Genuine Polaris Flange — OEM Part #3040066
Restore reliable power and electronics with a genuine Polaris Flange. Built for the Ranger models, it matches the factory connectors and electrical values, with no splicing or adapters.
Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 11 Polaris models from 2015 to 2018. See the full fitment list below.
Flange at a Glance
-
OEM part number: 3040066
-
Brand: Polaris (genuine factory part)
-
Part type: Starter Components
-
Fits: Ranger utility side-by-side models, 2015–2018
-
Condition: New
Polaris Models and Years This Flange Fits
Genuine Polaris part #3040066 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 1000 Diesel |
2015–2018 |
| Polaris Ranger 1000 Diesel Poland (International) |
2018 |
| Polaris Ranger Crew 1000 Diesel |
2015–2018 |
| Polaris Ranger Crew 1000 Diesel MD (International) |
2018 |
| Polaris Ranger Crew 1000 Diesel MD Pol (International) |
2017 |
| Polaris Ranger Crew Diesel |
2015 |
| Polaris Ranger Diesel |
2015–2017 |
| Polaris Ranger Diesel Crew Diesel |
2016 |
| Polaris Ranger Diesel Hst |
2015–2017 |
| Polaris Ranger Diesel Intl |
2015–2016, 2018 |
| Polaris Ranger Hst |
2015–2017 |
Why Choose a Genuine Polaris OEM Flange?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU, gauges and diagnostics
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM electrical part, part #3040066
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Polaris models
- No splicing or adapters needed
Materials and Construction
Polaris electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring gauge functions and warning lights
Signs Your Flange Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging
- Melted, corroded or broken connectors and wires
- Switches, gauges or accessories that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Polaris parts and wiring diagrams to confirm routing and connectors.
- Clean corroded connectors with contact cleaner.
- Make sure every connector clicks fully and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #3040066 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Flange with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Flange?
The genuine Polaris part number is 3040066. Use it to match this part to your factory parts diagram.
Which Polaris models does part #3040066 fit?
It fits 11 Polaris Ranger models from 2015 to 2018. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in parts do not. Some modules and keys need dealer programming. Check your service manual or contact us before ordering.
How do I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.
Should I use dielectric grease?
A light coat on connector seals helps keep water out. Follow your service manual.
Order Your Genuine Polaris Flange Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Flange, OEM part #3040066, from Witchdoctors today and keep your Ranger models running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.