Genuine Yamaha Fuel Pipe Joint — OEM Part #3B4-24380-11-00
Get reliable starts and steady power back with a genuine Yamaha Fuel Pipe Joint. Built for the Yamaha ATV or side-by-side, it matches the original connections and specifications, so fuel delivery stays where the factory calibration expects it.
Tanks, pumps, injectors, carburetors, lines and emissions parts must deliver clean fuel at the right pressure and keep vapors sealed. A small leak or weak part affects starting, power and safety. This part is confirmed for 111 Yamaha models from 2008 to 2027. See the full fitment list below.
Fuel Pipe Joint at a Glance
-
OEM part number: 3B4-24380-11-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Fuel Lines & Mounts
-
Fits: Grizzly utility ATV, Raptor sport ATV, Rhino side-by-side, Wolverine recreation side-by-side and YXZ pure-sport side-by-side models, 2008–2027
-
Condition: New
Yamaha Models and Years This Fuel Pipe Joint Fits
Genuine Yamaha part #3B4-24380-11-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 111 Yamaha model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Yamaha Grizzly utility ATV Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Grizzly |
2008 |
1 |
| Yamaha Grizzly 700 |
2008 |
5 |
Yamaha Raptor sport ATV Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Raptor 700 |
2021–2027 |
2 |
| Yamaha Raptor 700R |
2021–2027 |
3 |
Yamaha Rhino side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Rhino 700 |
2008–2009, 2011–2013 |
14 |
| Yamaha Rhino 700FI |
2009 |
1 |
Yamaha Wolverine recreation side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Wolverine |
2021–2022, 2024 |
8 |
| Yamaha Wolverine RMAX2 |
2021–2026 |
16 |
| Yamaha Wolverine RMAX4 |
2021–2026 |
15 |
| Yamaha Wolverine X2 |
2019–2026 |
18 |
| Yamaha Wolverine X4 |
2018–2026 |
15 |
Yamaha YXZ pure-sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha YXZ1000R |
2019–2025 |
13 |
Why Choose a Genuine Yamaha OEM Fuel Pipe Joint?
- Correct fit with factory fittings and connectors
- Maintains the fuel delivery your engine is calibrated for
- Fuel- and ethanol-resistant materials
- Helps keep emissions and vapor systems compliant
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM fuel part, part #3B4-24380-11-00
- Original line sizes, connectors, jets and mounting
- Built for gasoline and ethanol-blend exposure
- Designed for the listed Yamaha models
- Works with factory fuel injection, carburetor and EVAP systems
Materials and Construction
Yamaha fuel parts use ethanol-resistant hose and seals, polyethylene or steel tanks, corrosion-resistant pump, injector and carburetor parts, and fittings that seal under vibration.
Common Reasons Riders Replace This Part
- Fixing hard starting, stalling or hesitation
- Repairing fuel leaks or fuel smell
- Replacing parts damaged by stale or bad fuel
- Restoring emissions and EVAP parts
Signs Your Fuel Pipe Joint Needs Replacing
- Hard starting or long cranking
- Stalling, surging or hesitation under load
- Fuel smell or visible leaks
- Check engine light tied to fuel or EVAP (fuel-injected models)
- Cracked lines, fittings or tank parts
Installation Tips
- Work in a ventilated area away from sparks and relieve fuel pressure first on fuel-injected models.
- Disconnect the battery before working on pumps or wiring.
- Use the Yamaha parts diagram to confirm routing, clamps and O-rings.
- Install with fresh seals and secure every clamp and connector.
- Check for leaks before starting the engine.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #3B4-24380-11-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Fuel Pipe Joint with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Fuel Pipe Joint?
The genuine Yamaha part number is 3B4-24380-11-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #3B4-24380-11-00 fit?
It fits 111 Yamaha Grizzly, Raptor, Rhino, Wolverine and YXZ models from 2008 to 2027. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Can ethanol fuel damage my fuel system?
Ethanol blends attract moisture and can degrade older parts, especially carburetors. Follow your owner's manual for recommended fuel.
Should I replace the fuel filter too?
If your model has a serviceable filter, replacing it during fuel work is a good idea.
Why does it run poorly after sitting?
Stale fuel can varnish carburetor jets, injectors and pumps. Use stabilizer for storage and drain old fuel.
Order Your Genuine Yamaha Fuel Pipe Joint Today
Ride with confidence on parts built for your machine. Order the genuine Yamaha Fuel Pipe Joint, OEM part #3B4-24380-11-00, from Witchdoctors today and keep your Yamaha ATV or side-by-side running the way Yamaha designed it.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.