Genuine Polaris Dash Wiring Harness — OEM Part #2412363
Restore reliable power and electronics with a genuine Polaris Dash Wiring Harness. Built for the Ranger 800, it matches the factory connectors and electrical values, with no splicing or adapters.
Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 2 Polaris models from 2013 to 2014. See the full fitment list below.
Dash Wiring Harness at a Glance
-
OEM part number: 2412363
-
Brand: Polaris (genuine factory part)
-
Part type: OEM Harness
-
Fits: Ranger utility side-by-side models, 2013–2014
-
Condition: New
Polaris Models and Years This Dash Wiring Harness Fits
Genuine Polaris part #2412363 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 800 EFI Midsize |
2013–2014 |
| Polaris Ranger 800 Midsize |
2013 |
Why Choose a Genuine Polaris OEM Dash Wiring Harness?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU, gauges and diagnostics
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM electrical part, part #2412363
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Polaris models
- No splicing or adapters needed
Materials and Construction
Polaris electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring gauge functions and warning lights
Signs Your Dash Wiring Harness Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging
- Melted, corroded or broken connectors and wires
- Switches, gauges or accessories that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Polaris parts and wiring diagrams to confirm routing and connectors.
- Clean corroded connectors with contact cleaner.
- Make sure every connector clicks fully and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Dash Wiring Harness with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Dash Wiring Harness?
The genuine Polaris part number is 2412363. Use it to match this part to your factory parts diagram.
Which Polaris models does part #2412363 fit?
It fits the Ranger 800 EFI Midsize (2013–2014); Ranger 800 Midsize (2013).
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in parts do not. Some modules and keys need dealer programming. Check your service manual or contact us before ordering.
How do I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.
Should I use dielectric grease?
A light coat on connector seals helps keep water out. Follow your service manual.
Order Your Genuine Polaris Dash Wiring Harness Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Dash Wiring Harness, OEM part #2412363, from Witchdoctors today and keep your Ranger 800 running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.