Genuine Yamaha Flanged Nut — OEM Part #95602-12200-00
Skip the hardware-store guesswork. The genuine Yamaha Flanged Nut matches the thread pitch, length, strength grade and head style of the original, so it fits your Yamaha ATV or side-by-side the first time and holds under vibration.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 33 Yamaha models from 2004 to 2027. See the full fitment list below.
Flanged Nut at a Glance
-
OEM part number: 95602-12200-00
-
Brand: Yamaha (genuine factory part)
-
Part type: OEM Nut
-
Fits: Big Bear utility ATV, Grizzly utility ATV, Pro Hauler utility side-by-side, Raptor sport ATV, Rhino side-by-side, Wolverine recreation side-by-side and YFZ sport ATV models, 2004–2027
-
Condition: New
Yamaha Models and Years This Flanged Nut Fits
Genuine Yamaha part #95602-12200-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Big Bear utility ATV Fitment
| Model |
Model Years |
| Yamaha Big Bear 4WD Hunting |
2012 |
| Yamaha Big Bear 400 4WD |
2008–2012 |
| Yamaha Big Bear 400 4WD Hunting |
2008–2011 |
Yamaha Grizzly utility ATV Fitment
| Model |
Model Years |
| Yamaha Grizzly 300 |
2012–2013 |
| Yamaha Grizzly 350 2WD |
2008–2011 |
| Yamaha Grizzly 350 4WD |
2008–2011 |
| Yamaha Grizzly 350 4WD Hunting |
2008–2011 |
| Yamaha Grizzly 350 IRS 4WD |
2008–2011 |
| Yamaha Grizzly 350 IRS 4WD Hunting |
2008–2011 |
| Yamaha Grizzly 400 4WD |
2008 |
| Yamaha Grizzly 400 4WD Hunting |
2008 |
| Yamaha Grizzly 450 4WD |
2008–2010 |
| Yamaha Grizzly 450 4WD Hunting |
2009–2010 |
| Yamaha Grizzly 450 Hunting |
2008 |
| Yamaha Grizzly 450 SE |
2008 |
Yamaha Pro Hauler utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Pro Hauler 700 |
2004–2006 |
| Yamaha Pro Hauler 700 2WD |
2006 |
| Yamaha Pro Hauler 1000 |
2004–2005 |
Yamaha Raptor sport ATV Fitment
| Model |
Model Years |
| Yamaha Raptor 350 |
2008–2013 |
Yamaha Rhino side-by-side Fitment
| Model |
Model Years |
| Yamaha Rhino 700 |
2011–2013 |
| Yamaha Rhino 700 1RBD |
2013 |
| Yamaha Rhino 700 Hunter |
2011–2012 |
| Yamaha Rhino 700 Hunter 1RBJ |
2013 |
| Yamaha Rhino 700 Hunter Edition |
2012 |
| Yamaha Rhino 700 Sport |
2011–2012 |
| Yamaha Rhino 700 Sport 1R |
2013 |
Yamaha Wolverine recreation side-by-side Fitment
| Model |
Model Years |
| Yamaha Wolverine 350 2WD |
2008–2009 |
| Yamaha Wolverine 450 4WD |
2008–2010 |
| Yamaha Wolverine 450 4x4 Sport |
2008 |
| Yamaha Wolverine 450 4x4 Sport SE |
2008 |
Yamaha YFZ sport ATV Fitment
| Model |
Model Years |
| Yamaha YFZ450 |
2012–2013, 2017 |
| Yamaha YFZ450R |
2014–2016, 2018–2027 |
| Yamaha YFZ450R SE |
2014–2027 |
Why Choose a Genuine Yamaha OEM Flanged Nut?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at metric sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM hardware, part #95602-12200-00
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Yamaha assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Yamaha fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Flanged Nut Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Yamaha parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #95602-12200-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Flanged Nut with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Flanged Nut?
The genuine Yamaha part number is 95602-12200-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #95602-12200-00 fit?
It fits 33 Yamaha Big Bear, Grizzly, Pro Hauler, Raptor, Rhino, Wolverine and YFZ models from 2004 to 2027. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Yamaha Flanged Nut Today
Ride with confidence on parts built for your machine. Order the genuine Yamaha Flanged Nut, OEM part #95602-12200-00, from Witchdoctors today and keep your Yamaha ATV or side-by-side running the way Yamaha designed it.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.