Genuine Kawasaki Driven Clutch Assembly — OEM Part #49094-1075
Get smooth engagement and steady acceleration back with a genuine Kawasaki Driven Clutch Assembly. Built for the Mule 2510 or Mule 3010, it matches the original CVT specification, so belt alignment, shift points and cooling airflow stay where they should.
The drive and driven pulleys, belt, covers and cooling ducts work as one system. Worn or mismatched parts cause belt slip, harsh engagement, overheating and early belt failure. This part is confirmed for 2 Kawasaki models from 2000 to 2007. See the full fitment list below.
Driven Clutch Assembly at a Glance
-
OEM part number: 49094-1075
-
Brand: Kawasaki (genuine factory part)
-
Part type: CVT Clutch
-
Fits: Mule utility side-by-side models, 2000–2007
-
Condition: New
Kawasaki Models and Years This Driven Clutch Assembly Fits
Genuine Kawasaki part #49094-1075 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Mule utility side-by-side Fitment
| Model |
Model Years |
| Kawasaki Mule 2510 Diesel |
2000 and earlier (2000–2002, 2007) |
| Kawasaki Mule 3010 Diesel |
2002 and earlier (2002, 2007) |
Why Choose a Genuine Kawasaki OEM Driven Clutch Assembly?
- Factory calibration for engagement and shift-out
- Correct belt alignment and deflection
- Keeps CVT cooling and sealing at factory standard
- Helps your drive belt last longer
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM CVT or clutch part, part #49094-1075
- Built to Kawasaki's original clutch specifications
- Precision-machined surfaces where applicable
- Designed for the listed Kawasaki drivetrains
- Works with OEM belts, covers, seals and ducts
Materials and Construction
Kawasaki CVT and clutch parts use precision-machined aluminum sheaves and housings, hardened steel shafts, weights and rollers, wear-resistant bushings and friction materials, and heat-stable covers and ducts sealed against water and dust.
Common Reasons Owners Replace This Part
- Fixing belt slip, jerky engagement or poor top speed
- Replacing worn sheaves, weights, springs or bushings
- Repairing covers, seals and ducts after water intrusion
- Routine CVT service and belt replacement
Signs Your Driven Clutch Assembly Needs Replacing
- Belt slipping, squealing or a burning smell
- Jerky, harsh or delayed engagement
- Loss of top speed or pulling power
- Glazed belt or frequent belt failures
- Water or debris inside the CVT cover
Installation Tips
- Remove the CVT cover and clean out belt dust before taking anything apart.
- Use the correct Kawasaki clutch tools; pulleys are under spring tension.
- Inspect sheave faces, weights, bushings and the belt while you are in there.
- Assemble to factory torque specs and check belt deflection and alignment.
- Replace cover seals and follow the belt break-in procedure.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Driven Clutch Assembly with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Driven Clutch Assembly?
The genuine Kawasaki part number is 49094-1075. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #49094-1075 fit?
It fits the Mule 2510 Diesel (2000 and earlier (2000–2002, 2007)); Mule 3010 Diesel (2002 and earlier (2002, 2007)).
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Should I replace the belt at the same time?
If the belt is glazed, cracked or worn to minimum width, replace it with the clutch parts.
What causes CVT belts to burn up?
Riding in high range at low speed, heavy loads, water in the CVT and worn clutch parts. Use low range for slow, heavy work.
Do I need special tools?
Yes. Most Kawasaki CVT pulleys need specific holding and puller tools to service safely.
Order Your Genuine Kawasaki Driven Clutch Assembly Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Driven Clutch Assembly, OEM part #49094-1075, from Witchdoctors today and keep your Mule 2510 or Mule 3010 running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.