- Clean all mating surfaces and replace every gasket and seal you disturb.
- Measure critical clearances before final assembly.
- Lubricate parts with clean engine oil or assembly lube.
- Torque in sequence, refill oil and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #1500002 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Piston Ring Damper with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory & Polaris Piston Ring Damper?
The genuine part number is 1500002. Use it to match this part to your factory parts diagram.
Which Victory motorcycles does part #1500002 fit?
It fits the Victory V92 SC (1999–2001); Victory V92 TC (2001).
Does part #1500002 fit Indian motorcycles?
Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.
Does it fit Polaris ATVs or side-by-sides?
Yes. The same part number is used on 12 Polaris off-road models, including the Outlaw, Predator, RZR, Scrambler and Trail Blazer. See the Polaris table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory and Polaris models, not an aftermarket copy.
Should I replace gaskets at the same time?
Yes. Replace any gasket or seal you disturb; they are on the same parts diagram.
Are Victory engine parts still available?
Many are, but supply is shrinking since production ended in 2017. Stock up on wear items.
Can I do this myself?
Experienced home mechanics can with the service manual and the right tools. Internal work needing precise measurement is best done by a qualified technician.
Order Your Genuine Victory & Polaris Piston Ring Damper Today
Victory parts get harder to find every year. Order the genuine Victory & Polaris Piston Ring Damper, OEM part #1500002, from Witchdoctors today and keep your Victory V92 running the way it was built.
Where to Ride Your Victory
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.