Genuine Polaris Dump / Cargo Box Shock — OEM Part #7041301
Keep your Polaris ATV or side-by-side working with a genuine Polaris Dump / Cargo Box Shock. This OEM part is built to the original specification, so it works with the factory bed, rack or hitch without guesswork.
Beds, racks, storage bins and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water ruin what you carry. This part is confirmed for 3 Polaris models from 2002 to 2008. See the full fitment list below.
Dump / Cargo Box Shock at a Glance
-
OEM part number: 7041301
-
Brand: Polaris (genuine factory part)
-
Part type: Cargo & Dump Box Repair
-
Fits: Ranger utility side-by-side, Series 10/11 ATV and Sportsman ATV models, 2002–2008
-
Condition: New
Polaris Models and Years This Dump / Cargo Box Shock Fits
Genuine Polaris part #7041301 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 700 Commercial EFI 6x6 |
2002 |
Polaris Series 10/11 ATV Fitment
| Model |
Model Years |
| Polaris Series 10 Ptv 6x6 |
2003 |
Polaris Sportsman ATV Fitment
| Model |
Model Years |
| Polaris Sportsman 6x6 |
2003–2008 |
Why Choose a Genuine Polaris OEM Dump / Cargo Box Shock?
- Factory fit with the original bed, rack, box or frame
- Restores secure latching and load retention
- Keeps stored gear protected from water and dust
- Built for the rated cargo and towing use of the listed models
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM part, part #7041301
- Original mounting points and hardware
- Made for the vibration and loads of work and trail use
- Corrosion-resistant finish or UV-stable plastic, depending on the part
- Works with factory latches, struts and Lock & Ride accessories where equipped
Materials and Construction
Polaris cargo and storage parts use high-strength steel for load-bearing brackets, racks and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals help keep moisture out.
Common Reasons Riders Replace This Part
- Hauling tools, feed, firewood and equipment
- Towing within the rated limits for your model
- Keeping gear dry in factory storage
- Repairing a bed, tailgate or box after damage
Signs Your Dump / Cargo Box Shock Needs Replacing
- Tailgates or lids that will not stay latched
- Cracked bins, boxes or bed panels
- Bent or broken rack and hitch brackets
- Torn or missing seals that let water in
- Dump-bed latches or struts that no longer hold
Installation Tips
- Empty the bed or compartment and support lids or beds before removing parts.
- Use the Polaris parts diagram to identify fasteners and linkage.
- Remove the worn part and inspect nearby hinges, latches and brackets.
- Install with hardware finger-tight, check alignment, then torque to spec.
- Test latches, hinges and load security before carrying a full load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Dump / Cargo Box Shock with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Dump / Cargo Box Shock?
The genuine Polaris part number is 7041301. Use it to match this part to your factory parts diagram.
Which Polaris models does part #7041301 fit?
It fits the Ranger 700 Commercial EFI 6x6 (2002); Series 10 Ptv 6x6 (2003); Sportsman 6x6 (2003–2008).
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Does this change my cargo or towing capacity?
No. Capacities are set by the manufacturer for your model. This part restores factory function only.
Will it fit aftermarket racks or accessories?
It is designed for the factory Polaris setup on the listed models. Aftermarket accessories may need their own hardware.
Should I replace the latch hardware too?
If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.
Order Your Genuine Polaris Dump / Cargo Box Shock Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Dump / Cargo Box Shock, OEM part #7041301, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.