Genuine Victory & Indian Drive Pulley Spacer — OEM Part #7661185
Missed shifts, clutch slip and belt noise all trace back to the driveline. The genuine Victory & Indian Drive Pulley Spacer restores the factory clutch, transmission or final drive on your Victory or Indian motorcycle, built to Victory's original specification.
The clutch, primary, six-speed transmission, shifter, pulleys and drive belt carry every bit of engine torque to the rear wheel. Because Victory, Indian and Polaris are all Polaris Inc. brands, this part number is shared across Victory motorcycles and Indian motorcycles. Every model it fits is listed below.
Drive Pulley Spacer at a Glance
-
OEM part number: 7661185
-
Brand: Victory & Indian (genuine Polaris-made OEM part)
-
Part type: Drive Pulley
-
Victory fitment: Boardwalk, Cross Country, Cross Roads, Gunner, Hammer, Hardball, Highball, Jackpot, Judge, Kingpin, Magnum, Octane, Vegas, Vision and X1, 2005–2017
-
Indian fitment: FTR, 2019–2024
-
Condition: New
Models and Years This Drive Pulley Spacer Fits
Genuine part #7661185 fits the models and years below, across Victory motorcycles and Indian motorcycles. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Victory Motorcycle Fitment
| Model |
Model Years |
| Victory Boardwalk |
2013–2015 |
| Victory Cross Country |
2010–2017 |
| Victory Cross Country Tour |
2013–2017 |
| Victory Cross Roads |
2010–2014 |
| Victory Cross Roads Classic |
2013–2014 |
| Victory Gunner |
2015–2017 |
| Victory Hammer |
2005–2017 |
| Victory Hardball |
2013 |
| Victory Highball |
2013–2017 |
| Victory Jackpot |
2006–2016 |
| Victory Judge |
2013–2017 |
| Victory Kingpin |
2008–2011 |
| Victory Magnum |
2015–2017 |
| Victory Octane |
2017 |
| Victory Vegas |
2008–2017 |
| Victory Vision |
2008–2009, 2011–2017 |
| Victory Vision Tour |
2009–2010 |
| Victory X1 |
2015–2017 |
Indian Motorcycle Fitment
| Model |
Model Years |
| Indian FTR |
2023–2024 |
| Indian FTR 1200 |
2019–2020, 2022 |
| Indian FTR 1200 Carbon |
2022 |
| Indian FTR 1200 Carbon LE |
2020 |
| Indian FTR 1200 Rally |
2020, 2022 |
| Indian FTR 1200 Rally LE |
2019 |
| Indian FTR 1200 S |
2019 |
| Indian FTR R Carbon |
2023–2024 |
| Indian FTR Rally |
2023–2024 |
| Indian FTR Sport |
2023–2024 |
| Indian FTR X 1 R Carbon |
2024 |
| Indian FTR X 100% R Carbon |
2024 |
| Indian FTR X Rsd Super Hooligan |
2024 |
Why Choose a Genuine Victory & Indian OEM Drive Pulley Spacer?
- Exact gear, spline and bearing fit
- Restores smooth clutch engagement and shifting
- Correct belt alignment and tension
- Built for full Freedom V-twin torque
- Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years
Features and Materials
Key Features
- Genuine Victory & Indian OEM driveline part, part #7661185
- Machined to Victory's original specification
- Hardened surfaces where applicable
- Designed for the listed Victory & Indian models
- Works with factory belts, pulleys and clutch parts
Materials and Construction
Victory driveline parts use heat-treated steel gears, shafts and shift forks, friction and steel clutch plates, aluminum pulleys and covers, and carbon-fiber-reinforced drive belts.
Common Reasons Riders Replace This Part
- Fixing clutch slip or a heavy clutch pull
- Repairing missed shifts or false neutrals
- Replacing a worn or damaged belt or pulley
- Rebuilding the transmission
Signs Your Drive Pulley Spacer Needs Replacing
- Clutch slipping under load
- Hard shifting or false neutrals
- Clunking or whining from the transmission
- Frayed, cracked or noisy drive belt
- Worn or damaged pulley teeth
Installation Tips
- Follow the Victory service manual for clutch, transmission and belt procedures.
- Replace gaskets and seals you disturb.
- Set belt tension and alignment with the correct gauge.
- Adjust clutch free play to spec.
- Test-ride gently and recheck belt tension after a few miles.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #7661185 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Drive Pulley Spacer with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory & Indian Drive Pulley Spacer?
The genuine part number is 7661185. Use it to match this part to your factory parts diagram.
Which Victory motorcycles does part #7661185 fit?
It fits 18 Victory models (Boardwalk, Cross Country, Cross Roads, Gunner, Hammer, Hardball, Highball, Jackpot, Judge, Kingpin, Magnum, Octane, Vegas, Vision and X1) from 2005 to 2017. See the Victory fitment table above.
Does part #7661185 fit Indian motorcycles?
Yes. It fits 13 Indian models (FTR) from 2019 to 2024. See the Indian fitment table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory, Indian models, not an aftermarket copy.
How do I check belt tension?
Use a belt tension gauge at the spec in your manual. Our blog covers belt checks step by step.
Should I replace both pulleys with a new belt?
Inspect the teeth. Worn or damaged pulleys will chew up a new belt.
What causes false neutrals?
Worn shift forks or detent parts, or a misadjusted shifter linkage.
Order Your Genuine Victory & Indian Drive Pulley Spacer Today
Keep your Victory or Indian motorcycle on the road. Add the genuine Victory & Indian Drive Pulley Spacer (part #7661185) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Victory or Indian
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.