Genuine Can-Am Front Support Plate — OEM Part #705203726
Keep the cab on your Outlander models tight, quiet and weather-resistant with a genuine Can-Am Front Support Plate. It is made to the exact dimensions of the original part, so it mounts to the factory points and works with the surrounding cab structure, doors and glass.
Cab parts keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece causes rattles, leaks and safety problems. This part is confirmed for 34 Can-Am models from 2014 to 2025. See the full fitment list below.
Front Support Plate at a Glance
-
OEM part number: 705203726
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Cab Frame
-
Fits: Outlander ATV models, 2014–2025
-
Condition: New
Can-Am Models and Years This Front Support Plate Fits
Genuine Can-Am part #705203726 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Outlander ATV Fitment
| Model |
Model Years |
| Can-Am Outlander 6x6 (International) |
2014 |
| Can-Am Outlander 6x6 450 EFI (International) |
2019–2020 |
| Can-Am Outlander 6x6 650 EFI (International) |
2018–2020 |
| Can-Am Outlander 6x6 650 EFI Xu+ (International) |
2021–2023 |
| Can-Am Outlander 6x6 EFI (International) |
2018–2020 |
| Can-Am Outlander 6x6 EFI XT (International) |
2022 |
| Can-Am Outlander 6x6 EFI Xu+ (International) |
2021–2023 |
| Can-Am Outlander 6x6 Xu+ 650 EFI (Europe) |
2025 |
| Can-Am Outlander 6x6 Xu+ EFI (Europe) |
2025 |
| Can-Am Outlander 570 EFI (International) |
2022 |
| Can-Am Outlander 650 6x6 EFI |
2015–2018 |
| Can-Am Outlander 650 EFI 6x6 Xu+ (International) |
2024 |
| Can-Am Outlander 1000 6x6 EFI |
2015–2018 |
| Can-Am Outlander EFI 6x6 Xu+ (International) |
2024 |
| Can-Am Outlander MAX 6x6 450 EFI (International) |
2019–2020 |
| Can-Am Outlander MAX 6x6 650 EFI (International) |
2018–2020 |
| Can-Am Outlander MAX 6x6 650 EFI DPS (International) |
2023 |
| Can-Am Outlander MAX 6x6 650 EFI XT (International) |
2022 |
| Can-Am Outlander MAX 6x6 650 EFI Xu+ (International) |
2021–2023 |
| Can-Am Outlander MAX 6x6 DPS 650 EFI (International) |
2025 |
| Can-Am Outlander MAX 6x6 EFI (International) |
2019–2020 |
| Can-Am Outlander MAX 6x6 EFI XT |
2022–2023, 2025 |
| Can-Am Outlander MAX 6x6 EFI Xu+ (International) |
2021–2023 |
| Can-Am Outlander MAX 6x6 Xu+ 650 EFI (Europe) |
2025 |
| Can-Am Outlander MAX 6x6 Xu+ EFI (Europe) |
2025 |
| Can-Am Outlander MAX 450 6x6 EFI |
2019–2020 |
| Can-Am Outlander MAX 650 6x6 DPS EFI |
2025 |
| Can-Am Outlander MAX 650 6x6 EFI |
2019–2020 |
| Can-Am Outlander MAX 650 6x6 EFI DPS |
2022–2023 |
| Can-Am Outlander MAX 650 EFI 6x6 DPS |
2024 |
| Can-Am Outlander MAX 650 EFI 6x6 Xu+ (International) |
2024 |
| Can-Am Outlander MAX 1000 6x6 EFI |
2019–2020 |
| Can-Am Outlander MAX EFI 6x6 XT |
2024 |
| Can-Am Outlander MAX EFI 6x6 Xu+ (International) |
2024 |
Why Choose a Genuine Can-Am OEM Front Support Plate?
- Factory fit with the cage, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Keeps the structure BRP designed into the cab intact
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM cab part, part #705203726
- Original dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish
- Built for off-road vibration and flex
Materials and Construction
Can-Am cab parts use materials matched to the job: coated steel for cage and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels.
Common Reasons Riders Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not latch
- Sealing out dust and water on a cab-equipped machine
- Restoring a machine to factory condition
Signs Your Front Support Plate Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken parts after an impact
- Torn, flattened or hardened seals
- Corrosion or broken welds on cage parts
Installation Tips
- Pull up the Can-Am parts diagram for the cab to see how the part fits.
- Support doors, glass or the roof before loosening hardware.
- Clean mounting surfaces and check nearby parts for damage.
- Install with bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #705203726 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Front Support Plate with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Front Support Plate?
The genuine Can-Am part number is 705203726. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #705203726 fit?
It fits 34 Can-Am Outlander models from 2014 to 2025. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Will this fit a cab with aftermarket doors or windows?
It is designed for the factory Can-Am cab on the listed models. Aftermarket doors and glass may use different mounting points.
Do I need special tools?
Most cab parts install with hand tools. Large panels, doors and glass are much easier with a helper.
Can a bent ROPS or cage part be straightened?
No. Bent or cracked structural parts should be replaced, not straightened. Have the cab inspected before riding again.
Order Your Genuine Can-Am Front Support Plate Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Front Support Plate, OEM part #705203726, from Witchdoctors today and keep your Outlander models running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.