Genuine CFMoto Front Gear Case — OEM Part #Q830-310007-20000
Grinding gears, popping out of range and vibration all point to the drivetrain. The genuine CFMoto Front Gear Case restores factory shifting and power delivery on your CForce models, built to the exact dimensions of the original so it meshes and mounts correctly.
The transmission, shift mechanism, differentials and drive shafts carry the full torque of the engine. Worn or mismatched parts lead to noise, hard shifting and expensive failures. This part is confirmed for 9 CFMoto models from 2016 to 2025. See the full fitment list below.
Front Gear Case at a Glance
-
OEM part number: Q830-310007-20000
-
Brand: CFMOTO (genuine factory part)
-
Part type: Gearcase Assembly
-
Position: Front
-
Fits: CForce ATV models, 2016–2025
-
Condition: New
CFMoto Models and Years This Front Gear Case Fits
Genuine CFMoto part #Q830-310007-20000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 400 |
2016–2019, 2021–2023, 2025 |
| CFMoto CForce 400 S |
2024 |
| CFMoto CForce 500 |
2022–2023 |
| CFMoto CForce 500 S |
2017–2019, 2022, 2024–2025 |
| CFMoto CForce 600 |
2022–2025 |
| CFMoto CForce 600 Touring |
2022–2025 |
| CFMoto CForce 800 XC |
2019–2024 |
| CFMoto CForce 1000 |
2023–2024 |
| CFMoto CForce 1000 Overland |
2021–2022 |
Why Choose a Genuine CFMoto OEM Front Gear Case?
- Exact gear, spline and bearing fit
- Restores smooth, positive shifting and range selection
- Designed for full engine torque and load
- Lowers the risk of repeat failures from a poor-fitting part
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM drivetrain part, part #Q830-310007-20000
- Machined to original CFMoto specifications
- Hardened surfaces for wear resistance where applicable
- Matches factory seals, bearings and mounting
- Designed for the listed CFMoto models
Materials and Construction
CFMoto drivetrain parts use heat-treated alloy steel for gears, shafts, shift forks and splines, sealed bearings, and aluminum or cast housings. Seals and boots are made from oil- and weather-resistant elastomers.
Common Reasons Riders Replace This Part
- Fixing grinding, popping out of gear or hard shifting
- Rebuilding transmissions, gearcases and differentials
- Fixing 4WD engagement problems
- Repairing leaks and vibration from drive shafts and U-joints
Signs Your Front Gear Case Needs Replacing
- Grinding, clunking or whining noises
- Popping out of gear or difficulty selecting range
- Vibration that increases with speed
- Oil leaks at seals, covers or the differential
- 4WD that will not engage or disengage
Installation Tips
- Drain the transmission or differential fluid before disassembly.
- Follow the CFMoto service manual. Many drivetrain jobs need exact shimming, preload and torque specs.
- Replace seals, O-rings and gaskets you disturb.
- Lubricate gears and bearings with the specified fluid during assembly.
- Refill with the correct fluid type and amount, then test-ride and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #Q830-310007-20000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Front Gear Case and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Front Gear Case with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Front Gear Case?
The genuine CFMoto part number is Q830-310007-20000. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #Q830-310007-20000 fit?
It fits 9 CFMoto CForce models from 2016 to 2025. The complete list is in the fitment tables above.
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
What fluid should I use after the repair?
Use the transmission and differential fluids listed in your CFMoto owner's manual. The wrong fluid can cause wear and engagement problems.
Should I replace bearings and seals during a rebuild?
Yes. Bearings and seals are inexpensive compared to labor. Replace them while the unit is apart.
Can a bad drivetrain part damage other components?
Yes. A worn part can send metal debris through the fluid and damage gears and bearings. Repair problems early.
Order Your Genuine CFMoto Front Gear Case Today
Get your CForce models back to factory condition. Add the genuine CFMoto Front Gear Case (part #Q830-310007-20000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.