Genuine Yamaha Flanged Bolt — OEM Part #95812-10100-00
Small parts hold big things together. The genuine Yamaha Flanged Bolt is the exact factory fastener specified for your Yamaha ATV or side-by-side, with the correct size, thread, length, grade and finish, so it fits right and holds torque.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 37 Yamaha models from 2016 to 2026. See the full fitment list below.
Flanged Bolt at a Glance
-
OEM part number: 95812-10100-00
-
Brand: Yamaha (genuine factory part)
-
Part type: OEM Screw
-
Fits: Viking utility side-by-side and Wolverine recreation side-by-side models, 2016–2026
-
Condition: New
Yamaha Models and Years This Flanged Bolt Fits
Genuine Yamaha part #95812-10100-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Viking utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Viking |
2016–2020 |
| Yamaha Viking EPS |
2016–2026 |
| Yamaha Viking EPS Hunter |
2016–2021 |
| Yamaha Viking EPS Hunting |
2022 |
| Yamaha Viking EPS Ranch |
2018–2026 |
| Yamaha Viking EPS Ranch Edition |
2018–2023 |
| Yamaha Viking EPS SE |
2016–2017, 2019 |
| Yamaha Viking EPS Special E |
2016, 2019 |
| Yamaha Viking Hunter |
2016 |
| Yamaha Viking VI |
2016 |
| Yamaha Viking VI EPS |
2016–2025 |
| Yamaha Viking VI EPS Hunter |
2016–2022 |
| Yamaha Viking VI EPS Huntin |
2022 |
| Yamaha Viking VI EPS Ranch |
2016–2025 |
| Yamaha Viking VI EPS Ranch Edition |
2019–2024 |
| Yamaha Viking VI EPS SE |
2016–2017 |
| Yamaha Viking VI EPS Special |
2017 |
| Yamaha Viking VI EPS Special Edition |
2016 |
| Yamaha Viking VI Hunter |
2016 |
Yamaha Wolverine recreation side-by-side Fitment
| Model |
Model Years |
| Yamaha Wolverine RMAX2 1000 |
2026 |
| Yamaha Wolverine RMAX2 LE |
2025 |
| Yamaha Wolverine RMAX2 R SP |
2025 |
| Yamaha Wolverine RMAX2 R-Spec |
2025 |
| Yamaha Wolverine RMAX2 Spor |
2025 |
| Yamaha Wolverine RMAX2 Sport |
2025 |
| Yamaha Wolverine RMAX2 XT-R |
2025 |
| Yamaha Wolverine RMAX4 1000 |
2025–2026 |
| Yamaha Wolverine RMAX4 LE C |
2025 |
| Yamaha Wolverine RMAX4 R SP |
2025 |
| Yamaha Wolverine RMAX4 R-Spec |
2025 |
| Yamaha Wolverine RMAX4 XT-R |
2025 |
| Yamaha Wolverine X2 850 XT |
2026 |
| Yamaha Wolverine X2 1000 R |
2025–2026 |
| Yamaha Wolverine X2 1000 XT |
2025–2026 |
| Yamaha Wolverine X2 XT-R |
2025 |
| Yamaha Wolverine X4 850 XT |
2026 |
| Yamaha Wolverine X4 XT-R |
2025 |
Why Choose a Genuine Yamaha OEM Flanged Bolt?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at metric sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM hardware, part #95812-10100-00
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Yamaha assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Yamaha fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Flanged Bolt Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Yamaha parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #95812-10100-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Flanged Bolt with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Flanged Bolt?
The genuine Yamaha part number is 95812-10100-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #95812-10100-00 fit?
It fits 37 Yamaha Viking and Wolverine models from 2016 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Yamaha Flanged Bolt Today
Get your Yamaha ATV or side-by-side back to factory condition. Add the genuine Yamaha Flanged Bolt (part #95812-10100-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.