Genuine Victory Fork Guard Left Side Chrome Bolt On — OEM Part #5247013-156
Restore planted, confident handling with the genuine Victory Victory Fork Guard Left Side Chrome Bolt On, Polaris part #5247013-156. It is the factory front-end part for the Victory Hammer and Kingpin.
Forks and triple trees handle steering, braking loads and bumps. Worn seals, springs or bearings cause leaks, wobble and poor handling. This part is confirmed for 2 Victory models from 2004 to 2017. See the full fitment list below.
Availability note: Polaris lists this part as discontinued or no longer available. Stock may be limited. See what to do when a part is no longer available or browse hard-to-find Victory parts.
Victory Fork Guard Left Side Chrome Bolt On at a Glance
-
OEM part number: 5247013-156
-
Brand: Victory Motorcycles (genuine Polaris OEM part)
-
Part type: Fork Guard
-
Fits: Victory Cruiser models, 2004–2017
-
Condition: New
Victory Models and Years This Fork Guard Left Side Chrome Bolt On Fits
Genuine Victory part #5247013-156 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or decode your VIN with our Victory VIN decoder before ordering.
Victory Cruiser Fitment
| Model |
Model Years |
| Victory Kingpin |
2004–2012 |
| Victory Hammer |
2005–2017 |
Why Choose a Genuine Victory OEM Fork Guard Left Side Chrome Bolt On?
- Factory spring rate and damping
- Correct steering geometry and trail
- Leak-free seals and smooth action
- Stable handling under braking
- Made to the same specifications as the part installed at the factory, not an aftermarket copy
- Sold by Witchdoctors, a Victory OEM parts source with factory part numbers and diagrams for every listing
Victory stopped building motorcycles after the 2017 model year, and many parts are getting harder to find. Genuine OEM parts keep your bike correct, reliable and easier to sell. Read Victory OEM vs aftermarket parts to see the difference.
Features and Materials
Key Features
- Genuine Polaris/Victory OEM part #5247013-156
- Precision-machined to original dimensions
- Matching chrome or black finish
- Direct replacement for the listed models
Materials and Construction
Victory front suspension parts use hard-chromed steel fork tubes, cast aluminum sliders and triple clamps, steel springs, and oil-resistant seals and bushings.
Common Reasons Riders Replace This Part
- Fork seal and bushing service
- Replacing bent tubes or damaged legs
- Steering bearing replacement
- Repairs after a front-end impact
Signs Your Fork Guard Left Side Chrome Bolt On Needs Replacing
- Oil on the fork tubes or brake
- Clunking under braking
- Front end feels soft or bouncy
- Head shake or notchy steering
Installation Tips
- Support the bike securely with the front wheel off the ground.
- Remove the wheel, fender and brake calipers as needed.
- Install new parts and fill forks with the correct oil and level.
- Torque triple clamp and axle pinch bolts to spec.
- Pump the forks, check alignment and test-ride carefully.
Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.
Victory Parts Diagrams for This Part
Find part #5247013-156 in the factory Victory parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:
Related Victory OEM Parts
Doing the job right? These genuine Victory parts fit the same bikes and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Fork Guard Left Side Chrome Bolt On with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory Fork Guard Left Side Chrome Bolt On?
The genuine Polaris/Victory part number is 5247013-156. Use it to match this part to your factory parts diagram.
Which Victory models does part #5247013-156 fit?
It fits the Kingpin (2004–2012); Hammer (2005–2017).
Is this a genuine Victory part?
Yes. This is a genuine Polaris OEM part for Victory motorcycles, the same part number used at the factory, not an aftermarket copy.
Can I still get parts for my Victory?
Yes. Polaris continues to supply many Victory parts, and Witchdoctors stocks thousands of genuine Victory part numbers. Read where to find Victory parts.
What fork oil does my Victory need?
See our fork oil guide and your service manual for the correct weight and level.
Should I replace seals on both forks?
Yes. Service both legs together for even damping.
Can bent fork tubes be straightened?
Replacement is the safer choice for a road motorcycle.
Order Your Genuine Victory Fork Guard Left Side Chrome Bolt On Today
Ride with confidence on parts made for your bike. Order the genuine Victory Fork Guard Left Side Chrome Bolt On, OEM part #5247013-156, from Witchdoctors today and keep your Victory Hammer and Kingpin running the way Victory designed it.
Where to Ride Your Victory
Your Victory was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.