Flag Pole Kit HH40-801100-1000 by CFMOTO

Genuine CFMoto Flag Pole Kit — OEM Part #HH40-801100-1000

Your machine earns its keep hauling gear, feed, firewood and tools. The genuine CFMoto Flag Pole Kit restores the factory cargo and storage function on your CForce 110 or CForce EV110, fitting the original mounts so loads stay secure and latches work the way they should.

Cargo beds, racks, storage compartments and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water and dust ruin what you are carrying. This part is confirmed for 2 CFMoto models from 2024. See the full fitment list below.

Flag Pole Kit at a Glance

• OEM part number: HH40-801100-1000
• Brand: CFMOTO (genuine factory part)
• Part type: Flag Mount
• Fits: CForce ATV models, 2024
• Condition: New

CFMoto Models and Years This Flag Pole Kit Fits

Genuine CFMoto part #HH40-801100-1000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto CForce ATV Fitment

Why Choose a Genuine CFMoto OEM Flag Pole Kit?

• Factory fit with the original bed, rack, box or frame
• Restores secure latching and load retention
• Keeps stored gear protected from water and dust
• Built for CFMoto's rated cargo and towing use on the listed models
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM part, part #HH40-801100-1000
• Matches original mounting points and hardware
• Made for the vibration and loads of work and trail use
• Corrosion-resistant finish or UV-stable plastic, depending on the part
• Works with factory latches, gas struts and accessories

Materials and Construction

CFMoto cargo and storage parts use high-strength steel for load-bearing brackets, racks and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals and gaskets help keep moisture out of storage compartments.

Common Reasons Riders Replace This Part

• Hauling tools, feed, firewood and equipment
• Towing trailers and implements within CFMoto's rated limits
• Keeping gear dry in factory storage compartments
• Repairing a bed, tailgate or box after damage

Signs Your Flag Pole Kit Needs Replacing

• Tailgates or lids that will not stay latched
• Cracked bins, boxes or bed panels
• Bent or broken rack and hitch brackets
• Torn or missing seals that let water in
• Dump-bed latches or struts that no longer hold

Installation Tips

1. Empty the bed or compartment and support any lids or beds before removing parts.
2. Use the CFMoto parts diagram to identify all fasteners and linkage.
3. Remove the worn part and inspect nearby hinges, latches and brackets.
4. Install the new part with hardware finger-tight, check alignment, then torque to spec.
5. Test latches, hinges and load security before carrying a full load.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

CFMoto Parts Diagrams for This Part

Part #HH40-801100-1000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:

• Flagpole Kit diagram — 2024 CFMoto CForce 110
• Flagpole Kit diagram — 2024 CFMoto CForce EV110

Recommended Accessories and Maintenance Supplies

Pair your Flag Pole Kit with these parts and supplies:

• UTV and ATV cargo racks — Racks and baskets for extra hauling
• UTV storage boxes — Lockable, weather-resistant storage
• Tie-down straps — Ratchet straps and tie-downs for secure loads
• Tow hitches and receivers — Hitch receivers, balls and pins
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Why Your UTV Tailgate Won't Stay Latched | Trail Fix Guide
• UTV & ATV Trailer Hitch Buyer’s Guide: 2-Inch vs 1.25"
• UTV Bed Liner Buyer’s Guide: Spray-In vs. Rubber Mats
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Flag Pole Kit?

The genuine CFMoto part number is HH40-801100-1000. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #HH40-801100-1000 fit?

It fits the CForce 110 (2024); CForce EV110 (2024).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Does this change my machine's cargo or towing capacity?

No. Your rated capacities are set by CFMoto for your model. This part restores factory function; it does not increase the rating.

Will it fit aftermarket racks or bed accessories?

It is designed for the factory CFMoto setup on the listed models. Aftermarket accessories may need their own mounting hardware.

Do I need to replace the latch hardware too?

If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.

Order Your Genuine CFMoto Flag Pole Kit Today

Get your CForce 110 or CForce EV110 back to factory condition. Add the genuine CFMoto Flag Pole Kit (part #HH40-801100-1000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all CFMoto OEM parts

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Paiute ATV Trail — central Utah: 250 miles of marked trail linking to 2,000+ more
• Little Sahara State Park — Waynoka, Oklahoma: about 1,600 acres of sand dunes