Genuine CFMoto Front Shock Absorber — OEM Part #5BYV-050500-A101
Worn suspension parts turn a smooth ride into a punishing one and make handling unpredictable. The genuine CFMoto Front Shock Absorber restores the factory geometry, travel and ride quality of your ZForce 950.
A-arms, trailing arms, shocks, springs, sway bars, knuckles and bushings control wheel movement and alignment. Bent or worn parts cause wandering, uneven tire wear and harsh handling. This part is confirmed for 2 CFMoto models from 2022 to 2024. See the full fitment list below.
Front Shock Absorber at a Glance
-
OEM part number: 5BYV-050500-A101
-
Brand: CFMOTO (genuine factory part)
-
Part type: Shock
-
Position: Front
-
Fits: ZForce sport UTV models, 2022–2024
-
Condition: New
CFMoto Models and Years This Front Shock Absorber Fits
Genuine CFMoto part #5BYV-050500-A101 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto ZForce sport UTV Fitment
| Model |
Model Years |
| CFMoto ZForce 950 EX |
2022 |
| CFMoto ZForce 950 HO EX |
2022–2024 |
Why Choose a Genuine CFMoto OEM Front Shock Absorber?
- Factory geometry for straight tracking and predictable handling
- Correct bushing and ball joint fit
- Restores original ride height and travel
- Spreads loads across the frame as CFMoto designed
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM suspension part, part #5BYV-050500-A101
- Matches original mounting points and dimensions
- Corrosion-resistant coating where applicable
- Built for full-travel off-road use
- Works with factory bushings, ball joints and hardware
Materials and Construction
CFMoto suspension parts use high-strength steel or forged components for arms, knuckles and linkages, with corrosion-resistant coatings. Bushings use rubber or polymer compounds, and shocks use steel bodies, chrome-plated shafts and nitrogen- or oil-charged dampers.
Common Reasons Riders Replace This Part
- Replacing bent arms, knuckles or links after an impact
- Fixing clunks, play and wandering from worn bushings
- Restoring ride height and damping
- Rebuilding the suspension on a high-hour machine
Signs Your Front Shock Absorber Needs Replacing
- Clunking or knocking over bumps
- Wandering, pulling or loose handling
- Uneven or rapid tire wear
- Visible bends, cracks or leaking shocks
- Play in ball joints or bushings when you rock the wheel
Installation Tips
- Support the machine safely with the suspension unloaded.
- Check the CFMoto parts diagram for bushings, ball joints and hardware.
- Remove the damaged part and check the frame mounts for damage.
- Install the new part, tightening pivot bolts with the suspension at ride height if the manual specifies.
- Torque all hardware, check the alignment (toe), and recheck after the first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #5BYV-050500-A101 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Front Shock Absorber and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Front Shock Absorber with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Front Shock Absorber?
The genuine CFMoto part number is 5BYV-050500-A101. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #5BYV-050500-A101 fit?
It fits the ZForce 950 EX (2022); ZForce 950 HO EX (2022–2024).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Do I need an alignment after replacing suspension parts?
It is a good idea. Arms, knuckles and tie rods affect toe settings, so check and adjust toe after installation.
Should I replace both sides?
For wear items like bushings and shocks, replacing in pairs keeps handling balanced. Impact damage may only need one side.
Is OEM better than aftermarket suspension?
OEM parts restore the factory ride and geometry. Aftermarket arms may add strength or travel but often change geometry.
Order Your Genuine CFMoto Front Shock Absorber Today
Get your ZForce 950 back to factory condition. Add the genuine CFMoto Front Shock Absorber (part #5BYV-050500-A101) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.