Genuine CFMoto Front Cargo Rack, Plastic Powder — OEM Part #9AWA-143000-2BP00
Keep your CForce 800 or CForce 1000 working hard with a genuine CFMoto Front Cargo Rack, Plastic Powder. This OEM part is built to CFMoto's original specification, so it works with the factory bed, rack or hitch and carries its rated load without guesswork.
Cargo beds, racks, storage compartments and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water and dust ruin what you are carrying. This part is confirmed for 3 CFMoto models from 2019 to 2024. See the full fitment list below.
Front Cargo Rack, Plastic Powder at a Glance
-
OEM part number: 9AWA-143000-2BP00
-
Brand: CFMOTO (genuine factory part)
-
Part type: Cargo Rack
-
Position: Front
-
Fits: CForce ATV models, 2019–2024
-
Condition: New
CFMoto Models and Years This Front Cargo Rack, Plastic Powder Fits
Genuine CFMoto part #9AWA-143000-2BP00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 800 XC |
2019–2024 |
| CFMoto CForce 1000 |
2023–2024 |
| CFMoto CForce 1000 Overland |
2021–2022 |
Why Choose a Genuine CFMoto OEM Front Cargo Rack, Plastic Powder?
- Factory fit with the original bed, rack, box or frame
- Restores secure latching and load retention
- Keeps stored gear protected from water and dust
- Built for CFMoto's rated cargo and towing use on the listed models
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM part, part #9AWA-143000-2BP00
- Matches original mounting points and hardware
- Made for the vibration and loads of work and trail use
- Corrosion-resistant finish or UV-stable plastic, depending on the part
- Works with factory latches, gas struts and accessories
Materials and Construction
CFMoto cargo and storage parts use high-strength steel for load-bearing brackets, racks and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals and gaskets help keep moisture out of storage compartments.
Common Reasons Riders Replace This Part
- Hauling tools, feed, firewood and equipment
- Towing trailers and implements within CFMoto's rated limits
- Keeping gear dry in factory storage compartments
- Repairing a bed, tailgate or box after damage
Signs Your Front Cargo Rack, Plastic Powder Needs Replacing
- Tailgates or lids that will not stay latched
- Cracked bins, boxes or bed panels
- Bent or broken rack and hitch brackets
- Torn or missing seals that let water in
- Dump-bed latches or struts that no longer hold
Installation Tips
- Empty the bed or compartment and support any lids or beds before removing parts.
- Use the CFMoto parts diagram to identify all fasteners and linkage.
- Remove the worn part and inspect nearby hinges, latches and brackets.
- Install the new part with hardware finger-tight, check alignment, then torque to spec.
- Test latches, hinges and load security before carrying a full load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #9AWA-143000-2BP00 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Front Cargo Rack, Plastic Powder and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Front Cargo Rack, Plastic Powder with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Front Cargo Rack, Plastic Powder?
The genuine CFMoto part number is 9AWA-143000-2BP00. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #9AWA-143000-2BP00 fit?
It fits the CForce 800 XC (2019–2024); CForce 1000 (2023–2024); CForce 1000 Overland (2021–2022).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Does this change my machine's cargo or towing capacity?
No. Your rated capacities are set by CFMoto for your model. This part restores factory function; it does not increase the rating.
Will it fit aftermarket racks or bed accessories?
It is designed for the factory CFMoto setup on the listed models. Aftermarket accessories may need their own mounting hardware.
Do I need to replace the latch hardware too?
If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.
Order Your Genuine CFMoto Front Cargo Rack, Plastic Powder Today
Ride with confidence on parts built for your machine. Order the genuine CFMoto Front Cargo Rack, Plastic Powder, OEM part #9AWA-143000-2BP00, from Witchdoctors today and keep your CForce 800 or CForce 1000 running the way CFMoto designed it.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.