Front Bumper 9050-230100 by CFMOTO

Genuine CFMoto Front Bumper — OEM Part #9050-230100

Rocks, stumps and ledges take a toll on the underside and front end of any machine. The genuine CFMoto Front Bumper restores factory protection on your CForce 500 or CForce 600, bolting to the original mounting points so it absorbs hits the way CFMoto engineered it to.

Bumpers, skid plates and guards are your machine's first line of defense. They spread out impacts that would otherwise bend frame rails, crack cases or damage suspension parts. This part is confirmed for 5 CFMoto models from 2010 to 2014. See the full fitment list below.

Front Bumper at a Glance

• OEM part number: 9050-230100
• Brand: CFMOTO (genuine factory part)
• Part type: Front Bumper
• Position: Front
• Fits: CForce ATV models, 2010–2014
• Condition: New

CFMoto Models and Years This Front Bumper Fits

Genuine CFMoto part #9050-230100 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto CForce ATV Fitment

Why Choose a Genuine CFMoto OEM Front Bumper?

• Bolts to factory mounting points, with no drilling
• Shields expensive components from rocks, stumps and debris
• Engineered to work with the factory frame and ground clearance
• Cheaper than repairing the parts it protects
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM protection part, part #9050-230100
• Designed around the original frame and suspension geometry
• Corrosion-resistant finish for wet and muddy conditions
• Uses factory hardware locations
• Built to take repeated trail impacts

Materials and Construction

CFMoto protection parts are typically made from steel tube, stamped steel, aluminum or high-density polyethylene (HDPE), depending on location. Each is finished to resist corrosion from mud, water and road salt.

Common Reasons Riders Replace This Part

• Rock crawling and technical trail riding
• Farm and ranch work around brush, posts and stumps
• Replacing a bent bumper or cracked skid plate after an impact
• Restoring factory protection on a used machine

Signs Your Front Bumper Needs Replacing

• Bent, cracked or torn bumpers, plates or guards
• Missing or loose mounting hardware
• Gouges deep enough to weaken the part
• Rust-through on steel components
• Damage to the parts behind the guard

Installation Tips

1. Support the machine safely on stands if you are working underneath.
2. Use the CFMoto parts diagram to identify every bolt and bracket.
3. Remove the damaged part and check the frame mounts for cracks or bends.
4. Install the new part with fresh hardware where needed, applying thread locker if the service manual calls for it.
5. Tighten to the specified torque and recheck after your first ride.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Recommended Accessories and Maintenance Supplies

Pair your Front Bumper with these parts and supplies:

• UTV front and rear bumpers — Front and rear bumpers for added protection
• Rock sliders and skid plates — Underbody and rocker protection
• UTV grille guards — Front-end protection for radiators and lights
• UTV winches — Recovery winches for when the trail gets tough
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• The Ultimate UTV Rock Sliders Buying Guide
• UTV Trailing Arms & Guards Buyer’s Guide
• The Ultimate Maintenance Guide for CFORCE ATVs
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Front Bumper?

The genuine CFMoto part number is 9050-230100. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #9050-230100 fit?

It fits the CForce 500 X5 LWB (2010–2012); CForce 500 X5 SWB (2010–2012); CForce 600 LWB (2014); CForce 600 X6 LWB (2010–2012); CForce 600 X6 SWB (2010–2012).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Is this as strong as an aftermarket bumper or skid plate?

It is built to CFMoto's factory standard for the listed models. Aftermarket armor may be heavier-duty, but the OEM part fits the factory mounts exactly and keeps the original weight and ground clearance.

Can I mount a winch with this part?

Only if the CFMoto parts diagram shows a winch mount for your model. Otherwise, use the dedicated winch mount listed for your machine.

Should I replace the hardware too?

Hardware that has taken a hard hit can stretch or bend. It is good practice to replace damaged bolts and use fresh thread locker.

Order Your Genuine CFMoto Front Bumper Today

Get your CForce 500 or CForce 600 back to factory condition. Add the genuine CFMoto Front Bumper (part #9050-230100) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all CFMoto OEM parts

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Anthracite Outdoor Adventure Area (AOAA) — Shamokin, Pennsylvania: about 200 miles of trails in former coal country
• The Mounds ORV Park — Mt. Morris, Michigan: a 370-acre park open year-round