Genuine Can-Am Dart Mount — OEM Part #710005529
A rattling heat shield or leaking exhaust can cook nearby parts and wiring. The genuine Can-Am Dart Mount restores the factory exhaust and heat protection on your Can-Am ATV or side-by-side, with the right fit, clearances and mounting.
The exhaust routes hot gas away from the engine, controls noise and keeps heat away from panels, wiring and riders. Loose shields and leaks lead to melted parts and failed inspections. This part is confirmed for 60 Can-Am models from 2017 to 2020. See the full fitment list below.
Dart Mount at a Glance
-
OEM part number: 710005529
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: OEM Exhaust Mounts & Components
-
Fits: Defender utility side-by-side, Maverick sport side-by-side and Traxter utility side-by-side models, 2017–2020
-
Condition: New
Can-Am Models and Years This Dart Mount Fits
Genuine Can-Am part #710005529 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 60 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am Defender utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Defender |
2017 |
1 |
| Can-Am Defender 6x6 |
2020 |
1 |
| Can-Am Defender HD8 |
2017–2020 |
2 |
| Can-Am Defender HD10 |
2017–2018, 2020 |
14 |
| Can-Am Defender Lone |
2018 |
1 |
| Can-Am Defender PRO |
2020 |
1 |
| Can-Am Defender T |
2017 |
1 |
Can-Am Maverick sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Maverick Sport |
2019–2020 |
14 |
| Can-Am Maverick Trail |
2018–2020 |
10 |
Can-Am Traxter utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Traxter |
2017 |
1 |
| Can-Am Traxter HD8 |
2017–2020 |
3 |
| Can-Am Traxter HD10 |
2018, 2020 |
7 |
| Can-Am Traxter T |
2017–2018, 2020 |
4 |
Why Choose a Genuine Can-Am OEM Dart Mount?
- Factory fit and clearances
- Keeps noise at factory levels for trail rules
- Protects plastics, wiring and riders from heat
- Uses the original hangers, gaskets and hardware
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM exhaust part, part #710005529
- Original mounting points and pipe routing
- High-temperature materials and finishes
- Designed for the listed Can-Am engines
- Pairs with OEM gaskets and hardware on the same diagram
Materials and Construction
Can-Am exhaust parts are heat-resistant steel or stainless steel. Heat shields use stamped steel, aluminum or insulated layers, and gaskets use graphite or multi-layer steel to seal at high temperature.
Common Reasons Riders Replace This Part
- Fixing rattles from loose or broken heat shields
- Repairing exhaust leaks at joints
- Replacing a damaged muffler or spark arrestor
- Meeting trail noise and spark arrestor rules
Signs Your Dart Mount Needs Replacing
- Rattling or buzzing from the exhaust area
- Ticking or puffing from a leak
- Melted or discolored plastics near the exhaust
- Soot around joints and gaskets
- A damaged, clogged or missing spark arrestor
Installation Tips
- Let the exhaust cool completely.
- Spray hardware with penetrating oil, since exhaust bolts often seize.
- Replace gaskets at every joint you open.
- Fit with hardware loose, align for clearance, then tighten to spec.
- Run the engine and check for leaks, rattles and clearance to plastics.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #710005529 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Dart Mount with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Dart Mount?
The genuine Can-Am part number is 710005529. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #710005529 fit?
It fits 60 Can-Am Defender, Maverick and Traxter models from 2017 to 2020. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Do I need a spark arrestor?
Most public trails require a working, approved spark arrestor. Check local rules.
Will an aftermarket exhaust add horsepower?
Sometimes a little, but often mostly noise, and it may need a tune. OEM keeps factory noise and performance.
Should I reuse exhaust gaskets?
No. They crush when tightened and rarely reseal.
Order Your Genuine Can-Am Dart Mount Today
Get your Can-Am ATV or side-by-side back to factory condition. Add the genuine Can-Am Dart Mount (part #710005529) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.