Decal Kit 7000-190020-10000 by CFMOTO

Genuine CFMoto Decal Kit — OEM Part #7000-190020-10000

Restore the showroom look of your ZForce 800 EX with the genuine CFMoto Decal Kit. This is the same factory-printed decal CFMoto applies on the assembly line, so the colors, cut lines and logos line up with the rest of your machine instead of standing out as an obvious replacement.

Decals and labels do more than look good. Model graphics identify your machine, and warning labels carry safety and loading information that CFMoto requires to be legible. This part is confirmed for 1 CFMoto model from 2018. See the full fitment list below.

Decal Kit at a Glance

• OEM part number: 7000-190020-10000
• Brand: CFMOTO (genuine factory part)
• Part type: OEM Decal
• Fits: ZForce sport UTV models, 2018
• Condition: New

CFMoto Models and Years This Decal Kit Fits

Genuine CFMoto part #7000-190020-10000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto ZForce sport UTV Fitment

Why Choose a Genuine CFMoto OEM Decal Kit?

• Exact factory color match, so the new decal blends with the graphics around it
• Pre-cut to the original outline, with no trimming or guesswork
• Correct placement for the specific body panel it was designed for
• Keeps your machine looking original, which helps at resale or trade-in
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM graphic, part #7000-190020-10000
• Printed with UV-resistant inks made for outdoor powersports use
• Pressure-sensitive adhesive backing for a clean, bubble-free bond
• Sized and shaped for the original panel location
• Ready to apply. No paint, primer or special tools needed

Materials and Construction

CFMoto factory decals use a durable vinyl film with a protective top layer that resists sun fade, fuel splash, pressure washing and trail abrasion. The adhesive is designed to hold on curved plastic body panels through heat cycles and vibration.

Common Reasons Riders Replace This Part

• Replacing graphics scratched or peeled by brush, branches and roost
• Refreshing a machine before selling or trading it in
• Finishing a body panel replacement so it matches the rest of the machine
• Replacing illegible safety or warning labels to keep your machine compliant

Signs Your Decal Kit Needs Replacing

• Edges lifting or peeling away from the panel
• Colors faded or chalky from sun exposure
• Tears, scuffs or missing sections from trail damage
• A new body panel installed without its matching graphic
• Warning or loading information you can no longer read

Installation Tips

1. Remove the old decal by warming it gently with a heat gun or hair dryer and peeling slowly.
2. Clean off leftover adhesive with an adhesive remover, then wipe the area with isopropyl alcohol.
3. Let the surface dry completely and work in shade at room temperature (roughly 60–90°F).
4. Peel back a small section of backing, align one edge, and press outward with a squeegee or soft cloth.
5. Work across the decal to push out air, then press the edges firmly and avoid pressure washing for 24–48 hours.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Recommended Accessories and Maintenance Supplies

Pair your Decal Kit with these parts and supplies:

• UTV and ATV graphics kits — Full graphics kits to refresh or customize your whole machine
• UTV and ATV reflectors — Replacement reflectors to keep your machine visible
• Off-road cleaning kits — Cleaning kits that are safe on vinyl graphics
• UTV waxes and protectants — Protectants that help graphics resist UV fade
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• UTV Decals & Graphics: Ultimate Side-by-Side Buyer's Guide
• A Guide to UTV/ATV Warning Labels & Safety Decals
• How to Clean UTV & ATV Vinyl Seats to Prevent Cracking
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Decal Kit?

The genuine CFMoto part number is 7000-190020-10000. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #7000-190020-10000 fit?

It fits the ZForce 800 EX (2018).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Will this decal match the color of my other graphics?

Yes. It is the genuine CFMoto OEM graphic for the listed models and years, printed to the original factory color. Graphics on older machines may have faded slightly, so a brand-new decal can look brighter at first.

Do I need to remove the body panel to install it?

Usually not. Most decals can be applied with the panel on the machine. Removing the panel can make it easier to clean and align on tight curves.

Can I apply it in cold weather?

For the best bond, apply it at room temperature. Adhesive does not grab well on cold plastic, so warm the panel first if you are working in a cold garage.

About Availability of Part #7000-190020-10000

CFMoto has marked this part as no longer available. It may have been replaced by a newer part number. Contact our customer service team with your VIN and we will help you find the current replacement, or read more about parts that are no longer available.

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Brimstone Recreation — Huntsville, Tennessee: about 300 miles of trails
• Hollister Hills SVRA — Hollister, California: a state vehicular recreation area with designated ATV and 4x4 areas