Genuine CFMoto Exhaust Pipe Hanger — OEM Part #5UR0-020010-10000
Keep heat and noise where they belong with a genuine CFMoto Exhaust Pipe Hanger. Built for the UForce 600, it bolts to the original mounts so the exhaust stays sealed, quiet and away from plastics, wiring and riders.
The exhaust system routes hot gas away from the engine, controls noise and keeps heat away from body panels, wiring and riders. Loose shields and leaks can lead to melted parts and failed inspections. This part is confirmed for 1 CFMoto model from 2023 to 2025. See the full fitment list below.
Exhaust Pipe Hanger at a Glance
-
OEM part number: 5UR0-020010-10000
-
Brand: CFMOTO (genuine factory part)
-
Part type: OEM Exhaust Mounts & Components
-
Fits: UForce utility UTV models, 2023–2025
-
Condition: New
CFMoto Models and Years This Exhaust Pipe Hanger Fits
Genuine CFMoto part #5UR0-020010-10000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 600 |
2023–2025 |
Why Choose a Genuine CFMoto OEM Exhaust Pipe Hanger?
- Factory fit and clearances around nearby components
- Keeps noise at factory levels for trail and land-use rules
- Protects plastics, wiring and riders from heat
- Uses the original hangers, gaskets and hardware
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM exhaust part, part #5UR0-020010-10000
- Matches original mounting points and pipe routing
- High-temperature materials and finishes
- Designed for the listed CFMoto engines
- Pairs with OEM exhaust gaskets and hardware from the same diagram
Materials and Construction
CFMoto exhaust parts are made from heat-resistant steel or stainless steel. Heat shields and barriers use stamped steel, aluminum or insulated layers, and gaskets use graphite or multi-layer steel designed to seal at high temperature.
Common Reasons Riders Replace This Part
- Fixing rattles from loose or broken heat shields
- Repairing exhaust leaks at gaskets and joints
- Replacing a damaged muffler or spark arrestor
- Meeting trail noise and spark arrestor rules
Signs Your Exhaust Pipe Hanger Needs Replacing
- Rattling or buzzing from the exhaust area
- Ticking or puffing sounds from an exhaust leak
- Melted or discolored plastics near the exhaust
- Black soot marks around joints and gaskets
- A damaged, clogged or missing spark arrestor
Installation Tips
- Let the exhaust cool completely before touching it.
- Spray mounting bolts with penetrating oil, since exhaust hardware often seizes.
- Replace gaskets and seals at every joint you open.
- Fit the part with all hardware loose, align it for proper clearance, then tighten to spec.
- Run the engine, check for leaks and rattles, and check clearance to plastics.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #5UR0-020010-10000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Exhaust Pipe Hanger and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Exhaust Pipe Hanger with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Exhaust Pipe Hanger?
The genuine CFMoto part number is 5UR0-020010-10000. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #5UR0-020010-10000 fit?
It fits the UForce 600 (2023–2025).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Do I need a spark arrestor?
Most public trails and riding areas require a working, approved spark arrestor. Check your local rules.
Will an aftermarket exhaust add horsepower?
Sometimes a little, but often mostly noise, and it may need a tune. A genuine CFMoto part keeps your machine at factory noise and performance levels.
Should I reuse exhaust gaskets?
No. Exhaust gaskets crush when tightened and rarely reseal. Always use new ones.
Order Your Genuine CFMoto Exhaust Pipe Hanger Today
Ride with confidence on parts built for your machine. Order the genuine CFMoto Exhaust Pipe Hanger, OEM part #5UR0-020010-10000, from Witchdoctors today and keep your UForce 600 running the way CFMoto designed it.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.