Driver Seat Belt 5KWV-341100-1001 by CFMOTO

Genuine CFMoto Driver Seat Belt — OEM Part #5KWV-341100-1001

Ride safer and more comfortably with a genuine CFMoto Driver Seat Belt. Made for the UForce 800 XL, this OEM part matches the factory mounts and works with the original seat, belt and cab systems.

Seats, belts, nets and their mounts keep riders in position over rough ground. Worn or damaged parts reduce comfort and, more importantly, protection. This part is confirmed for 1 CFMoto model from 2025. See the full fitment list below.

Driver Seat Belt at a Glance

• OEM part number: 5KWV-341100-1001
• Brand: CFMOTO (genuine factory part)
• Part type: Safety Belt
• Fits: UForce utility UTV models, 2025
• Condition: New

CFMoto Models and Years This Driver Seat Belt Fits

Genuine CFMoto part #5KWV-341100-1001 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto UForce utility UTV Fitment

Why Choose a Genuine CFMoto OEM Driver Seat Belt?

• Factory fit with the original seat base, frame and mounts
• Restores CFMoto's designed rider support and restraint
• Weather-resistant materials made for outdoor use
• Keeps safety systems working as intended
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM part, part #5KWV-341100-1001
• Matches the original mounting points and hardware
• UV- and water-resistant covers and webbing (where applicable)
• Designed for the listed CFMoto models
• Works with factory seat latches, belts and interlocks

Materials and Construction

CFMoto seating parts use UV-resistant marine-grade vinyl, closed-cell foam that resists water absorption, and steel or plastic seat bases. Safety belts use high-strength polyester webbing with steel latch hardware built to factory specification.

Common Reasons Riders Replace This Part

• Replacing torn or worn seat covers and cushions
• Replacing frayed, cut or sun-damaged belts
• Fixing loose or broken seat mounts and latches
• Restoring a machine for resale or a new owner

Signs Your Driver Seat Belt Needs Replacing

• Torn vinyl or waterlogged foam
• Seat belt webbing that is frayed, cut or faded
• Belts that do not retract or latch properly
• Seats that rock, slide or will not lock in place
• Broken nets, buckles or mounts

Installation Tips

1. Use the CFMoto parts diagram to identify mounting hardware and any seat-belt interlock wiring.
2. Remove the old part, noting how belts and wiring are routed.
3. Install the new part with the correct factory hardware.
4. Torque seat-belt anchor bolts to spec; never substitute hardware on restraint anchors.
5. Test latches, retractors and interlocks before riding.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

CFMoto Parts Diagrams for This Part

Part #5KWV-341100-1001 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:

• Seat Belt Assembly (Front Seat) diagram — 2025 CFMoto UForce 800 XL

Other OEM Parts in This Assembly

Doing the job right? These genuine CFMoto parts are installed alongside the Driver Seat Belt and are often replaced at the same time:

• CFMoto Seat Belt Retractor (#5KWV-341100-1000-33)
• CFMoto Seat Belt Buckle, Right (#5KWV-341200-1000-35)
• CFMoto Plain Washer (#5KWV-341100-1000-23)
• CFMoto Nut (#5KWV-341100-1000-25)
• CFMoto Lock Washer (#5KWV-341100-1000-26)
• CFMoto Seat Belt Buckle, Left (#5KWV-341100-1000-35)

Recommended Accessories and Maintenance Supplies

Pair your Driver Seat Belt with these parts and supplies:

• UTV seat belts and harnesses — Belts and harnesses for added security
• Replacement seats and covers — Seat covers and replacement seats
• UTV grab handles — Passenger grab handles for rough terrain
• Seat and leather care — Cleaners and protectants for vinyl and leather
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• How to Inspect & Replace UTV Seat Belts | Safety Tech Tip
• How to Clean UTV & ATV Vinyl Seats to Prevent Cracking
• UTV Window Safety Nets and Buckles: A Buyer’s Guide
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Driver Seat Belt?

The genuine CFMoto part number is 5KWV-341100-1001. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #5KWV-341100-1001 fit?

It fits the UForce 800 XL (2025).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Should seat belts be replaced after an accident?

Yes. Belts that have restrained a rider in a crash or rollover can be stretched or damaged internally and should be replaced.

Will this fit an aftermarket seat?

It is designed for the factory CFMoto seat and mounts on the listed models. Aftermarket seats may need their own brackets.

How do I keep vinyl seats from cracking?

Keep them clean and use a UV protectant made for vinyl. Covering the machine when parked outside also helps a lot.

Order Your Genuine CFMoto Driver Seat Belt Today

Ride with confidence on parts built for your machine. Order the genuine CFMoto Driver Seat Belt, OEM part #5KWV-341100-1001, from Witchdoctors today and keep your UForce 800 XL running the way CFMoto designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all CFMoto OEM parts

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Silver Lake State Park ORV Area — Mears, Michigan: 450 acres of open sand dunes on Lake Michigan
• The Mounds ORV Park — Mt. Morris, Michigan: a 370-acre park open year-round