Genuine CFMoto Front Fender Decal — OEM Part #5BY2-190204
Bring back the factory finish on your ZForce 1000 with a genuine CFMoto Front Fender Decal. Faded, peeled or torn graphics make a machine look older than it is and can hurt resale value, and this OEM decal is printed to match the original color, shape and placement exactly.
Decals and labels do more than look good. Model graphics identify your machine, and warning labels carry safety and loading information that CFMoto requires to be legible. This part is confirmed for 1 CFMoto model from 2019. See the full fitment list below.
Front Fender Decal at a Glance
-
OEM part number: 5BY2-190204
-
Brand: CFMOTO (genuine factory part)
-
Part type: OEM Decal
-
Position: Front
-
Fits: ZForce sport UTV models, 2019
-
Condition: New
CFMoto Models and Years This Front Fender Decal Fits
Genuine CFMoto part #5BY2-190204 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto ZForce sport UTV Fitment
| Model |
Model Years |
| CFMoto ZForce 1000 |
2019 |
Why Choose a Genuine CFMoto OEM Front Fender Decal?
- Exact factory color match, so the new decal blends with the graphics around it
- Pre-cut to the original outline, with no trimming or guesswork
- Correct placement for the specific body panel it was designed for
- Keeps your machine looking original, which helps at resale or trade-in
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM graphic, part #5BY2-190204
- Printed with UV-resistant inks made for outdoor powersports use
- Pressure-sensitive adhesive backing for a clean, bubble-free bond
- Sized and shaped for the original panel location
- Ready to apply. No paint, primer or special tools needed
Materials and Construction
CFMoto factory decals use a durable vinyl film with a protective top layer that resists sun fade, fuel splash, pressure washing and trail abrasion. The adhesive is designed to hold on curved plastic body panels through heat cycles and vibration.
Common Reasons Riders Replace This Part
- Replacing graphics scratched or peeled by brush, branches and roost
- Refreshing a machine before selling or trading it in
- Finishing a body panel replacement so it matches the rest of the machine
- Replacing illegible safety or warning labels to keep your machine compliant
Signs Your Front Fender Decal Needs Replacing
- Edges lifting or peeling away from the panel
- Colors faded or chalky from sun exposure
- Tears, scuffs or missing sections from trail damage
- A new body panel installed without its matching graphic
- Warning or loading information you can no longer read
Installation Tips
- Remove the old decal by warming it gently with a heat gun or hair dryer and peeling slowly.
- Clean off leftover adhesive with an adhesive remover, then wipe the area with isopropyl alcohol.
- Let the surface dry completely and work in shade at room temperature (roughly 60–90°F).
- Peel back a small section of backing, align one edge, and press outward with a squeegee or soft cloth.
- Work across the decal to push out air, then press the edges firmly and avoid pressure washing for 24–48 hours.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #5BY2-190204 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Front Fender Decal and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Front Fender Decal with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Front Fender Decal?
The genuine CFMoto part number is 5BY2-190204. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #5BY2-190204 fit?
It fits the ZForce 1000 (2019).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Will this decal match the color of my other graphics?
Yes. It is the genuine CFMoto OEM graphic for the listed models and years, printed to the original factory color. Graphics on older machines may have faded slightly, so a brand-new decal can look brighter at first.
Do I need to remove the body panel to install it?
Usually not. Most decals can be applied with the panel on the machine. Removing the panel can make it easier to clean and align on tight curves.
Can I apply it in cold weather?
For the best bond, apply it at room temperature. Adhesive does not grab well on cold plastic, so warm the panel first if you are working in a cold garage.
Order Your Genuine CFMoto Front Fender Decal Today
Get your ZForce 1000 back to factory condition. Add the genuine CFMoto Front Fender Decal (part #5BY2-190204) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.