Genuine Kawasaki Flange Nut 8mm — OEM Part #92015-1428
Small parts hold big things together. The genuine Kawasaki Flange Nut 8mm is the exact factory fastener specified for your Kawasaki ATV or side-by-side, with the correct size, thread, length, grade and finish, so it fits right and holds torque.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 47 Kawasaki models from 1990 to 2027. See the full fitment list below.
Flange Nut 8mm at a Glance
-
OEM part number: 92015-1428
-
Brand: Kawasaki (genuine factory part)
-
Part type: OEM Nut
-
Fits: KFX sport and youth ATV and Mule utility side-by-side models, 1990–2027
-
Condition: New
Kawasaki Models and Years This Flange Nut 8mm Fits
Genuine Kawasaki part #92015-1428 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 47 Kawasaki model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Kawasaki KFX sport and youth ATV Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki KFX 700 |
2007–2009 |
1 |
Kawasaki Mule utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki Mule 600 |
2008–2016 |
1 |
| Kawasaki Mule 610 |
2008–2016 |
5 |
| Kawasaki Mule 1000 |
1990–1995, 2007 |
1 |
| Kawasaki Mule 2010 |
1990–1992, 2007 |
1 |
| Kawasaki Mule 2020 |
1990–1992, 2007 |
1 |
| Kawasaki Mule 2030 |
1991, 2007 |
1 |
| Kawasaki Mule 2500 |
1992–2005 |
1 |
| Kawasaki Mule 2510 |
1993–2002, 2007 |
2 |
| Kawasaki Mule 2520 |
1993–2000, 2007 |
1 |
| Kawasaki Mule 3000 |
2001–2008 |
1 |
| Kawasaki Mule 3010 |
2001–2008 |
7 |
| Kawasaki Mule 4000 |
2009–2021, 2025–2027 |
2 |
| Kawasaki Mule 4010 |
2009–2027 |
9 |
| Kawasaki Mule SX |
2017–2027 |
13 |
Why Choose a Genuine Kawasaki OEM Flange Nut 8mm?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at metric sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM hardware, part #92015-1428
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Kawasaki assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Kawasaki fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Owners Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Flange Nut 8mm Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Kawasaki parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #92015-1428 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Flange Nut 8mm with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Flange Nut 8mm?
The genuine Kawasaki part number is 92015-1428. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #92015-1428 fit?
It fits 47 Kawasaki KFX and Mule models from 1990 to 2027. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Kawasaki Flange Nut 8mm Today
Get your Kawasaki ATV or side-by-side back to factory condition. Add the genuine Kawasaki Flange Nut 8mm (part #92015-1428) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.