Genuine Yamaha Front Bumper — OEM Part #1XD-F845N-10-00
Rocks, stumps and ledges take a toll on the underside and front end of any machine. The genuine Yamaha Front Bumper restores factory protection on your Viking or Viking VI, bolting to the original mounting points so it takes hits the way Yamaha engineered it to.
Bumpers, skid plates and guards are the first line of defense. They spread out impacts that would otherwise bend frame rails, crack cases or damage suspension parts. This part is confirmed for 11 Yamaha models from 2020 to 2026. See the full fitment list below.
Front Bumper at a Glance
-
OEM part number: 1XD-F845N-10-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Front Bumper
-
Position: Front
-
Fits: Viking utility side-by-side models, 2020–2026
-
Condition: New
Yamaha Models and Years This Front Bumper Fits
Genuine Yamaha part #1XD-F845N-10-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Viking utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Viking |
2020 |
| Yamaha Viking EPS |
2020–2026 |
| Yamaha Viking EPS Hunter |
2020–2021 |
| Yamaha Viking EPS Hunting |
2022 |
| Yamaha Viking EPS Ranch |
2020–2026 |
| Yamaha Viking EPS Ranch Edition |
2020–2023 |
| Yamaha Viking VI EPS |
2020–2025 |
| Yamaha Viking VI EPS Hunter |
2020–2022 |
| Yamaha Viking VI EPS Huntin |
2022 |
| Yamaha Viking VI EPS Ranch |
2020–2025 |
| Yamaha Viking VI EPS Ranch Edition |
2020–2024 |
Why Choose a Genuine Yamaha OEM Front Bumper?
- Bolts to factory mounting points, with no drilling
- Shields expensive parts from rocks, stumps and debris
- Works with the factory frame and ground clearance
- Costs far less than repairing the parts it protects
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM protection part, part #1XD-F845N-10-00
- Designed around the original frame and suspension geometry
- Corrosion-resistant finish for wet and muddy conditions
- Uses factory hardware locations
- Built for repeated trail and work impacts
Materials and Construction
Yamaha protection parts are typically steel tube, stamped steel, aluminum or high-density plastic, depending on location, finished to resist corrosion from mud, water and road salt.
Common Reasons Riders Replace This Part
- Trail riding over rocks, logs and ruts
- Farm, ranch and hunting use around brush, posts and stumps
- Replacing a bent bumper or cracked skid plate
- Restoring factory protection on a used machine
Signs Your Front Bumper Needs Replacing
- Bent, cracked or torn bumpers, plates or guards
- Missing or loose mounting hardware
- Deep gouges that weaken the part
- Rust-through on steel parts
- Damage to the components behind the guard
Installation Tips
- Support the machine safely on stands if working underneath.
- Use the Yamaha parts diagram to identify every bolt and bracket.
- Remove the damaged part and check the frame mounts for cracks or bends.
- Install with fresh hardware where needed and thread locker if the manual calls for it.
- Torque to spec and recheck after your first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #1XD-F845N-10-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Front Bumper with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Front Bumper?
The genuine Yamaha part number is 1XD-F845N-10-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #1XD-F845N-10-00 fit?
It fits 11 Yamaha Viking models from 2020 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Is this as strong as aftermarket armor?
It is built to Yamaha's factory standard for the listed models. Aftermarket armor may be heavier, but the OEM part fits the factory mounts exactly and keeps the original weight and clearance.
Can I mount a winch with this part?
Only if the Yamaha parts diagram shows a winch mount for your model. Otherwise use the dedicated winch mount.
Should I replace the hardware too?
Hardware that has taken a hard hit can stretch or bend. Replace damaged bolts and use fresh thread locker.
Order Your Genuine Yamaha Front Bumper Today
Get your Viking or Viking VI back to factory condition. Add the genuine Yamaha Front Bumper (part #1XD-F845N-10-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.