Genuine Yamaha Dash Cover Bracket — OEM Part #5UG-F139T-10-00
Electrical gremlins are some of the hardest problems to chase. The genuine Yamaha Dash Cover Bracket plugs into your Rhino models with the original connectors, pin-outs and specifications, so it works with the factory wiring and electronics the first time.
Harnesses, switches, relays, sensors, charging parts, ignition parts and control units all work together. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 33 Yamaha models from 2005 to 2013. See the full fitment list below.
Dash Cover Bracket at a Glance
-
OEM part number: 5UG-F139T-10-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Dashboards & Components
-
Fits: Rhino side-by-side models, 2005–2013
-
Condition: New
Yamaha Models and Years This Dash Cover Bracket Fits
Genuine Yamaha part #5UG-F139T-10-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Rhino side-by-side Fitment
| Model |
Model Years |
| Yamaha Rhino |
2005 |
| Yamaha Rhino 450 |
2007–2009 |
| Yamaha Rhino 450 Hunter |
2007–2009 |
| Yamaha Rhino 450 SE |
2007–2008 |
| Yamaha Rhino 450 Special Edition |
2007–2008 |
| Yamaha Rhino 660 |
2007 |
| Yamaha Rhino 660 4WD |
2006 |
| Yamaha Rhino 660 4WD Explorer Edition |
2006–2007 |
| Yamaha Rhino 660 4WD Exploring |
2006–2007 |
| Yamaha Rhino 660 4WD Hunter |
2006 |
| Yamaha Rhino 660 4WD Hunter Exploring Edition |
2006 |
| Yamaha Rhino 660 4WD SE |
2006–2007 |
| Yamaha Rhino 660 4WD Special |
2006–2007 |
| Yamaha Rhino 660 4WD Sport |
2007 |
| Yamaha Rhino 660 Ducks Unlimited |
2007 |
| Yamaha Rhino 660 Hunter |
2007 |
| Yamaha Rhino 660F |
2005–2007 |
| Yamaha Rhino 700 |
2011–2013 |
| Yamaha Rhino 700 1RBD |
2013 |
| Yamaha Rhino 700 FI |
2008–2009 |
| Yamaha Rhino 700 FI Ducks |
2008–2009 |
| Yamaha Rhino 700 FI Ducks Unlimited |
2008–2009 |
| Yamaha Rhino 700 FI Hunter |
2008–2009 |
| Yamaha Rhino 700 FI SE |
2008–2009 |
| Yamaha Rhino 700 FI Special |
2008–2009 |
| Yamaha Rhino 700 FI Sport |
2008–2009 |
| Yamaha Rhino 700 Hunter |
2011–2012 |
| Yamaha Rhino 700 Hunter 1RBJ |
2013 |
| Yamaha Rhino 700 Hunter Edition |
2012 |
| Yamaha Rhino 700 Sport |
2011–2012 |
| Yamaha Rhino 700 Sport 1R |
2013 |
| Yamaha Rhino 700FI |
2009 |
| Yamaha Rhino Hunter |
2005 |
Why Choose a Genuine Yamaha OEM Dash Cover Bracket?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU or CDI, meter and diagnostics
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM electrical part, part #5UG-F139T-10-00
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Yamaha models
- No splicing or adapters needed
Materials and Construction
Yamaha electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring meter functions and warning lights
Signs Your Dash Cover Bracket Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging
- Melted, corroded or broken connectors and wires
- Switches, meters or accessories that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Yamaha parts and wiring diagrams to confirm routing and connectors.
- Clean corroded connectors with contact cleaner.
- Make sure every connector clicks fully and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Dash Cover Bracket with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Dash Cover Bracket?
The genuine Yamaha part number is 5UG-F139T-10-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #5UG-F139T-10-00 fit?
It fits 33 Yamaha Rhino models from 2005 to 2013. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in parts do not. Some control units may need dealer setup. Check your service manual or contact us before ordering.
How do I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.
Should I use dielectric grease?
A light coat on connector seals helps keep water out. Follow your service manual.
Order Your Genuine Yamaha Dash Cover Bracket Today
Get your Rhino models back to factory condition. Add the genuine Yamaha Dash Cover Bracket (part #5UG-F139T-10-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.