Genuine Kawasaki Engine Damper — OEM Part #92161-0423
Rebuild with confidence. The genuine Kawasaki Engine Damper is the factory engine part for your Teryx models, machined to Kawasaki's original specification for proper clearances, sealing and long service life.
Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 21 Kawasaki models from 2008 to 2025. See the full fitment list below.
Engine Damper at a Glance
-
OEM part number: 92161-0423
-
Brand: Kawasaki (genuine factory part)
-
Part type: Engine Mount
-
Fits: Teryx recreation side-by-side models, 2008–2025
-
Condition: New
Kawasaki Models and Years This Engine Damper Fits
Genuine Kawasaki part #92161-0423 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Teryx recreation side-by-side Fitment
| Model |
Model Years |
| Kawasaki Teryx 750 4x4 |
2008 |
| Kawasaki Teryx 750 4x4 LE |
2008 |
| Kawasaki Teryx 750 4x4 NRA Outdoors |
2008–2009 |
| Kawasaki Teryx 750 FI 4x4 |
2010–2013 |
| Kawasaki Teryx 750 FI 4x4 LE |
2009–2013 |
| Kawasaki Teryx 750 FI 4x4 Sport |
2009–2013 |
| Kawasaki Teryx Camo |
2015–2021 |
| Kawasaki Teryx LE |
2015–2021 |
| Kawasaki Teryx S |
2021–2024 |
| Kawasaki Teryx S LE |
2021–2024 |
| Kawasaki Teryx4 750 4x4 |
2012–2013 |
| Kawasaki Teryx4 750 EPS |
2012–2013 |
| Kawasaki Teryx4 750 EPS LE |
2012–2013 |
| Kawasaki Teryx4 Camo |
2015–2023 |
| Kawasaki Teryx4 LE |
2015–2021 |
| Kawasaki Teryx4 LE Camo |
2018–2021 |
| Kawasaki Teryx4 S |
2021 |
| Kawasaki Teryx4 S Camo |
2021, 2024–2025 |
| Kawasaki Teryx4 S LE |
2021–2025 |
| Kawasaki Teryx4 S SE |
2024–2025 |
| Kawasaki Teryx4 S Special Edition |
2023–2025 |
Why Choose a Genuine Kawasaki OEM Engine Damper?
- Factory tolerances for correct clearances and fit
- Designed to work with the other OEM parts in the engine
- Helps protect any applicable Kawasaki warranty coverage
- Lowers the risk of a repeat teardown from a poor-fitting part
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM engine part, part #92161-0423
- Machined to Kawasaki's original specifications
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the listed engines
- Pairs with the gaskets and seals on the same parts diagram
Materials and Construction
Kawasaki engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened, heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with elastomer oil seals.
Common Reasons Owners Replace This Part
- Full or partial engine rebuilds
- Repairs after overheating or oil starvation
- Fixing oil leaks at cases, covers and seals
- Restoring compression and power on a high-hour engine
Signs Your Engine Damper Needs Replacing
- Oil leaks around covers, cases or seals
- Ticking, knocking or rattling from the engine
- Low compression or noticeable power loss
- Blue or white smoke, or high oil use
- Metal debris in the oil or on the drain plug
Installation Tips
- Follow the Kawasaki service manual for your model; engine work needs exact procedures and torque specs.
- Clean all mating surfaces and replace any gaskets and seals you disturb.
- Measure critical clearances with proper tools before final assembly.
- Lubricate moving parts with clean engine oil or assembly lube as specified.
- Torque fasteners in sequence, refill fluids and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #92161-0423 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Engine Damper with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Engine Damper?
The genuine Kawasaki part number is 92161-0423. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #92161-0423 fit?
It fits 21 Kawasaki Teryx models from 2008 to 2025. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Should I replace gaskets and seals at the same time?
Yes. Replace any gasket or seal you disturb. They are on the same Kawasaki parts diagram.
Is OEM worth it over aftermarket engine parts?
For internals, OEM parts match the exact clearances the engine was designed around, which helps avoid noise, wear and leaks.
Can I do this repair myself?
Experienced home mechanics can do many engine repairs with the service manual and the right tools. Precision internal work is best left to a qualified technician if you are not set up for it.
Order Your Genuine Kawasaki Engine Damper Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Engine Damper, OEM part #92161-0423, from Witchdoctors today and keep your Teryx models running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.