Fork Bushing Kit By All Balls 38-6155

Restore Precision Handling: All Balls Fork Bushing Kit For Indian Scout (Part #38-6155) – Available at buywitchdoctors.com.

Is your Indian motorcycle's front end feeling vague, loose, or experiencing excessive stiction? Worn fork bushings are often the culprit. These small, critical components directly influence your bike's handling, damping consistency, and overall safety. Therefore, when servicing your front suspension, always replace your bushings.

Witchdoctors.com brings you the definitive solution: the All Balls Fork Bushing Kit (Part Number 38-6155). This comprehensive kit provides all the internal bushings needed to restore the precise, smooth action your forks had when they were brand new. Consequently, you will notice an immediate improvement in cornering stability and ride quality.

Engineered Excellence: Features of the 38-6155 Kit

The All Balls Fork Bushing Kit is manufactured to exceed OEM specifications, ensuring a perfect fit and long-lasting durability.

Complete Fork Kit: This package includes all the necessary internal precision sliding surfaces for two complete fork legs.

Kit Includes:

• 2- Slider Bushings
• 2- Fork Leg Bushings
• 2- O -Rings
• 2- Fork Seal Snap Rings
• 2- Copper Washers

Copper Coated Guide Bushings: The critical guide bushings feature a copper-coated outer surface. This coating drastically improves the wear resistance and overall lifespan of the bushing.

Teflon-Coated Slider Bushings: The inner slider bushings are treated with high-quality PTFE (Teflon). This application reduces friction (stiction) to an absolute minimum. This guarantees incredibly smooth and responsive fork travel.

Precision OEM Replacement: Each component within the kit is measured and machined to exact factory dimensions. This ensures optimal clearance and prevents unwanted play or binding within the fork leg assembly.

High-Strength Steel Construction: The backing material for both the guide and slider bushings utilizes robust steel, providing the necessary structural integrity for high-impact suspension cycling.

Performance Benefits: Smooth Ride, Improved Control

Choosing the All Balls Fork Bushing Kit is an investment in your Indian motorcycle’s performance and your safety.

• Eliminates Internal Play: By replacing worn bushings, you immediately tighten up the tolerance between the inner and outer fork tubes. This action removes the "sloppy" feel and wandering sensation often felt during hard braking.
• Reduces Stiction: The superior Teflon coating dramatically lowers friction. This translates into smoother, more compliant suspension action over small bumps and road imperfections. This is crucial for rider comfort and tire traction.
• Extends Seal Life: New, properly fitting bushings keep the fork tubes perfectly aligned. This minimizes side-load pressure on the fork seals. It drastically extends the life of your seals and preventing premature fluid leaks.
• Restored Damping Consistency: With proper alignment, the internal damping system can function as designed. This gives you consistent, predictable feel and rebound throughout the entire stroke.
• Cost-Effective Fork Rebuild: This comprehensive motorcycle fork repair kit provides OEM-level quality at a fraction of the cost. This helps make necessary suspension service accessible.

When to Use the All Balls 38-6155 Kit

Suspension failure often gives clear warning signs. If you experience any of the following, it is time to install the All Balls Fork Bushing Kit, 38-6155:

• Excessive Fork Seal Leaks: Often caused by worn bushings allowing the tube to wobble, which tears up the oil seals.
• Visible Play: If you can feel the fork tubes shifting side-to-side when the front brake is applied.
• Harsh or Sticky Ride (Stiction): A feeling that the forks are reluctant to move smoothly through their initial travel.
• Routine Maintenance: It is best practice to replace bushings whenever fork seals are being replaced. The bushings are usually the root cause of many seal failures.

Frequently Asked Questions (FAQs)

Q: Do I need to buy one or two kits? A: You must purchase one All Balls Fork Bushing Kits (Part #38-6155) to completely rebuild the bushings in both the left and right fork legs of your motorcycle.

Q: Are these harder than OEM bushings to install? A: No. Since they are manufactured to strict OEM tolerances, the installation process is identical to factory parts. Specialized fork tools (like a fork seal driver) are recommended for correct installation.

Q: Do these come with new fork seals? A: No, this is specifically a suspension bushing motorcycle kit. We highly recommend purchasing a corresponding All Balls Fork Seal and Wiper Kit simultaneously for a complete, long-lasting fork rebuild.

Don't let worn suspension compromise your ride. Get back the stability and smoothness you deserve with the highest quality replacement components.

Order the All Balls Fork Bushing Kit (38-6155) from Witchdoctors.com today and lock in your front end performance!

Need help choosing the correct fork oil? Check out this tech tip.

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 business days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.