Drive Axle 705402496 by Can-Am

Genuine Can-Am Drive Axle — OEM Part #705402496

A clicking CV joint or torn boot will leave you stranded if you ignore it. The genuine Can-Am Drive Axle restores factory strength and articulation on your Defender HD10 or Traxter HD10, with the original spline count, length and joint angles.

Axles, CV joints, bearings and hubs carry power to the wheels while the suspension cycles. They take constant shock loads, and wear shows up as clicking, vibration or play. This part is confirmed for 12 Can-Am models from 2020 to 2021. See the full fitment list below.

Drive Axle at a Glance

• OEM part number: 705402496
• Brand: Can-Am by BRP (genuine factory part)
• Part type: Axle Shaft
• Fits: Defender utility side-by-side and Traxter utility side-by-side models, 2020–2021
• Condition: New

Can-Am Models and Years This Drive Axle Fits

Genuine Can-Am part #705402496 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Can-Am Defender utility side-by-side Fitment

Can-Am Traxter utility side-by-side Fitment

Why Choose a Genuine Can-Am OEM Drive Axle?

• Exact spline count and length for a direct fit
• Factory joint angles for full suspension travel
• Designed for the torque of the listed engines
• Sealed boots and bearings to keep out water and grit
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM axle or hub part, part #705402496
• Original spline, length and bearing dimensions
• Heat-treated shafts and joints where applicable
• Boots and seals designed for mud and water
• Fits the listed Can-Am models without modification

Materials and Construction

Can-Am axles use heat-treated alloy steel shafts and CV joints packed with high-temperature grease and sealed with durable boots. Hubs and bearings use hardened races and seals made for water crossings.

Common Reasons Riders Replace This Part

• Replacing an axle with a clicking or broken joint
• Fixing torn boots before dirt ruins the joint
• Replacing worn wheel bearings and hubs
• Repairs after a hard impact

Signs Your Drive Axle Needs Replacing

• Clicking or popping when turning under power
• Torn boots with grease slung around the wheel
• Vibration at speed or under acceleration
• Play or grinding in the wheel bearing
• A broken axle or wheel that will not drive

Installation Tips

1. Raise and support the machine safely and remove the wheel.
2. Remove the axle nut; replace it if it is a one-time-use nut.
3. Separate the suspension as needed, keeping the boot off sharp edges.
4. Install the new part, making sure the splines seat and the circlip engages.
5. Torque the axle nut and suspension hardware to spec and test-ride.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #705402496 and every part installed with it in the factory Can-Am parts diagrams for your model:

• 2021 Can-Am Defender HD10 DPS XT parts diagrams
• 2021 Can-Am Defender HD10 X mr parts diagrams
• 2020 Can-Am Defender HD10 parts diagrams
• 2020 Can-Am Defender HD10 Cab parts diagrams

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am CV Joint Guard, Left (#706202134)
• Can-Am CV Joint, Left (#705402408)
• Can-Am Plunging CV Joint (#715900444)
• Can-Am CV Joint (#705502831)
• Can-Am Exterior CV Joint (#715900621)
• Can-Am Hex Flange Screw M10x20 S.GRIP (#250001046)

Recommended Accessories and Maintenance Supplies

Pair your Drive Axle with these parts and supplies:

• UTV axles — OEM-style and heavy-duty axles
• CV boots — Boot kits and clamps
• Wheel bearings — Bearings and seal kits
• Bearing grease and lubricants — Grease for bearings and joints
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• How Do I Know if My UTV or ATV CV Joint Is Ruined?
• UTV CV Boots Buyer’s Guide: OEM vs. Aftermarket Options
• Learn about UTV/ATV axle and cv boot guards | Guard Your Axles
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Drive Axle?

The genuine Can-Am part number is 705402496. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #705402496 fit?

It fits 12 Can-Am Defender and Traxter models from 2020 to 2021. The complete list is in the fitment tables above.

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Do I need a new axle nut?

Many Can-Am axle nuts are single-use. Check the parts diagram and replace the nut and cotter pin if specified.

Can I replace just the CV boot?

If the joint is quiet and the grease is clean, a boot kit can work. If dirt or water got in, replace the axle.

Is OEM as strong as a heavy-duty aftermarket axle?

It is built to BRP's standard for stock machines. With much larger tires or a lift, consider heavy-duty axles.

Order Your Genuine Can-Am Drive Axle Today

Get your Defender HD10 or Traxter HD10 back to factory condition. Add the genuine Can-Am Drive Axle (part #705402496) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Iron Range OHV State Recreation Area — Gilbert, Minnesota: 36 miles of riding on 1,200 acres
• Mine Made Paradise Adventure Park — Leburn, Kentucky: 100+ miles of ATV and UTV trails (UTVs up to 70 in. wide)